[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message:
Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test480.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test480 (line 13)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 480 test name: TransientFrictionTsai field: N/A
----------------finished:480-----------------------
----------------starting:481-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test481.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test481 (line 13)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 481 test name: TransientFrictionSchoof field: N/A
----------------finished:481-----------------------
----------------starting:491-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test491.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test491 (line 19)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 491 test name: SquareSheetShelfTranMeltArtDiff field: N/A
----------------finished:491-----------------------
----------------starting:492-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message:
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test492.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test492 (line 19)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 492 test name: SquareSheetShelfTranMeltStreamlineUpwind field: N/A
----------------finished:492-----------------------
----------------starting:493-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.463151
Total Core solution elapsed time: 3.91523
Linear solver elapsed time: 3.60001 (92%)
Total elapsed time: 0 hrs 0 min 4 sec
SUCCESS difference: 1.2e-14 < 2e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: Vx1
SUCCESS difference: 4.4e-15 < 2e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: Vy1
SUCCESS difference: 4.3e-15 < 2e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: Vel1
SUCCESS difference: 0 < 1e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: Pressure1
SUCCESS difference: 2.5e-15 < 1e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: Bed1
SUCCESS difference: 5.4e-15 < 1e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: Surface1
SUCCESS difference: 2.2e-15 < 1e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: Thickness1
SUCCESS difference: 0 < 1e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: GroundedArea1
SUCCESS difference: 0 < 1e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: FloatingArea1
SUCCESS difference: 0 < 1e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: TotalFloatingBmb1
SUCCESS difference: 0 < 1e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: TotalGroundedBmb1
SUCCESS difference: 0 < 1e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: TotalSmb1
SUCCESS difference: 1.5e-14 < 2e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: Vx2
SUCCESS difference: 9.2e-15 < 2e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: Vy2
SUCCESS difference: 9.8e-15 < 2e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: Vel2
SUCCESS difference: 2.2e-15 < 1e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: Pressure2
SUCCESS difference: 2.3e-15 < 1e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: Bed2
SUCCESS difference: 1.2e-14 < 1e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: Surface2
SUCCESS difference: 1.1e-14 < 1e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: Thickness2
SUCCESS difference: 0 < 1e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: GroundedArea2
SUCCESS difference: 0 < 1e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: FloatingArea2
SUCCESS difference: 0 < 1e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: TotalFloatingBmb2
SUCCESS difference: 0 < 1e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: TotalGroundedBmb2
SUCCESS difference: 0 < 1e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: TotalSmb2
SUCCESS difference: 5.2e-14 < 2e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: Vx3
SUCCESS difference: 3.4e-14 < 2e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: Vy3
SUCCESS difference: 3.5e-14 < 2e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: Vel3
SUCCESS difference: 8.3e-15 < 1e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: Pressure3
SUCCESS difference: 2.1e-14 < 1e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: Bed3
SUCCESS difference: 3.9e-14 < 2e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: Surface3
SUCCESS difference: 3.2e-14 < 2e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: Thickness3
SUCCESS difference: 0 < 1e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: GroundedArea3
SUCCESS difference: 0 < 1e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: FloatingArea3
SUCCESS difference: 0 < 1e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: TotalFloatingBmb3
SUCCESS difference: 0 < 1e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: TotalGroundedBmb3
SUCCESS difference: 0 < 1e-13 test id: 493 test name: SquareSheetShelfTranMeltDG field: TotalSmb3
----------------finished:493-----------------------
----------------starting:494-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.390202
Total Core solution elapsed time: 3.7619
Linear solver elapsed time: 3.11832 (83%)
Total elapsed time: 0 hrs 0 min 4 sec
SUCCESS difference: 1.5e-14 < 2e-13 test id: 494 test name: SquareSheetShelfTranMeltFCT field: Vx1
SUCCESS difference: 6.5e-15 < 2e-13 test id: 494 test name: SquareSheetShelfTranMeltFCT field: Vy1
SUCCESS difference: 6.3e-15 < 2e-13 test id: 494 test name: SquareSheetShelfTranMeltFCT field: Vel1
SUCCESS difference: 0 < 1e-13 test id: 494 test name: SquareSheetShelfTranMeltFCT field: Pressure1
SUCCESS difference: 1.8e-15 < 1e-13 test id: 494 test name: SquareSheetShelfTranMeltFCT field: Bed1
SUCCESS difference: 4.6e-15 < 1e-13 test id: 494 test name: SquareSheetShelfTranMeltFCT field: Surface1
SUCCESS difference: 3.3e-15 < 1e-13 test id: 494 test name: SquareSheetShelfTranMeltFCT field: Thickness1
SUCCESS difference: 0 < 1e-13 test id: 494 test name: SquareSheetShelfTranMeltFCT field: GroundedArea1
SUCCESS difference: 0 < 1e-13 test id: 494 test name: SquareSheetShelfTranMeltFCT field: FloatingArea1
SUCCESS difference: 0 < 1e-13 test id: 494 test name: SquareSheetShelfTranMeltFCT field: TotalFloatingBmb1
SUCCESS difference: 0 < 1e-13 test id: 494 test name: SquareSheetShelfTranMeltFCT field: TotalGroundedBmb1
SUCCESS difference: 0 < 1e-13 test id: 494 test name: SquareSheetShelfTranMeltFCT field: TotalSmb1
SUCCESS difference: 6.6e-15 < 2e-13 test id: 494 test name: SquareSheetShelfTranMeltFCT field: Vx2
SUCCESS difference: 1.2e-14 < 2e-13 test id: 494 test name: SquareSheetShelfTranMeltFCT field: Vy2
SUCCESS difference: 1.2e-14 < 2e-13 test id: 494 test name: SquareSheetShelfTranMeltFCT field: Vel2
SUCCESS difference: 3.3e-15 < 1e-13 test id: 494 test name: SquareSheetShelfTranMeltFCT field: Pressure2
SUCCESS difference: 5.6e-15 < 1e-13 test id: 494 test name: SquareSheetShelfTranMeltFCT field: Bed2
SUCCESS difference: 8.9e-15 < 1e-13 test id: 494 test name: SquareSheetShelfTranMeltFCT field: Surface2
SUCCESS difference: 8.3e-15 < 1e-13 test id: 494 test name: SquareSheetShelfTranMeltFCT field: Thickness2
SUCCESS difference: 0 < 1e-13 test id: 494 test name: SquareSheetShelfTranMeltFCT field: GroundedArea2
SUCCESS difference: 0 < 1e-13 test id: 494 test name: SquareSheetShelfTranMeltFCT field: FloatingArea2
SUCCESS difference: 0 < 1e-13 test id: 494 test name: SquareSheetShelfTranMeltFCT field: TotalFloatingBmb2
SUCCESS difference: 0 < 1e-13 test id: 494 test name: SquareSheetShelfTranMeltFCT field: TotalGroundedBmb2
SUCCESS difference: 0 < 1e-13 test id: 494 test name: SquareSheetShelfTranMeltFCT field: TotalSmb2
SUCCESS difference: 2.4e-14 < 2e-13 test id: 494 test name: SquareSheetShelfTranMeltFCT field: Vx3
SUCCESS difference: 2.5e-14 < 2e-13 test id: 494 test name: SquareSheetShelfTranMeltFCT field: Vy3
