Solver residue is Na
Solver residue is Na
Solver residue is Na
N
N
N
job aborted:
[ranks] message
[0-2] process exited without calling finalize
---- error analysis -----
[0-2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test501.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test501 (line 7)
md=solve(md,'Stressbalance');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 501 test name: PigStressSSA2d field: N/A
----------------finished:501-----------------------
----------------starting:502-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
Error: Poor vertex distribution (processor with no vertices).
[
[
[
1
0
2
] ??? Error using ==>
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
p
:
:
:
72
72
72
[
[
[
1
0
2
]
]
]
checkconvergence
checkconvergence
checkconvergence
error message:
error message:
error message:
Solver residue is Na
Solver residue is Na
Solver residue is Na
N
N
N
job aborted:
[ranks] message
[0-2] process exited without calling finalize
---- error analysis -----
[0-2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test502.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test502 (line 8)
md=solve(md,'Stressbalance');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 502 test name: PigStressHO field: N/A
----------------finished:502-----------------------
----------------starting:503-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Error: Poor vertex distribution (processor with no vertices).
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
[
[
[
2
0
1
] ??? Error using ==>
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
p
:
:
:
72
72
72
[
[
[
2
0
1
]
]
]
checkconvergence
checkconvergence
checkconvergence
error message:
error message:
error message:
Solver residue is Na
Solver residue is Na
Solver residue is Na
N
N
N
job aborted:
[ranks] message
[0-2] process exited without calling finalize
---- error analysis -----
[0-2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test503.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test503 (line 8)
md=solve(md,'Stressbalance');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 503 test name: PigStressFS field: N/A
----------------finished:503-----------------------
----------------starting:504-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
Warning: expecting coordinates in polar stereographic (Std Latitude: 71S Meridian: 0)
launching solution sequence
Error: Poor vertex distribution (processor with no vertices).
[
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
[
[
1
2
0
] ??? Error using ==>
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
p
:
:
:
72
72
72
[
[
[
1
2
0
]
]
]
checkconvergence
checkconvergence
checkconvergence
error message:
error message:
error message:
Solver residue is Na
Solver residue is Na
Solver residue is Na
N
N
N
job aborted:
[ranks] message
[0-2] process exited without calling finalize
---- error analysis -----
[0-2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test504.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test504 (line 11)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 504 test name: PigTranSSA2d field: N/A
----------------finished:504-----------------------
----------------starting:505-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Error: Poor vertex distribution (processor with no vertices).
Error: Poor vertex distribution (processor with no vertices).
[
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
solver residue too high!: norm(KU-F)/norm(F)=inf > 1e-06 (md.settings.solver_residue_threshold)
WARNING: Solver failed, Trying Recovery Mode
Error: Poor vertex distribution (processor with no vertices).
solver residue too high!: norm(KU-F)/norm(F)=inf > 1e-06 (md.settings.solver_residue_threshold)
[
[
2
0
1
] ??? Error using ==>
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
p
:
:
:
41
41
41
[
[
[
2
0
1
]
]
]
Solver
Solver
Solver
x
x
x
error message:
error message:
error message:
Recovery solver failed..
Recovery solver failed..
Recovery solver failed..
.
.
.
