Standard Output
+++ Running case: MATLAB-517
+++ working dir: /home/jenkins/workspace/Debian_Linux-Basic/nightlylog
| boundary conditions for stressbalance model: spc set as observed velocities
| no smb.mass_balance specified: values set as zero
| no basalforcings.groundedice_melting_rate specified: values set as zero
| no basalforcings.floatingice_melting_rate specified: values set as zero
| no balancethickness.thickening_rate specified: values set as zero
| NOTE: using observed velocities to create constraints along new boundary
| INFO: the outlog will look better if only md.verbose.control is turned on
| uploading input files
| launching solution sequence
| Ice-sheet and Sea-level System Model (ISSM) version 2026.2
| GitHub: https://github.com/ISSMteam/ISSM/
| Documentation: https://issmteam.github.io/ISSM-Documentation/
| Iter Cost function Grad. norm List of contributions
| 1 f(x)= 0.054509 1.32e-07 0.05451 6.124e-15
| 2 f(x)=7.0726e+11 1.78e+06 0.05377 7.073e+11
| 3 f(x)=3.1434e+11 1.19e+06 0.05376 3.143e+11
| 4 f(x)=3.0808e+11 1.18e+06 0.05376 3.081e+11
| 5 f(x)=2.7804e+11 1.12e+06 0.05376 2.78e+11
| 6 f(x)= 1.564e+11 8.39e+05 0.05376 1.564e+11
| 7 f(x)=7.6636e+10 5.87e+05 0.05376 7.664e+10
| 8 f(x)=3.7552e+10 4.11e+05 0.05376 3.755e+10
| 9 f(x)= 1.84e+10 2.88e+05 0.05376 1.84e+10
| 10 f(x)=9.0161e+09 2.01e+05 0.05376 9.016e+09
| 11 f(x)=4.4179e+09 1.41e+05 0.05376 4.418e+09
| 12 f(x)=2.1648e+09 9.87e+04 0.05376 2.165e+09
| 13 f(x)=1.0607e+09 6.91e+04 0.05376 1.061e+09
| 14 f(x)=5.1976e+08 4.84e+04 0.05376 5.198e+08
| 15 f(x)=2.5468e+08 3.39e+04 0.05376 2.547e+08
| 16 f(x)=1.2479e+08 2.37e+04 0.05376 1.248e+08
| 17 f(x)= 6.115e+07 1.66e+04 0.05376 6.115e+07
| 18 f(x)=2.9963e+07 1.16e+04 0.05376 2.996e+07
| 19 f(x)=1.4682e+07 8.13e+03 0.05376 1.468e+07
| 20 f(x)=7.1942e+06 5.69e+03 0.05376 7.194e+06
| 21 f(x)=3.5251e+06 3.98e+03 0.05376 3.525e+06
| 22 f(x)=1.7273e+06 2.79e+03 0.05376 1.727e+06
| 23 f(x)=8.4639e+05 1.95e+03 0.05376 8.464e+05
| 24 f(x)=4.1473e+05 1.37e+03 0.05376 4.147e+05
| 25 f(x)=2.0322e+05 956 0.05376 2.032e+05
| 26 f(x)= 99577 669 0.05376 9.958e+04
| 27 f(x)= 48793 469 0.05376 4.879e+04
| 28 f(x)= 23908 328 0.05376 2.391e+04
| 29 f(x)= 11715 230 0.05376 1.172e+04
| 30 f(x)= 5740.5 161 0.05376 5740
| 31 f(x)= 2812.8 112 0.05376 2813
| 32 f(x)= 1378.3 78.7 0.05376 1378
| 33 f(x)= 675.41 55.1 0.05376 675.4
| 34 f(x)= 330.98 38.6 0.05376 330.9
| 35 f(x)= 162.21 27 0.05376 162.2
| 36 f(x)= 79.508 18.9 0.05376 79.45
| 37 f(x)= 38.986 13.2 0.05376 38.93
| 38 f(x)= 19.131 9.26 0.05376 19.08
| 39 f(x)= 9.4015 6.49 0.05376 9.348
| 40 f(x)= 4.6342 4.54 0.05376 4.58
| Maximum number of function calls exceeded
| write lock file:
| FemModel initialization elapsed time: 0.0241858
| Total Core solution elapsed time: 1.01738
| Linear solver elapsed time: 0.205609 (20%)
| Total elapsed time: 0 hrs 0 min 1 sec
| ERROR difference: 27 > 6e-11 test id: 517 test name: PigCMBFSm1qn3 field: Gradient
| Arrays have incompatible sizes for this operation.
| Error in runme (line 238)
| error_diff=full(max(abs(archive(:)-field(:)))/(max(abs(archive(:)))+eps)); %disp test result
| Error in matlab_run2 (line 3)
| runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 517 test name: PigCMBFSm1qn3 field: Misfits
| SUCCESS difference: 2.5e-10 < 5e-10 test id: 517 test name: PigCMBFSm1qn3 field: MaterialsRheologyB
| SUCCESS difference: 1.9e-11 < 1e-09 test id: 517 test name: PigCMBFSm1qn3 field: Pressure
| SUCCESS difference: 6.6e-12 < 2e-11 test id: 517 test name: PigCMBFSm1qn3 field: Vel
| SUCCESS difference: 9.4e-12 < 5e-11 test id: 517 test name: PigCMBFSm1qn3 field: Vx
| SUCCESS difference: 6.4e-12 < 2e-11 test id: 517 test name: PigCMBFSm1qn3 field: Vy
+++ exit code: 0