SUCCESS difference: 2.5e-14 < 2e-13 test id: 494 test name: SquareSheetShelfTranMeltFCT field: Vel3
SUCCESS difference: 8.3e-15 < 1e-13 test id: 494 test name: SquareSheetShelfTranMeltFCT field: Pressure3
SUCCESS difference: 3.2e-15 < 2e-13 test id: 494 test name: SquareSheetShelfTranMeltFCT field: Bed3
SUCCESS difference: 4.1e-14 < 5e-13 test id: 494 test name: SquareSheetShelfTranMeltFCT field: Surface3
SUCCESS difference: 8.3e-14 < 1e-12 test id: 494 test name: SquareSheetShelfTranMeltFCT field: Thickness3
SUCCESS difference: 0 < 1e-13 test id: 494 test name: SquareSheetShelfTranMeltFCT field: GroundedArea3
SUCCESS difference: 0 < 1e-13 test id: 494 test name: SquareSheetShelfTranMeltFCT field: FloatingArea3
SUCCESS difference: 0 < 1e-13 test id: 494 test name: SquareSheetShelfTranMeltFCT field: TotalFloatingBmb3
SUCCESS difference: 0 < 1e-13 test id: 494 test name: SquareSheetShelfTranMeltFCT field: TotalGroundedBmb3
SUCCESS difference: 0 < 1e-13 test id: 494 test name: SquareSheetShelfTranMeltFCT field: TotalSmb3
----------------finished:494-----------------------
----------------starting:495-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test495.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test495 (line 19)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 495 test name: SquareSheetShelfTranMeltSUPG field: N/A
----------------finished:495-----------------------
----------------starting:501-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.309946
Total Core solution elapsed time: 0.620135
Linear solver elapsed time: 0.570929 (92%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 1.9e-15 < 1e-12 test id: 501 test name: PigStressSSA2d field: Vx
SUCCESS difference: 4.4e-16 < 2e-12 test id: 501 test name: PigStressSSA2d field: Vy
SUCCESS difference: 7.3e-16 < 2e-12 test id: 501 test name: PigStressSSA2d field: Vel
SUCCESS difference: 1.1e-16 < 1e-13 test id: 501 test name: PigStressSSA2d field: Pressure
----------------finished:501-----------------------
----------------starting:502-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[2] ??? Error using ==> ./classes/Params/Parameters.cpp:279
[2] FindParam error message: Parameter GroundinglineNomeltUnderLakes not set
[0] ??? Error using ==> ./classes/Params/Parameters.cpp:279
[0] FindParam error message: Parameter GroundinglineNomeltUnderLakes not set
[1] ??? Error using ==> ./classes/Params/Parameters.cpp:279
[1] FindParam error message: Parameter GroundinglineNomeltUnderLakes not set
Error using loadresultsfromdisk
=========================================================================
Binary file test502.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test502 (line 8)
md=solve(md,'Stressbalance');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 502 test name: PigStressHO field: N/A
----------------finished:502-----------------------
----------------starting:503-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[1] ??? Error using ==> ./classes/Params/Parameters.cpp:279
[1] FindParam error message: Parameter GroundinglineNomeltUnderLakes not set
[0] ??? Error using ==> ./classes/Params/Parameters.cpp:279
[0] FindParam error message: Parameter GroundinglineNomeltUnderLakes not set
[2] ??? Error using ==> ./classes/Params/Parameters.cpp:279
[2] FindParam error message: Parameter GroundinglineNomeltUnderLakes not set
Error using loadresultsfromdisk
=========================================================================
Binary file test503.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test503 (line 8)
md=solve(md,'Stressbalance');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 503 test name: PigStressFS field: N/A
----------------finished:503-----------------------
----------------starting:504-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
Warning: expecting coordinates in polar stereographic (Std Latitude: 71S Meridian: 0)
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test504.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test504 (line 11)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 504 test name: PigTranSSA2d field: N/A
----------------finished:504-----------------------
----------------starting:505-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test505.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test505 (line 8)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 505 test name: PigTranSSA3d field: N/A
----------------finished:505-----------------------
----------------starting:506-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[0] ??? Error using ==>
[./analyses/MasstransportAnalysis.cpp:720
[10] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test506.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test506 (line 10)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 506 test name: PigTranHO field: N/A
----------------finished:506-----------------------
----------------starting:507-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test507.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test507 (line 9)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 507 test name: PigTranFS field: N/A
----------------finished:507-----------------------
----------------starting:508-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./classes/Params/Parameters.cpp:279
[0] FindParam error message: Parameter GroundinglineNomeltUnderLakes not set
[2] ??? Error using ==> ./classes/Params/Parameters.cpp:279
[2] FindParam error message: Parameter GroundinglineNomeltUnderLakes not set
[1] ??? Error using ==> ./classes/Params/Parameters.cpp:279
[1] FindParam error message: Parameter GroundinglineNomeltUnderLakes not set
Error using loadresultsfromdisk
=========================================================================
Binary file test508.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test508 (line 9)
md=solve(md,'Steadystate');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 508 test name: PigSteaSSA3d field: N/A
----------------finished:508-----------------------
----------------starting:509-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[2] ??? Error using ==> ./classes/Params/Parameters.cpp:279
[2] FindParam error message: Parameter GroundinglineNomeltUnderLakes not set
[1] ??? Error using ==> ./classes/Params/Parameters.cpp:279
[1] FindParam error message: Parameter GroundinglineNomeltUnderLakes not set
Error using loadresultsfromdisk
=========================================================================
Binary file test509.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test509 (line 10)
md=solve(md,'Steadystate');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 509 test name: PigSteaHO field: N/A
----------------finished:509-----------------------
----------------starting:510-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./classes/Params/Parameters.cpp:279
[0] FindParam error message: Parameter GroundinglineNomeltUnderLakes not set
[2] ??? Error using ==> ./classes/Params/Parameters.cpp:279
[2] FindParam error message: Parameter GroundinglineNomeltUnderLakes not set
[1] ??? Error using ==> ./classes/Params/Parameters.cpp:279
[1] FindParam error message: Parameter GroundinglineNomeltUnderLakes not set
Error using loadresultsfromdisk
=========================================================================
Binary file test510.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test510 (line 9)
md=solve(md,'Steadystate');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 510 test name: PigSteaFS field: N/A
----------------finished:510-----------------------
----------------starting:511-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
NOTE: using observed velocities to create constraints along new boundary
INFO: the outlog will look better if only md.verbose.control is turned on