job aborted:
[ranks] message
[0-2] process exited without calling finalize
---- error analysis -----
[0-2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test505.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test505 (line 8)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 505 test name: PigTranSSA3d field: N/A
----------------finished:505-----------------------
----------------starting:506-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.373324
Total Core solution elapsed time: 0.736355
Linear solver elapsed time: 0.355702 (48%)
Total elapsed time: 0 hrs 0 min 1 sec
SUCCESS difference: 6.2e-14 < 1e-10 test id: 506 test name: PigTranHO field: Vx1
SUCCESS difference: 3.1e-14 < 1e-10 test id: 506 test name: PigTranHO field: Vy1
SUCCESS difference: 3.3e-14 < 1e-10 test id: 506 test name: PigTranHO field: Vz1
SUCCESS difference: 2.2e-14 < 1e-10 test id: 506 test name: PigTranHO field: Vel1
SUCCESS difference: 1.1e-16 < 1e-12 test id: 506 test name: PigTranHO field: Pressure1
SUCCESS difference: 6.4e-16 < 1e-11 test id: 506 test name: PigTranHO field: Bed1
SUCCESS difference: 1.8e-15 < 2e-12 test id: 506 test name: PigTranHO field: Surface1
SUCCESS difference: 8.2e-16 < 1e-11 test id: 506 test name: PigTranHO field: Thickness1
SUCCESS difference: 8.3e-16 < 1e-12 test id: 506 test name: PigTranHO field: Temperature1
SUCCESS difference: 1.8e-16 < 1e-09 test id: 506 test name: PigTranHO field: BasalforcingsGroundediceMeltingRate1
SUCCESS difference: 1.8e-16 < 2e-13 test id: 506 test name: PigTranHO field: IceVolume1
SUCCESS difference: 2e-16 < 2e-13 test id: 506 test name: PigTranHO field: IceVolumeScaled1
SUCCESS difference: 0 < 1e-13 test id: 506 test name: PigTranHO field: GroundedArea1
SUCCESS difference: 2.2e-16 < 1e-13 test id: 506 test name: PigTranHO field: GroundedAreaScaled1
SUCCESS difference: 7.2e-15 < 1e-13 test id: 506 test name: PigTranHO field: FloatingArea1
SUCCESS difference: 7.4e-15 < 1e-13 test id: 506 test name: PigTranHO field: FloatingAreaScaled1
SUCCESS difference: 0 < 1e-13 test id: 506 test name: PigTranHO field: TotalSmb1
SUCCESS difference: 0 < 1e-13 test id: 506 test name: PigTranHO field: TotalSmbScaled1
SUCCESS difference: 0 < 1e-13 test id: 506 test name: PigTranHO field: TotalFloatingBmb1
SUCCESS difference: 0 < 1e-13 test id: 506 test name: PigTranHO field: TotalFloatingBmbScaled1
SUCCESS difference: 2.2e-14 < 2e-11 test id: 506 test name: PigTranHO field: Vx2
SUCCESS difference: 6.4e-14 < 2e-11 test id: 506 test name: PigTranHO field: Vy2
SUCCESS difference: 1.1e-13 < 1e-09 test id: 506 test name: PigTranHO field: Vz2
SUCCESS difference: 6.3e-14 < 1e-11 test id: 506 test name: PigTranHO field: Vel2
SUCCESS difference: 8.2e-16 < 1e-11 test id: 506 test name: PigTranHO field: Pressure2
SUCCESS difference: 1.1e-15 < 1e-10 test id: 506 test name: PigTranHO field: Bed2
SUCCESS difference: 2.9e-15 < 1e-11 test id: 506 test name: PigTranHO field: Surface2
SUCCESS difference: 1.3e-15 < 1e-10 test id: 506 test name: PigTranHO field: Thickness2
SUCCESS difference: 1.6e-15 < 1e-11 test id: 506 test name: PigTranHO field: Temperature2
SUCCESS difference: 0 < 2e-08 test id: 506 test name: PigTranHO field: BasalforcingsGroundediceMeltingRate2
SUCCESS difference: 1.8e-16 < 2e-13 test id: 506 test name: PigTranHO field: IceVolume2
SUCCESS difference: 2e-16 < 2e-13 test id: 506 test name: PigTranHO field: IceVolumeScaled2
SUCCESS difference: 0 < 1e-13 test id: 506 test name: PigTranHO field: GroundedArea2
SUCCESS difference: 2.2e-16 < 1e-13 test id: 506 test name: PigTranHO field: GroundedAreaScaled2
SUCCESS difference: 7.4e-15 < 1e-13 test id: 506 test name: PigTranHO field: FloatingArea2
SUCCESS difference: 7.6e-15 < 1e-13 test id: 506 test name: PigTranHO field: FloatingAreaScaled2
SUCCESS difference: 0 < 1e-13 test id: 506 test name: PigTranHO field: TotalSmb2
SUCCESS difference: 0 < 1e-13 test id: 506 test name: PigTranHO field: TotalSmbScaled2
SUCCESS difference: 0 < 1e-13 test id: 506 test name: PigTranHO field: TotalFloatingBmb2
SUCCESS difference: 0 < 1e-13 test id: 506 test name: PigTranHO field: TotalFloatingBmbScaled2
----------------finished:506-----------------------
----------------starting:507-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Error: Poor vertex distribution (processor with no vertices).
[
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
[
[
2
1
0
] ??? Error using ==>
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
p
:
:
:
72
72
72
[
[
[
2
1
0
]
]
]
checkconvergence
checkconvergence
checkconvergence
error message:
error message:
error message:
Solver residue is Na
Solver residue is Na
Solver residue is Na
N
N
N
job aborted:
[ranks] message
[0] terminated
[1-2] process exited without calling finalize
---- error analysis -----
[1-2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test507.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test507 (line 9)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 507 test name: PigTranFS field: N/A
----------------finished:507-----------------------
----------------starting:508-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
maximum number of iterations (100) exceeded
write lock file:
FemModel initialization elapsed time: 0.212555
Total Core solution elapsed time: 4.42989
Linear solver elapsed time: 1.64974 (37%)
Total elapsed time: 0 hrs 0 min 4 sec
WARNING! There are options you set that were not used!
WARNING! could be spelling mistake, etc!
There are 7 unused database options. They are:
Option left: name:-ksp_type value: preonly source: code
Option left: name:-mat_mumps_icntl_14 value: 120 source: code
Option left: name:-mat_mumps_icntl_28 value: 2 source: code
Option left: name:-mat_mumps_icntl_29 value: 2 source: code
Option left: name:-mat_type value: mpiaij source: code
Option left: name:-pc_factor_mat_solver_type value: mumps source: code
Option left: name:-pc_type value: lu source: code
SUCCESS difference: 1.2e-14 < 5e-08 test id: 508 test name: PigSteaSSA3d field: Vx
SUCCESS difference: 1.1e-14 < 3e-08 test id: 508 test name: PigSteaSSA3d field: Vy
SUCCESS difference: 2.4e-12 < 5e-08 test id: 508 test name: PigSteaSSA3d field: Vz
SUCCESS difference: 2.4e-12 < 5e-08 test id: 508 test name: PigSteaSSA3d field: Vel
SUCCESS difference: 1.1e-16 < 1e-09 test id: 508 test name: PigSteaSSA3d field: Pressure
SUCCESS difference: 5e-13 < 2e-07 test id: 508 test name: PigSteaSSA3d field: Temperature
SUCCESS difference: 0 < 8e-07 test id: 508 test name: PigSteaSSA3d field: BasalforcingsGroundediceMeltingRate
----------------finished:508-----------------------
----------------starting:509-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
[
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
[
Error: Poor vertex distribution (processor with no vertices).
[
2
0
1
] ??? Error using ==>
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
p
:
:
:
72
72
72
[
[
[
2
0
1
]
]
]
checkconvergence
checkconvergence
checkconvergence
error message:
error message:
error message:
Solver residue is Na
Solver residue is Na
Solver residue is Na
N
N
N
job aborted:
[ranks] message
[0-2] process exited without calling finalize
---- error analysis -----
[0-2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test509.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test509 (line 10)
md=solve(md,'Steadystate');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 509 test name: PigSteaHO field: N/A
----------------finished:509-----------------------
----------------starting:510-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
[
Error: Poor vertex distribution (processor with no vertices).