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./classes/Params/Parameters.cpp:279
[0] FindParam error message: Parameter GroundinglineNomeltUnderLakes not set
Error using loadresultsfromdisk
=========================================================================
Binary file test511.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test511 (line 27)
md=solve(md,'Stressbalance');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 511 test name: PigCMBFS field: N/A
----------------finished:511-----------------------
----------------starting:512-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
INFO: the outlog will look better if only md.verbose.control is turned on
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
x | Cost function f(x) | List of contributions
====================== step 1/2 ===============================
x = 0 | f(x) = 125.7301 | 125.7294 0.0006420665
x = 1 | f(x) = 119.1969 | 119.1962 0.0006447865
====================== step 2/2 ===============================
x = 0 | f(x) = 119.1154 | 119.1148 0.0006447865
x = 1 | f(x) = 112.5636 | 112.563 0.0006652195
[2] ??? Error using ==> ./classes/Params/Parameters.cpp:279
[2] FindParam error message: Parameter GroundinglineNomeltUnderLakes not set
[0] ??? Error using ==> ./classes/Params/Parameters.cpp:279
[0] FindParam error message: Parameter GroundinglineNomeltUnderLakes not set
[1] ??? Error using ==> ./classes/Params/Parameters.cpp:279
[1] FindParam error message: Parameter GroundinglineNomeltUnderLakes not set
Error using loadresultsfromdisk
=========================================================================
Binary file test512.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test512 (line 22)
md=solve(md,'Stressbalance');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 512 test name: PigCMDragHO field: N/A
----------------finished:512-----------------------
----------------starting:513-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
INFO: the outlog will look better if only md.verbose.control is turned on
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
x | Cost function f(x) | List of contributions
====================== step 1/2 ===============================
x = 0 |
[2] ??? Error using ==> ./classes/Params/Parameters.cpp:279
[2] FindParam error message: Parameter GroundinglineNomeltUnderLakes not set
===================================================================================
= BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES
= PID 75201 RUNNING AT ISSM-Jenkins-Intel-Mac-Mini.local
= EXIT CODE: 9
= CLEANING UP REMAINING PROCESSES
= YOU CAN IGNORE THE BELOW CLEANUP MESSAGES
===================================================================================
YOUR APPLICATION TERMINATED WITH THE EXIT STRING: Killed: 9 (signal 9)
This typically refers to a problem with your application.
Please see the FAQ page for debugging suggestions
Error using loadresultsfromdisk
=========================================================================
Binary file test513.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test513 (line 24)
md=solve(md,'Steadystate');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 513 test name: PigCMDragSteaSSA3d field: N/A
----------------finished:513-----------------------
----------------starting:514-----------------------
Construction of a mesh from a given geometry
Construction of a mesh from a given geometry
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
Anisotropic mesh adaptation
new number of triangles = 485
Anisotropic mesh adaptation
new number of triangles = 485
Anisotropic mesh adaptation
new number of triangles = 1651
Anisotropic mesh adaptation
new number of triangles = 6702
Anisotropic mesh adaptation
new number of triangles = 2307
SUCCESS difference: 0 < 2e-10 test id: 514 test name: PigBamgMesh field: x1
SUCCESS difference: 0 < 7e-10 test id: 514 test name: PigBamgMesh field: y1
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: x2
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: y2
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: x3
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: y3
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: x4
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: y4
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: x5
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: y5
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: x6
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: y6
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: x7
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: y7
----------------finished:514-----------------------
----------------starting:515-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.233945
Total Core solution elapsed time: 1.48786
Linear solver elapsed time: 0.795078 (53%)
Total elapsed time: 0 hrs 0 min 1 sec
WARNING! There are options you set that were not used!
WARNING! could be spelling mistake, etc!
There are 7 unused database options. They are:
Option left: name:-ksp_type value: preonly source: code
Option left: name:-mat_mumps_icntl_14 value: 120 source: code
Option left: name:-mat_mumps_icntl_28 value: 2 source: code
Option left: name:-mat_mumps_icntl_29 value: 2 source: code
Option left: name:-mat_type value: mpiaij source: code
Option left: name:-pc_factor_mat_solver_type value: mumps source: code
Option left: name:-pc_type value: lu source: code
SUCCESS difference: 1.8e-15 < 1e-13 test id: 515 test name: PigTherTranSUPG field: Temperature1
SUCCESS difference: 2.6e-20 < 1e-08 test id: 515 test name: PigTherTranSUPG field: BasalforcingsGroundediceMeltingRate1
SUCCESS difference: 2.3e-15 < 1e-13 test id: 515 test name: PigTherTranSUPG field: Temperature2
SUCCESS difference: 2.1e-16 < 5e-08 test id: 515 test name: PigTherTranSUPG field: BasalforcingsGroundediceMeltingRate2
----------------finished:515-----------------------
----------------starting:516-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.159463
Total Core solution elapsed time: 0.621254
Linear solver elapsed time: 0.447645 (72%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 3.4e-13 < 1e-11 test id: 516 test name: PigTherSteaSUPG field: Temperature
SUCCESS difference: 1.2e-12 < 1e-11 test id: 516 test name: PigTherSteaSUPG field: BasalforcingsGroundediceMeltingRate
----------------finished:516-----------------------
----------------starting:517-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
NOTE: using observed velocities to create constraints along new boundary
INFO: the outlog will look better if only md.verbose.control is turned on
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Iter Cost function Grad. norm List of contributions
[0] ??? Error using ==> ./classes/Params/Parameters.cpp:279
[0] FindParam error message: Parameter GroundinglineNomeltUnderLakes not set
Error using loadresultsfromdisk
=========================================================================
Binary file test517.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test517 (line 29)
md=solve(md,'Stressbalance');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 517 test name: PigCMBFSm1qn3 field: N/A
----------------finished:517-----------------------
----------------starting:518-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.248665
Total Core solution elapsed time: 1.5739
Linear solver elapsed time: 1.41572 (90%)
Total elapsed time: 0 hrs 0 min 1 sec
SUCCESS difference: 1e-15 < 5e-13 test id: 518 test name: PigStressMOLHO2d field: Vx
SUCCESS difference: 5.2e-16 < 6e-13 test id: 518 test name: PigStressMOLHO2d field: Vy
SUCCESS difference: 5e-16 < 6e-13 test id: 518 test name: PigStressMOLHO2d field: Vel
SUCCESS difference: 0 < 1e-13 test id: 518 test name: PigStressMOLHO2d field: Pressure
SUCCESS difference: 1.1e-15 < 5e-13 test id: 518 test name: PigStressMOLHO2d field: VxSurface