[
[
2
1
0
] ??? Error using ==>
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
p
:
:
:
72
72
72
[
[
[
2
1
0
]
]
]
checkconvergence
checkconvergence
checkconvergence
error message:
error message:
error message:
Solver residue is Na
Solver residue is Na
Solver residue is Na
N
N
N
job aborted:
[ranks] message
[0-2] process exited without calling finalize
---- error analysis -----
[0-2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test510.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test510 (line 9)
md=solve(md,'Steadystate');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 510 test name: PigSteaFS field: N/A
----------------finished:510-----------------------
----------------starting:511-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
NOTE: using observed velocities to create constraints along new boundary
INFO: the outlog will look better if only md.verbose.control is turned on
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
x | Cost function f(x) | List of contributions
====================== step 1/2 ===============================
x = 0 | f(x) = 0.0537942 | 0.0537942
x = 1 | f(x) = 0.04886803 | 0.04886803
====================== step 2/2 ===============================
x = 0 | f(x) = 0.04875168 | 0.04875168
x = 1 | f(x) = 0.05273747 | 0.05273747
x = 0.381966 | f(x) = 0.04920111 | 0.04920111
x = 0.618034 | f(x) = 0.05036058 | 0.05036058
write lock file:
FemModel initialization elapsed time: 0.122168
Total Core solution elapsed time: 0.313742
Linear solver elapsed time: 0.0290296 (9.3%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 9.3e-14 < 5e-11 test id: 511 test name: PigCMBFS field: Gradient
SUCCESS difference: 3.9e-13 < 5e-11 test id: 511 test name: PigCMBFS field: Misfits
SUCCESS difference: 2.3e-13 < 5e-11 test id: 511 test name: PigCMBFS field: MaterialsRheologyB
SUCCESS difference: 1.1e-10 < 1e-09 test id: 511 test name: PigCMBFS field: Pressure
SUCCESS difference: 2e-13 < 1e-11 test id: 511 test name: PigCMBFS field: Vel
SUCCESS difference: 1.5e-13 < 5e-11 test id: 511 test name: PigCMBFS field: Vx
SUCCESS difference: 1.1e-13 < 1e-11 test id: 511 test name: PigCMBFS field: Vy
----------------finished:511-----------------------
----------------starting:512-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
INFO: the outlog will look better if only md.verbose.control is turned on
launching solution sequence
Error: Poor vertex distribution (processor with no vertices).
[
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
x | Cost function f(x) | List of contributions
====================== step 1/2 ===============================
x = 0 | Error: Poor vertex distribution (processor with no vertices).
[
[
2
1
0
] ??? Error using ==>
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
p
:
:
:
72
72
72
[
[
[
2
1
0
]
]
]
checkconvergence
checkconvergence
checkconvergence
error message:
error message:
error message:
Solver residue is Na
Solver residue is Na
Solver residue is Na
N
N
N
job aborted:
[ranks] message
[0-2] process exited without calling finalize
---- error analysis -----
[0-2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test512.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test512 (line 22)
md=solve(md,'Stressbalance');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 512 test name: PigCMDragHO field: N/A
----------------finished:512-----------------------
----------------starting:513-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
INFO: the outlog will look better if only md.verbose.control is turned on
launching solution sequence
[
Error: Poor vertex distribution (processor with no vertices).
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
x | Cost function f(x) | List of contributions
====================== step 1/2 ===============================
x = 0 | Error: Poor vertex distribution (processor with no vertices).
[
[
2
1
0
] ??? Error using ==>
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
p
:
:
:
72
72
72
[
[
[
2
1
0
]
]
]
checkconvergence
checkconvergence
checkconvergence
error message:
error message:
error message:
Solver residue is Na
Solver residue is Na
Solver residue is Na
N
N
N
job aborted:
[ranks] message
[0-2] process exited without calling finalize
---- error analysis -----
[0-2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test513.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test513 (line 24)
md=solve(md,'Steadystate');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 513 test name: PigCMDragSteaSSA3d field: N/A
----------------finished:513-----------------------
----------------starting:514-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
SUCCESS difference: 0 < 2e-10 test id: 514 test name: PigBamgMesh field: x1
SUCCESS difference: 0 < 7e-10 test id: 514 test name: PigBamgMesh field: y1
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: x2
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: y2
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: x3
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: y3
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: x4
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: y4
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: x5
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: y5
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: x6
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: y6
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: x7
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: y7
----------------finished:514-----------------------
----------------starting:515-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
[
Error: Poor vertex distribution (processor with no vertices).
Error: Poor vertex distribution (processor with no vertices).
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
solver residue too high!: norm(KU-F)/norm(F)=inf > 1e-06 (md.settings.solver_residue_threshold)
WARNING: Solver failed, Trying Recovery Mode
Error: Poor vertex distribution (processor with no vertices).
solver residue too high!: norm(KU-F)/norm(F)=inf > 1e-06 (md.settings.solver_residue_threshold)
[
[
2
1
0
] ??? Error using ==>
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
p
:
:
:
41
41
41
[
[
[
2
1
0
]
]
]
Solver
Solver
Solver
x
x
x
error message:
error message:
error message:
Recovery solver failed..
Recovery solver failed..
Recovery solver failed..
.
.
.
job aborted:
[ranks] message
[0-2] process exited without calling finalize
---- error analysis -----
[0-2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test515.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test515 (line 14)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 515 test name: PigTherTranSUPG field: N/A
----------------finished:515-----------------------
----------------starting:516-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
[
[
Error: Poor vertex distribution (processor with no vertices).
[
2
0
1
] ??? Error using ==>
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
p
:
:
:
72
72
72
[
[
[
2
0
1
]
]
]
checkconvergence
checkconvergence
checkconvergence
error message:
error message:
error message:
Solver residue is Na
Solver residue is Na
Solver residue is Na
N
N
N
job aborted:
[ranks] message
[0-2] process exited without calling finalize
---- error analysis -----
[0-2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test516.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test516 (line 11)
md=solve(md,'Thermal');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 516 test name: PigTherSteaSUPG field: N/A
----------------finished:516-----------------------
----------------starting:517-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
NOTE: using observed velocities to create constraints along new boundary
INFO: the outlog will look better if only md.verbose.control is turned on
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Iter Cost function Grad. norm List of contributions
1 f(x)= 0.054509 1.32e-07 0.05451 6.124e-15
2 f(x)=7.0726e+11 1.78e+06 0.05377 7.073e+11
3 f(x)=7.0726e+07 1.78e+04 0.05376 7.073e+07
4 f(x)=1.7681e+05 892 0.05376 1.768e+05
5 f(x)= 11051 223 0.05376 1.105e+04
6 f(x)= 994.64 66.9 0.05376 994.6
7 f(x)= 89.566 20.1 0.05376 89.51
8 f(x)= 8.1099 6.02 0.05376 8.056
9 f(x)= 0.77881 1.81 0.05376 0.7251
10 f(x)= 0.11901 0.542 0.05376 0.06525
11 f(x)= 0.059631 0.163 0.05376 0.005873
stopped on dxmin during line search
write lock file:
FemModel initialization elapsed time: 0.11956
Total Core solution elapsed time: 1.10997
Linear solver elapsed time: 0.0926603 (8.3%)
Total elapsed time: 0 hrs 0 min 1 sec
SUCCESS difference: 0 < 6e-11 test id: 517 test name: PigCMBFSm1qn3 field: Gradient
SUCCESS difference: 4.1e-14 < 5e-11 test id: 517 test name: PigCMBFSm1qn3 field: Misfits
SUCCESS difference: 2.5e-10 < 5e-10 test id: 517 test name: PigCMBFSm1qn3 field: MaterialsRheologyB
SUCCESS difference: 1.1e-11 < 1e-09 test id: 517 test name: PigCMBFSm1qn3 field: Pressure
SUCCESS difference: 7.6e-12 < 2e-11 test id: 517 test name: PigCMBFSm1qn3 field: Vel
SUCCESS difference: 2.6e-11 < 5e-11 test id: 517 test name: PigCMBFSm1qn3 field: Vx
SUCCESS difference: 7e-12 < 2e-11 test id: 517 test name: PigCMBFSm1qn3 field: Vy
----------------finished:517-----------------------
----------------starting:518-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Error: Poor vertex distribution (processor with no vertices).
[
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
[
[
2
1
0
] ??? Error using ==>
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
p
:
:
:
72
72
72
[
[
[
2
1
0
]
]
]
checkconvergence
checkconvergence
checkconvergence
error message:
error message:
error message:
Solver residue is Na
Solver residue is Na
Solver residue is Na
N
N
N
job aborted:
[ranks] message
[0] terminated
[1-2] process exited without calling finalize
---- error analysis -----
[1-2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test518.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test518 (line 9)
md=solve(md,'Stressbalance');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 518 test name: PigStressMOLHO2d field: N/A
----------------finished:518-----------------------
----------------starting:519-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
Warning: expecting coordinates in polar stereographic (Std Latitude: 71S Meridian: 0)
launching solution sequence
Error: Poor vertex distribution (processor with no vertices).