SUCCESS difference: 5.2e-16 < 6e-13 test id: 518 test name: PigStressMOLHO2d field: VySurface
SUCCESS difference: 6.5e-16 < 1e-13 test id: 518 test name: PigStressMOLHO2d field: VxShear
SUCCESS difference: 5.3e-16 < 1e-13 test id: 518 test name: PigStressMOLHO2d field: VyShear
SUCCESS difference: 1.1e-15 < 5e-13 test id: 518 test name: PigStressMOLHO2d field: VxBase
SUCCESS difference: 5.2e-16 < 6e-13 test id: 518 test name: PigStressMOLHO2d field: VyBase
----------------finished:518-----------------------
----------------starting:519-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
Warning: expecting coordinates in polar stereographic (Std Latitude: 71S Meridian: 0)
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test519.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test519 (line 12)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 519 test name: PigTranMOLHO2d field: N/A
----------------finished:519-----------------------
----------------starting:520-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
Warning: expecting coordinates in polar stereographic (Std Latitude: 71S Meridian: 0)
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test520.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test520 (line 17)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 520 test name: PigTran-IntrusionMelt field: N/A
----------------finished:520-----------------------
----------------starting:521-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
checking model consistency
INFO: the outlog will look better if only md.verbose.control is turned on
marshalling file /Users/jenkins/workspace/macOS-Intel-Basic//execution/test521-06-30-2026-05-08-49-29096/test521.bin
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
call computational core:
=== NUDGING STEP 1/3 ===
iteration 1/2 time [yr]: 0.50 (time step: 0.50)
computing smb
computing new velocity
computing basal mass balance
computing mass transport
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
loading results from cluster
Error using loadresultsfromdisk
=========================================================================
Binary file test521.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test521 (line 31)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 521 test name: PigNudgingSSA2d field: N/A
----------------finished:521-----------------------
----------------starting:530-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.217163
Total Core solution elapsed time: 0.640549
Linear solver elapsed time: 0.539972 (84%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 4.2e-16 < 1e-13 test id: 530 test name: PigBalVel1 field: DrivingStressX
SUCCESS difference: 7.7e-16 < 1e-13 test id: 530 test name: PigBalVel1 field: DrivingStressX
SUCCESS difference: 0 < 1e-13 test id: 530 test name: PigBalVel1 field: Vel
----------------finished:530-----------------------
----------------starting:531-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.123266
Total Core solution elapsed time: 0.498049
Linear solver elapsed time: 0.431691 (87%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 4.2e-16 < 1e-13 test id: 531 test name: PigBalVel2 field: DrivingStressX
SUCCESS difference: 5.9e-16 < 1e-13 test id: 531 test name: PigBalVel2 field: DrivingStressX
SUCCESS difference: 0 < 1e-13 test id: 531 test name: PigBalVel2 field: Vel
----------------finished:531-----------------------
----------------starting:540-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message:
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test540.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test540 (line 24)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 540 test name: PigTranCalvingDevSSA2d field: N/A
----------------finished:540-----------------------
----------------starting:541-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test541.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test541 (line 24)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 541 test name: PigTranCalvingDevHO3d field: N/A
----------------finished:541-----------------------
----------------starting:542-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0]
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test542.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test542 (line 43)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 542 test name: PigTranFrontalforcingsrignot field: N/A
----------------finished:542-----------------------
----------------starting:543-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
stochasticforcing.stocahstictimestep not specified: set to md.timestepping.time_step
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0]
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test543.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test543 (line 123)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 543 test name: PigTranRignotarma field: N/A
----------------finished:543-----------------------
----------------starting:544-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
smb.lapserates not specified: set to 0
stochasticforcing.stocahstictimestep not specified: set to md.timestepping.time_step
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test544.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test544 (line 99)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 544 test name: PigTranARMAandStochasticforcings field: N/A
----------------finished:544-----------------------
----------------starting:545-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
stochasticforcing.stocahstictimestep not specified: set to md.timestepping.time_step
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test545.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test545 (line 89)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 545 test name: PigTranStochasticforcingCovariance field: N/A
----------------finished:545-----------------------
----------------starting:546-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
smb.lapserates not specified: set to 0
stochasticforcing.stocahstictimestep not specified: set to md.timestepping.time_step
WARNING: md.timestepping.interp_forcing is 1, but be aware that there is no interpolation between covariance matrices
the changes between covariance matrices occur at the time steps specified in md.stochasticforcing.timecovariance
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test546.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test546 (line 109)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 546 test name: PigTranMultcovStochasticforcings field: N/A
----------------finished:546-----------------------
----------------starting:550-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 4.44117
Total Core solution elapsed time: 83.0917
Linear solver elapsed time: 62.4301 (75%)
Total elapsed time: 0 hrs 1 min 27 sec
SUCCESS difference: 1.8e-14 < 1e-13 test id: 550 test name: PigShakti field: HydrologyHead1
SUCCESS difference: 8.2e-16 < 1e-13 test id: 550 test name: PigShakti field: HydrologyGapHeight1
SUCCESS difference: 2.3e-14 < 1e-13 test id: 550 test name: PigShakti field: EffectivePressure1
----------------finished:550-----------------------
----------------starting:601-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
===================================================================================
= BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES
= PID 20429 RUNNING AT ISSM-Jenkins-Intel-Mac-Mini.local
= EXIT CODE: 9
= CLEANING UP REMAINING PROCESSES
= YOU CAN IGNORE THE BELOW CLEANUP MESSAGES
===================================================================================
YOUR APPLICATION TERMINATED WITH THE EXIT STRING: Killed: 9 (signal 9)
This typically refers to a problem with your application.
Please see the FAQ page for debugging suggestions
Error using loadresultsfromdisk
=========================================================================
Binary file test601.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test601 (line 7)
md=solve(md,'Masstransport');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 601 test name: 79NorthMasstransp2d field: N/A
----------------finished:601-----------------------
----------------starting:602-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.062833
Total Core solution elapsed time: 0.080617
Linear solver elapsed time: 0.062661 (78%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 1.1e-15 < 1e-13 test id: 602 test name: 79NorthMasstransp2dDG field: Thickness
----------------finished:602-----------------------
----------------starting:603-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test603.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test603 (line 8)
md=solve(md,'Masstransport');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 603 test name: 79NorthMasstransp3d field: N/A
----------------finished:603-----------------------
----------------starting:604-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.063255
Total Core solution elapsed time: 0.373446
Linear solver elapsed time: 0.300004 (80%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 5.4e-16 < 1e-13 test id: 604 test name: 79NorthSurfSlop2d field: SurfaceSlopeX
SUCCESS difference: 4.8e-16 < 1e-13 test id: 604 test name: 79NorthSurfSlop2d field: SurfaceSlopeY
----------------finished:604-----------------------
----------------starting:605-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.136893
Total Core solution elapsed time: 0.267055
Linear solver elapsed time: 0.237695 (89%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 5.4e-16 < 1e-13 test id: 605 test name: 79NorthSurfSlop3d field: SurfaceSlopeX
SUCCESS difference: 4.8e-16 < 1e-13 test id: 605 test name: 79NorthSurfSlop3d field: SurfaceSlopeY
----------------finished:605-----------------------
----------------starting:606-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.143717
Total Core solution elapsed time: 0.384567
Linear solver elapsed time: 0.07461 (19%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 5.6e-16 < 1e-13 test id: 606 test name: 79NorthBedSlop2d field: BedSlopeX
SUCCESS difference: 4.2e-16 < 1e-13 test id: 606 test name: 79NorthBedSlop2d field: BedSlopeY
----------------finished:606-----------------------
----------------starting:607-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.074525
Total Core solution elapsed time: 0.168589
Linear solver elapsed time: 0.120466 (71%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 5.6e-16 < 1e-13 test id: 607 test name: 79NorthBedSlop3d field: BedSlopeX
SUCCESS difference: 4.2e-16 < 1e-13 test id: 607 test name: 79NorthBedSlop3d field: BedSlopeY
----------------finished:607-----------------------
----------------starting:608-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.046666
Total Core solution elapsed time: 0.123047
Linear solver elapsed time: 0.082157 (67%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 6.5e-16 < 1e-12 test id: 608 test name: 79NorthBalThic2d field: Thickness
----------------finished:608-----------------------
----------------starting:610-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.037227
Total Core solution elapsed time: 0.003607
Linear solver elapsed time: 0 (0%)
Total elapsed time: 0 hrs 0 min 0 sec
WARNING! There are options you set that were not used!
WARNING! could be spelling mistake, etc!
There are 7 unused database options. They are:
Option left: name:-ksp_type value: preonly source: code
Option left: name:-mat_mumps_icntl_14 value: 120 source: code
Option left: name:-mat_mumps_icntl_28 value: 2 source: code
Option left: name:-mat_mumps_icntl_29 value: 2 source: code
Option left: name:-mat_type value: mpiaij source: code
Option left: name:-pc_factor_mat_solver_type value: mumps source: code
Option left: name:-pc_type value: lu source: code
SUCCESS difference: 0 < 1e-12 test id: 610 test name: 79NorthPISMhydro field: WaterColumn1
SUCCESS difference: 0 < 1e-12 test id: 610 test name: 79NorthPISMhydro field: WaterColumn2
SUCCESS difference: 0 < 1e-12 test id: 610 test name: 79NorthPISMhydro field: WaterColumn3
----------------finished:610-----------------------
----------------starting:611-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
INFO: the outlog will look better if only md.verbose.control is turned on
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
x | Cost function f(x) | List of contributions
====================== step 1/2 ===============================
x = 0 | f(x) = 5.576527e+15 | 5.576527e+15
x = 1 | f(x) = 2.800818e+15 | 2.800818e+15
====================== step 2/2 ===============================
x = 0 | f(x) = 2.800818e+15 | 2.800818e+15
x = 1 | f(x) = 9.878839e+14 | 9.878839e+14
write lock file:
FemModel initialization elapsed time: 0.077614
Total Core solution elapsed time: 0.304892
Linear solver elapsed time: 0.193158 (63%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 1e-15 < 1e-12 test id: 611 test name: 79NorthCMBalThic2dCG field: Gradient
SUCCESS difference: 5.4e-16 < 1e-12 test id: 611 test name: 79NorthCMBalThic2dCG field: Misfits
SUCCESS difference: 1.1e-15 < 1e-12 test id: 611 test name: 79NorthCMBalThic2dCG field: BalancethicknessThickeningRate
SUCCESS difference: 5.9e-16 < 1e-12 test id: 611 test name: 79NorthCMBalThic2dCG field: Thickness
----------------finished:611-----------------------
----------------starting:612-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.114397
Total Core solution elapsed time: 0.630058
Linear solver elapsed time: 0.521772 (83%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 4.4e-14 < 2e-11 test id: 612 test name: 79NorthPISMhydrofriction field: Vx1
SUCCESS difference: 1.1e-14 < 2e-11 test id: 612 test name: 79NorthPISMhydrofriction field: Vx2
SUCCESS difference: 5.2e-13 < 2e-11 test id: 612 test name: 79NorthPISMhydrofriction field: Vx3
SUCCESS difference: 5e-14 < 2e-11 test id: 612 test name: 79NorthPISMhydrofriction field: Vy1
SUCCESS difference: 1.3e-14 < 2e-11 test id: 612 test name: 79NorthPISMhydrofriction field: Vy2
SUCCESS difference: 4.3e-13 < 2e-11 test id: 612 test name: 79NorthPISMhydrofriction field: Vy3
SUCCESS difference: 5e-14 < 2e-11 test id: 612 test name: 79NorthPISMhydrofriction field: Vel1
SUCCESS difference: 1e-14 < 2e-11 test id: 612 test name: 79NorthPISMhydrofriction field: Vel2
SUCCESS difference: 4.4e-13 < 2e-11 test id: 612 test name: 79NorthPISMhydrofriction field: Vel3
----------------finished:612-----------------------
----------------starting:613-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
NOTE: using initial velocities to create constraints along new boundary
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
preparing initial solution
x | Cost function f(x) | List of contributions
====================== step 1/2 ===============================
x = 0 | f(x) = 5.931532e+14 | 5.931532e+14
x = 1 | f(x) = 5.011022e+14 | 5.011022e+14
====================== step 2/2 ===============================
x = 0 | f(x) = 5.011022e+14 | 5.011022e+14
x = 1 | f(x) = 4.265126e+14 | 4.265126e+14
preparing final solution
write lock file:
FemModel initialization elapsed time: 0.056766
Total Core solution elapsed time: 0.304685
Linear solver elapsed time: 0.186521 (61%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 9.1e-16 < 1e-12 test id: 613 test name: 79NorthCMBalThicVxVy field: Gradient1
SUCCESS difference: 1.2e-15 < 1e-12 test id: 613 test name: 79NorthCMBalThicVxVy field: Gradient2
SUCCESS difference: 3.7e-16 < 1e-12 test id: 613 test name: 79NorthCMBalThicVxVy field: Misfits
SUCCESS difference: 6.9e-17 < 1e-12 test id: 613 test name: 79NorthCMBalThicVxVy field: Vx
SUCCESS difference: 1.1e-16 < 1e-12 test id: 613 test name: 79NorthCMBalThicVxVy field: Vy
SUCCESS difference: 6.3e-16 < 1e-12 test id: 613 test name: 79NorthCMBalThicVxVy field: Thickness
----------------finished:613-----------------------
----------------starting:621-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
stochasticforcing.stocahstictimestep not specified: set to md.timestepping.time_step
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test621.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test621 (line 49)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 621 test name: 79NorthStochFrictionWaterPressure field: N/A
----------------finished:621-----------------------
----------------starting:622-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
smb.lapserates not specified: set to 0
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test622.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test622 (line 85)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 622 test name: 79NorthHydrologyArmapw field: N/A
----------------finished:622-----------------------
----------------starting:701-----------------------
Construction of a mesh from a given geometry
====== Testing MINI Full-Stokes Finite element =====
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
solver residue: norm(KU-F)/norm(F)=1.39135e-16
solver residue: norm(KU-F)/norm(F)=8.7784e-16
solver residue: norm(KU-F)/norm(F)=9.72622e-17
[0] ??? Error using ==> ./classes/Params/Parameters.cpp:279
[0] FindParam error message: Parameter GroundinglineNomeltUnderLakes not set
[1] ??? Error using ==> ./classes/Params/Parameters.cpp:279
[1] FindParam error message: Parameter GroundinglineNomeltUnderLakes not set
Error using loadresultsfromdisk
=========================================================================
Binary file test701.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test701 (line 60)
md=solve(md,'Stressbalance');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 701 test name: FlowbandFSshelf field: N/A
----------------finished:701-----------------------
----------------starting:702-----------------------
Construction of a mesh from a given geometry
====== Testing MINI Full-Stokes Finite element =====
checking model consistency
marshalling file /Users/jenkins/workspace/macOS-Intel-Basic//execution/test702-06-30-2026-05-13-37-29096/test702.bin
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
call computational core:
computing new velocity
computing surface slopes
extruding SurfaceSlopeX from base...