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
[
[
[
2
1
0
] ??? Error using ==>
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
p
:
:
:
72
72
72
[
[
[
2
1
0
]
]
]
checkconvergence
checkconvergence
checkconvergence
error message:
error message:
error message:
Solver residue is Na
Solver residue is Na
Solver residue is Na
N
N
N
job aborted:
[ranks] message
[0-2] process exited without calling finalize
---- error analysis -----
[0-2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test519.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test519 (line 12)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 519 test name: PigTranMOLHO2d field: N/A
----------------finished:519-----------------------
----------------starting:520-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
Warning: expecting coordinates in polar stereographic (Std Latitude: 71S Meridian: 0)
launching solution sequence
[
Error: Poor vertex distribution (processor with no vertices).
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
[
[
2
0
1
] ??? Error using ==>
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
p
:
:
:
72
72
72
[
[
[
2
0
1
]
]
]
checkconvergence
checkconvergence
checkconvergence
error message:
error message:
error message:
Solver residue is Na
Solver residue is Na
Solver residue is Na
N
N
N
job aborted:
[ranks] message
[0-2] process exited without calling finalize
---- error analysis -----
[0-2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test520.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test520 (line 17)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 520 test name: PigTran-IntrusionMelt field: N/A
----------------finished:520-----------------------
----------------starting:521-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
checking model consistency
INFO: the outlog will look better if only md.verbose.control is turned on
marshalling file C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\execution/test521-07-18-2026-16-34-33-4140/test521.bin
launching solution sequence
[
Error: Poor vertex distribution (processor with no vertices).
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
call computational core:
=== NUDGING STEP 1/3 === SIZE = 70308
iteration 1/2 time [yr]: 0.50 (time step: 0.50)
computing smb
computing new velocity
Error: Poor vertex distribution (processor with no vertices).
[
[
2
0
1
] ??? Error using ==>
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
p
:
:
:
72
72
72
[
[
[
2
0
1
]
]
]
checkconvergence
checkconvergence
checkconvergence
error message:
error message:
error message:
Solver residue is Na
Solver residue is Na
Solver residue is Na
N
N
N
job aborted:
[ranks] message
[0-1] terminated
[2] process exited without calling finalize
---- error analysis -----
[2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
loading results from cluster
Error using loadresultsfromdisk
=========================================================================
Binary file test521.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test521 (line 31)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 521 test name: PigNudgingSSA2d field: N/A
----------------finished:521-----------------------
----------------starting:530-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.0660017
Total Core solution elapsed time: 0.0322868
Linear solver elapsed time: 0.0097809 (30%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 2.1e-16 < 1e-13 test id: 530 test name: PigBalVel1 field: DrivingStressX