computing bed slopes
[0] ??? Error using ==> ./classes/Params/Parameters.cpp:279
[0] FindParam error message: Parameter GroundinglineNomeltUnderLakes not set
loading results from cluster
Error using loadresultsfromdisk
=========================================================================
Binary file test702.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test702 (line 58)
md=solve(md,'Stressbalance');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 702 test name: FlowbandFSsheetshelf field: N/A
----------------finished:702-----------------------
----------------starting:703-----------------------
Construction of a mesh from a given geometry
checking model consistency
marshalling file /Users/jenkins/workspace/macOS-Intel-Basic//execution/test703-06-30-2026-05-13-39-29096/test703.bin
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
call computational core:
iteration 1/6 time [yr]: 0.00 (time step: 0.00)
computing smb
computing new velocity
computing surface slopes
extruding SurfaceSlopeX from base...
computing bed slopes
computing basal mass balance
computing basal mass balance
computing mass transport
call free surface computational core
extruding Base from base...
extruding solution from top...
extruding solution from top...
extruding solution from top...
updating vertices positions
saving temporary results
iteration 2/6 time [yr]: 0.00 (time step: 0.00)
computing smb
computing new velocity
computing surface slopes
extruding SurfaceSlopeX from base...
computing bed slopes
computing basal mass balance
computing basal mass balance
computing mass transport
call free surface computational core
extruding Base from base...
extruding solution from top...
extruding solution from top...
extruding solution from top...
updating vertices positions
saving temporary results
iteration 3/6 time [yr]: 0.00 (time step: 0.00)
computing smb
computing new velocity
computing surface slopes
extruding SurfaceSlopeX from base...
computing bed slopes
computing basal mass balance
computing basal mass balance
computing mass transport
call free surface computational core
extruding Base from base...
extruding solution from top...
extruding solution from top...
extruding solution from top...
updating vertices positions
saving temporary results
iteration 4/6 time [yr]: 0.00 (time step: 0.00)
computing smb
computing new velocity
computing surface slopes
extruding SurfaceSlopeX from base...
computing bed slopes
computing basal mass balance
computing basal mass balance
computing mass transport
call free surface computational core
extruding Base from base...
extruding solution from top...
extruding solution from top...
extruding solution from top...
updating vertices positions
saving temporary results
iteration 5/6 time [yr]: 0.00 (time step: 0.00)
computing smb
computing new velocity
computing surface slopes
extruding SurfaceSlopeX from base...
computing bed slopes
computing basal mass balance
computing basal mass balance
computing mass transport
call free surface computational core
extruding Base from base...
extruding solution from top...
extruding solution from top...
extruding solution from top...
updating vertices positions
saving temporary results
write lock file:
FemModel initialization elapsed time: 0.328999
Total Core solution elapsed time: 23.9357
Linear solver elapsed time: 20.676 (86%)
Total elapsed time: 0 hrs 0 min 24 sec
loading results from cluster
checking model consistency
marshalling file /Users/jenkins/workspace/macOS-Intel-Basic//execution/test703-06-30-2026-05-14-05-29096/test703.bin
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
call computational core:
iteration 1/6 time [yr]: 0.00 (time step: 0.00)
computing smb
computing new velocity
computing surface slopes
extruding SurfaceSlopeX from base...
computing bed slopes
computing basal mass balance
computing basal mass balance
computing mass transport
call free surface computational core
extruding Base from base...
extruding solution from top...
extruding solution from top...
extruding solution from top...
updating vertices positions
saving temporary results
iteration 2/6 time [yr]: 0.00 (time step: 0.00)
computing smb
computing new velocity
computing surface slopes
extruding SurfaceSlopeX from base...
computing bed slopes
computing basal mass balance
computing basal mass balance
computing mass transport
call free surface computational core
extruding Base from base...
extruding solution from top...
extruding solution from top...
extruding solution from top...
updating vertices positions
saving temporary results
iteration 3/6 time [yr]: 0.00 (time step: 0.00)
computing smb
computing new velocity
computing surface slopes
extruding SurfaceSlopeX from base...
computing bed slopes
computing basal mass balance
computing basal mass balance
computing mass transport
call free surface computational core
extruding Base from base...
extruding solution from top...
extruding solution from top...
extruding solution from top...
updating vertices positions
saving temporary results
iteration 4/6 time [yr]: 0.00 (time step: 0.00)
computing smb
computing new velocity
computing surface slopes
extruding SurfaceSlopeX from base...
computing bed slopes
computing basal mass balance
computing basal mass balance
computing mass transport
call free surface computational core
extruding Base from base...
extruding solution from top...
extruding solution from top...
extruding solution from top...
updating vertices positions
saving temporary results
iteration 5/6 time [yr]: 0.00 (time step: 0.00)
computing smb
computing new velocity
computing surface slopes
extruding SurfaceSlopeX from base...
computing bed slopes
computing basal mass balance
computing basal mass balance
computing mass transport
call free surface computational core
extruding Base from base...
extruding solution from top...
extruding solution from top...
extruding solution from top...
updating vertices positions
saving temporary results
write lock file:
FemModel initialization elapsed time: 0.310986
Total Core solution elapsed time: 26.3526
Linear solver elapsed time: 22.3838 (85%)
Total elapsed time: 0 hrs 0 min 26 sec
loading results from cluster
SUCCESS difference: 1.6e-09 < 2e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vx1
SUCCESS difference: 1.6e-09 < 2e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vy1
SUCCESS difference: 1.6e-09 < 2e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vel1
SUCCESS difference: 1.2e-09 < 1e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Pressure1
SUCCESS difference: 2.3e-12 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Bed1
SUCCESS difference: 5e-12 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Surface1
SUCCESS difference: 1.4e-14 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Thickness1
SUCCESS difference: 3.4e-10 < 2e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vx2
SUCCESS difference: 3.5e-10 < 2e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vy2
SUCCESS difference: 3.5e-10 < 2e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vel2
SUCCESS difference: 2.3e-10 < 1e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Pressure2
SUCCESS difference: 1.9e-12 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Bed2
SUCCESS difference: 4.1e-12 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Surface2
SUCCESS difference: 1.7e-14 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Thickness2
SUCCESS difference: 6.5e-11 < 2e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vx3
SUCCESS difference: 6.2e-11 < 2e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vy3
SUCCESS difference: 6.2e-11 < 2e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vel3
SUCCESS difference: 1.8e-10 < 1e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Pressure3
SUCCESS difference: 1.9e-12 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Bed3
SUCCESS difference: 4.3e-12 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Surface3
SUCCESS difference: 1.2e-14 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Thickness3
SUCCESS difference: 4e-09 < 5e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vx1_damp
SUCCESS difference: 4e-09 < 5e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vy1_damp
SUCCESS difference: 4e-09 < 5e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vel1_damp
SUCCESS difference: 1.5e-09 < 1e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Pressure1_damp
SUCCESS difference: 4.6e-12 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Bed1_damp
SUCCESS difference: 1e-11 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Surface1_damp
SUCCESS difference: 1.7e-14 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Thickness1_damp
SUCCESS difference: 3e-10 < 5e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vx2_damp
SUCCESS difference: 2.8e-10 < 5e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vy2_damp
SUCCESS difference: 2.8e-10 < 5e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vel2_damp
SUCCESS difference: 2e-10 < 1e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Pressure2_damp
SUCCESS difference: 4.9e-12 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Bed2_damp
SUCCESS difference: 1.1e-11 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Surface2_damp
SUCCESS difference: 1.7e-14 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Thickness2_damp
SUCCESS difference: 1.9e-09 < 5e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vx3_damp
SUCCESS difference: 2.1e-09 < 5e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vy3_damp
SUCCESS difference: 2.1e-09 < 5e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vel3_damp
SUCCESS difference: 9.4e-10 < 1e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Pressure3_damp
SUCCESS difference: 6.5e-12 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Bed3_damp
SUCCESS difference: 1.4e-11 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Surface3_damp
SUCCESS difference: 2.4e-14 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Thickness3_damp
----------------finished:703-----------------------
----------------starting:801-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message:
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test801.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test801 (line 17)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 801 test name: ValleyGlacierLevelsetSSA2d field: N/A
----------------finished:801-----------------------
----------------starting:802-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test802.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test802 (line 22)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 802 test name: ValleyGlacierLevelsetThermalSSA3d field: N/A
----------------finished:802-----------------------
----------------starting:803-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test803.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test803 (line 24)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 803 test name: ValleyGlacierLevelsetEnthalpyHO3d field: N/A
----------------finished:803-----------------------
----------------starting:804-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test804.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test804 (line 20)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 804 test name: ValleyGlacierLevelsetCalvingSIA2d field: N/A
----------------finished:804-----------------------
----------------starting:805-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message:
[
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test805.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test805 (line 29)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 805 test name: ValleyGlacierLevelsetEnthCalvingHO3d field: N/A
----------------finished:805-----------------------
----------------starting:806-----------------------
boundary conditions for stressbalance model: spc set as zero
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test806.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test806 (line 37)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 806 test name: SquareShelfLevelsetCalvingSSA2dLevermann field: N/A
----------------finished:806-----------------------
----------------starting:807-----------------------
boundary conditions for stressbalance model: spc set as zero
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test807.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test807 (line 33)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 807 test name: SquareShelfLevelsetMeltingSSA2d field: N/A
----------------finished:807-----------------------
----------------starting:808-----------------------
boundary conditions for stressbalance model: spc set as zero
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test808.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test808 (line 36)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 808 test name: SquareShelfLevelsetCalvingSSA2dMinThickness field: N/A
----------------finished:808-----------------------
----------------starting:809-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Found 0 to flip
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test809.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test809 (line 26)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 809 test name: ValleyGlacierLevelsetCalvingSSA2dCrevassedepth field: N/A
----------------finished:809-----------------------
----------------starting:810-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test810.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test810 (line 18)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 810 test name: ValleyGlacierLevelsetMOLHO2d field: N/A
----------------finished:810-----------------------
----------------starting:811-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test811.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test811 (line 21)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 811 test name: ValleyGlacierLevelsetCalvingMOLHO2d field: N/A
----------------finished:811-----------------------
----------------starting:812-----------------------
boundary conditions for stressbalance model: spc set as zero
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0]
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test812.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test812 (line 38)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 812 test name: SquareShelfLevelsetCalvingMOLHO2dLevermann field: N/A
----------------finished:812-----------------------
----------------starting:813-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1]
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[CreatePVectorCG0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test813.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test813 (line 44)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 813 test name: SquareShelfLevelsetKillberg field: N/A
----------------finished:813-----------------------
----------------starting:814-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Found 38 to flip
Found 44 to flip
Found 51 to flip
Found 53 to flip
Found 47 to flip
Found 46 to flip
Found 41 to flip
Found 34 to flip
Found 30 to flip
Found 21 to flip
Found 15 to flip
Found 2 to flip
Found 0 to flip