SUCCESS difference: 7.7e-16 < 1e-13 test id: 530 test name: PigBalVel1 field: DrivingStressX
SUCCESS difference: 0 < 1e-13 test id: 530 test name: PigBalVel1 field: Vel
----------------finished:530-----------------------
----------------starting:531-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.155066
Total Core solution elapsed time: 0.0638948
Linear solver elapsed time: 0.0099998 (16%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 3.2e-16 < 1e-13 test id: 531 test name: PigBalVel2 field: DrivingStressX
SUCCESS difference: 5e-16 < 1e-13 test id: 531 test name: PigBalVel2 field: DrivingStressX
SUCCESS difference: 0 < 1e-13 test id: 531 test name: PigBalVel2 field: Vel
----------------finished:531-----------------------
----------------starting:540-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.115446
Total Core solution elapsed time: 2.6486
Linear solver elapsed time: 0.808965 (31%)
Total elapsed time: 0 hrs 0 min 2 sec
SUCCESS difference: 3.9e-15 < 1e-12 test id: 540 test name: PigTranCalvingDevSSA2d field: Vx1
SUCCESS difference: 9.3e-15 < 2e-12 test id: 540 test name: PigTranCalvingDevSSA2d field: Vy1
SUCCESS difference: 8.6e-15 < 2e-12 test id: 540 test name: PigTranCalvingDevSSA2d field: Vel1
SUCCESS difference: 0 < 1e-13 test id: 540 test name: PigTranCalvingDevSSA2d field: Pressure1
SUCCESS difference: 6e-16 < 1e-13 test id: 540 test name: PigTranCalvingDevSSA2d field: Bed1
SUCCESS difference: 1.3e-15 < 1e-13 test id: 540 test name: PigTranCalvingDevSSA2d field: Surface1
SUCCESS difference: 5.4e-16 < 1e-13 test id: 540 test name: PigTranCalvingDevSSA2d field: Thickness1
SUCCESS difference: 5.3e-15 < 2e-12 test id: 540 test name: PigTranCalvingDevSSA2d field: MaskIceLevelset1
SUCCESS difference: 1.9e-16 < 1e-12 test id: 540 test name: PigTranCalvingDevSSA2d field: IceVolume1
SUCCESS difference: 1.1e-16 < 2e-12 test id: 540 test name: PigTranCalvingDevSSA2d field: IceVolumeAboveFloatation1
SUCCESS difference: 0 < 2e-12 test id: 540 test name: PigTranCalvingDevSSA2d field: TotalSmb1
SUCCESS difference: 0 < 1e-13 test id: 540 test name: PigTranCalvingDevSSA2d field: TotalGroundedBmb1
SUCCESS difference: 0 < 1e-13 test id: 540 test name: PigTranCalvingDevSSA2d field: TotalFloatingBmb1
SUCCESS difference: 6.2e-15 < 1e-12 test id: 540 test name: PigTranCalvingDevSSA2d field: Vx2
SUCCESS difference: 5.3e-15 < 2e-12 test id: 540 test name: PigTranCalvingDevSSA2d field: Vy2
SUCCESS difference: 5.9e-15 < 2e-12 test id: 540 test name: PigTranCalvingDevSSA2d field: Vel2
SUCCESS difference: 4e-16 < 1e-13 test id: 540 test name: PigTranCalvingDevSSA2d field: Pressure2
SUCCESS difference: 6.9e-16 < 2e-13 test id: 540 test name: PigTranCalvingDevSSA2d field: Bed2
SUCCESS difference: 2.2e-15 < 1e-13 test id: 540 test name: PigTranCalvingDevSSA2d field: Surface2
SUCCESS difference: 1.1e-15 < 1e-13 test id: 540 test name: PigTranCalvingDevSSA2d field: Thickness2
SUCCESS difference: 7.3e-15 < 2e-12 test id: 540 test name: PigTranCalvingDevSSA2d field: MaskIceLevelset2
SUCCESS difference: 1.9e-16 < 1e-12 test id: 540 test name: PigTranCalvingDevSSA2d field: IceVolume2
SUCCESS difference: 0 < 2e-12 test id: 540 test name: PigTranCalvingDevSSA2d field: IceVolumeAboveFloatation2
SUCCESS difference: 0 < 2e-12 test id: 540 test name: PigTranCalvingDevSSA2d field: TotalSmb2
SUCCESS difference: 0 < 1e-13 test id: 540 test name: PigTranCalvingDevSSA2d field: TotalGroundedBmb2