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test814.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test814 (line 27)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota')],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 814 test name: SSA2dCDCalvingButtressing field: N/A
----------------finished:814-----------------------
----------------starting:900-----------------------
no hydrology.basal_moulin_input specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.049783
Total Core solution elapsed time: 3.42141
Linear solver elapsed time: 1.50065 (44%)
Total elapsed time: 0 hrs 0 min 3 sec
SUCCESS difference: 1.4e-15 < 1e-13 test id: 900 test name: SquareNoDynUnConfinedHydroDC field: SedimentWaterHead1
SUCCESS difference: 2e-15 < 1e-13 test id: 900 test name: SquareNoDynUnConfinedHydroDC field: SedimentWaterHead2
----------------finished:900-----------------------
----------------starting:901-----------------------
no hydrology.basal_moulin_input specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.046897
Total Core solution elapsed time: 0.078697
Linear solver elapsed time: 0.026488 (34%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 8e-16 < 1e-13 test id: 901 test name: SquareNoDynHydrologyDCOneLayer field: SedimentWaterHead
SUCCESS difference: 5.6e-11 < 3e-10 test id: 901 test name: SquareNoDynHydrologyDCOneLayer field: SedimentHeadResidual
----------------finished:901-----------------------
----------------starting:902-----------------------
no hydrology.basal_moulin_input specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.06815
Total Core solution elapsed time: 1.25704
Linear solver elapsed time: 0.69316 (55%)
Total elapsed time: 0 hrs 0 min 1 sec
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.063789
Total Core solution elapsed time: 0.879115
Linear solver elapsed time: 0.473178 (54%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 7.1e-16 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: SedimentWaterHead1
SUCCESS difference: 0 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: EplWaterHead1
SUCCESS difference: 0 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: SedimentHeadResidual1
SUCCESS difference: 1.1e-15 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: SedimentWaterHead4
SUCCESS difference: 0 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: EplWaterHead4
SUCCESS difference: 0 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: SedimentHeadResidual4
SUCCESS difference: 1.4e-15 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: SedimentWaterHead5
SUCCESS difference: 2.7e-15 < 5e-12 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: EplWaterHead5
SUCCESS difference: 0 < 1e-11 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: SedimentHeadResidual5
SUCCESS difference: 1.4e-15 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: SedimentWaterHead9
SUCCESS difference: 4.7e-15 < 5e-12 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: EplWaterHead9
SUCCESS difference: 0 < 1e-11 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: SedimentHeadResidual9
SUCCESS difference: 4.3e-15 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: EplWaterHead10
SUCCESS difference: 5.2e-15 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: EplWaterHeadSubstep10
SUCCESS difference: 1.3e-15 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: SedimentWaterHead10
SUCCESS difference: 1.4e-15 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: SedimentWaterHeadSubstep10
----------------finished:902-----------------------
----------------starting:903-----------------------
no hydrology.basal_moulin_input specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.068157
Total Core solution elapsed time: 0.062405
Linear solver elapsed time: 0.014639 (23%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 1e-15 < 1e-13 test id: 903 test name: SquareNoDynExtrudedHydrologyDCOneLayer field: SedimentWaterHead
SUCCESS difference: 5.6e-11 < 3e-10 test id: 903 test name: SquareNoDynExtrudedHydrologyDCOneLayer field: SedimentHeadResidual
----------------finished:903-----------------------
----------------starting:904-----------------------
no hydrology.basal_moulin_input specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.157206
Total Core solution elapsed time: 1.30683
Linear solver elapsed time: 0.645392 (49%)
Total elapsed time: 0 hrs 0 min 1 sec
SUCCESS difference: 1e-15 < 1e-13 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: SedimentWaterHead1
SUCCESS difference: 0 < 1e-13 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: EplWaterHead1
SUCCESS difference: 0 < 1e-13 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: SedimentHeadResidual1
SUCCESS difference: 1.1e-15 < 1e-13 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: SedimentWaterHead4
SUCCESS difference: 0 < 1e-13 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: EplWaterHead4
SUCCESS difference: 0 < 1e-13 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: SedimentHeadResidual4
SUCCESS difference: 1.4e-15 < 1e-13 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: SedimentWaterHead5
SUCCESS difference: 3e-15 < 5e-12 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: EplWaterHead5
SUCCESS difference: 0 < 2e-11 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: SedimentHeadResidual5
SUCCESS difference: 1.4e-15 < 1e-13 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: SedimentWaterHead9
SUCCESS difference: 4.7e-15 < 5e-12 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: EplWaterHead9
SUCCESS difference: 0 < 2e-11 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: SedimentHeadResidual9
----------------finished:904-----------------------
----------------starting:905-----------------------
no hydrology.basal_moulin_input specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.06848
Total Core solution elapsed time: 4.67112
Linear solver elapsed time: 1.5198 (33%)
Total elapsed time: 0 hrs 0 min 4 sec
WARNING! There are options you set that were not used!
WARNING! could be spelling mistake, etc!
There are 6 unused database options. They are:
Option left: name:-ksp_type value: preonly source: code
Option left: name:-mat_mumps_icntl_14 value: 120 source: code
Option left: name:-mat_mumps_icntl_28 value: 2 source: code
Option left: name:-mat_mumps_icntl_29 value: 2 source: code
Option left: name:-pc_factor_mat_solver_type value: mumps source: code
Option left: name:-pc_type value: lu source: code
SUCCESS difference: 0 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: SedimentWaterHead1
SUCCESS difference: 0 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: EplWaterHead1
SUCCESS difference: 0 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: SedimentHeadResidual1
SUCCESS difference: 0 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: SedimentWaterHead4
SUCCESS difference: 0 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: EplWaterHead4
SUCCESS difference: 0 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: SedimentHeadResidual4
SUCCESS difference: 0 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: SedimentWaterHead5
SUCCESS difference: 0 < 5e-12 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: EplWaterHead5
SUCCESS difference: 0 < 1e-11 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: SedimentHeadResidual5
SUCCESS difference: 1.1e-15 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: SedimentWaterHead9
SUCCESS difference: 0 < 5e-12 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: EplWaterHead9
SUCCESS difference: 0 < 1e-11 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: SedimentHeadResidual9
SUCCESS difference: 0 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: EplWaterHead20
SUCCESS difference: 0 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: EplWaterHeadSubstep20
SUCCESS difference: 2.8e-15 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: SedimentWaterHead20
SUCCESS difference: 3.4e-15 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: SedimentWaterHeadSubstep20
----------------finished:905-----------------------
----------------starting:906-----------------------
no hydrology.basal_moulin_input specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.067614
Total Core solution elapsed time: 24.1482
Linear solver elapsed time: 15.2496 (63%)
Total elapsed time: 0 hrs 0 min 24 sec
SUCCESS difference: 5.5e-16 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: SedimentWaterHead2
SUCCESS difference: 1.6e-14 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: EplWaterHead2
SUCCESS difference: 1.7e-14 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: SedimentHeadResidual2
SUCCESS difference: 8.6e-16 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: SedimentHeadSubstep2
SUCCESS difference: 1.8e-14 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: EplHeadSubstep2
SUCCESS difference: 0 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: HydrologySubsteps2
SUCCESS difference: 0 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: HydrologySubTime2
SUCCESS difference: 7.9e-16 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: SedimentWaterHead3
SUCCESS difference: 7.4e-15 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: EplWaterHead3
SUCCESS difference: 6.5e-15 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: SedimentHeadResidual3
----------------finished:906-----------------------
MATLABEXITEDCORRECTLY
-----------End of matlab_log.log-----------
Build step 'Execute shell' marked build as failure
Recording test results
Finished: FAILURE