SUCCESS difference: 0 < 1e-13 test id: 540 test name: PigTranCalvingDevSSA2d field: TotalFloatingBmb2
SUCCESS difference: 5.1e-15 < 1e-11 test id: 540 test name: PigTranCalvingDevSSA2d field: Vx10
SUCCESS difference: 3.3e-15 < 1e-11 test id: 540 test name: PigTranCalvingDevSSA2d field: Vy10
SUCCESS difference: 4.3e-15 < 1e-11 test id: 540 test name: PigTranCalvingDevSSA2d field: Vel10
SUCCESS difference: 1.5e-15 < 1e-11 test id: 540 test name: PigTranCalvingDevSSA2d field: Pressure10
SUCCESS difference: 8.6e-16 < 1e-11 test id: 540 test name: PigTranCalvingDevSSA2d field: Bed10
SUCCESS difference: 3.1e-15 < 1e-11 test id: 540 test name: PigTranCalvingDevSSA2d field: Surface10
SUCCESS difference: 1.5e-15 < 1e-11 test id: 540 test name: PigTranCalvingDevSSA2d field: Thickness10
SUCCESS difference: 1.5e-15 < 1e-09 test id: 540 test name: PigTranCalvingDevSSA2d field: MaskIceLevelset10
SUCCESS difference: 3.7e-16 < 1e-12 test id: 540 test name: PigTranCalvingDevSSA2d field: IceVolume10
SUCCESS difference: 2.2e-16 < 2e-12 test id: 540 test name: PigTranCalvingDevSSA2d field: IceVolumeAboveFloatation10
SUCCESS difference: 0 < 2e-12 test id: 540 test name: PigTranCalvingDevSSA2d field: TotalSmb10
SUCCESS difference: 0 < 1e-13 test id: 540 test name: PigTranCalvingDevSSA2d field: TotalGroundedBmb10
SUCCESS difference: 0 < 1e-13 test id: 540 test name: PigTranCalvingDevSSA2d field: TotalFloatingBmb10
----------------finished:540-----------------------
----------------starting:541-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.506611
Total Core solution elapsed time: 28.1994
Linear solver elapsed time: 4.02171 (14%)
Total elapsed time: 0 hrs 0 min 28 sec
SUCCESS difference: 3.1e-13 < 1e-11 test id: 541 test name: PigTranCalvingDevHO3d field: Vx1
SUCCESS difference: 2.2e-13 < 2e-11 test id: 541 test name: PigTranCalvingDevHO3d field: Vy1
SUCCESS difference: 1.9e-13 < 2e-11 test id: 541 test name: PigTranCalvingDevHO3d field: Vel1
SUCCESS difference: 0 < 1e-12 test id: 541 test name: PigTranCalvingDevHO3d field: Pressure1
SUCCESS difference: 1.5e-14 < 2e-11 test id: 541 test name: PigTranCalvingDevHO3d field: Bed1
SUCCESS difference: 2.5e-14 < 6e-12 test id: 541 test name: PigTranCalvingDevHO3d field: Surface1
SUCCESS difference: 1.1e-14 < 9e-12 test id: 541 test name: PigTranCalvingDevHO3d field: Thickness1
SUCCESS difference: 1e-13 < 2e-12 test id: 541 test name: PigTranCalvingDevHO3d field: MaskIceLevelset1
SUCCESS difference: 1.9e-16 < 1e-11 test id: 541 test name: PigTranCalvingDevHO3d field: IceVolume1
SUCCESS difference: 3.4e-16 < 2e-11 test id: 541 test name: PigTranCalvingDevHO3d field: IceVolumeAboveFloatation1
SUCCESS difference: 0 < 2e-11 test id: 541 test name: PigTranCalvingDevHO3d field: TotalSmb1
SUCCESS difference: 0 < 3e-09 test id: 541 test name: PigTranCalvingDevHO3d field: TotalGroundedBmb1
SUCCESS difference: 0 < 2e-11 test id: 541 test name: PigTranCalvingDevHO3d field: TotalFloatingBmb1
SUCCESS difference: 3.3e-13 < 2e-11 test id: 541 test name: PigTranCalvingDevHO3d field: Vx2
SUCCESS difference: 6.8e-13 < 1e-11 test id: 541 test name: PigTranCalvingDevHO3d field: Vy2
SUCCESS difference: 6.3e-13 < 1e-11 test id: 541 test name: PigTranCalvingDevHO3d field: Vel2
SUCCESS difference: 1.1e-14 < 9e-12 test id: 541 test name: PigTranCalvingDevHO3d field: Pressure2
SUCCESS difference: 5.3e-12 < 3e-11 test id: 541 test name: PigTranCalvingDevHO3d field: Bed2
SUCCESS difference: 1.5e-12 < 3e-11 test id: 541 test name: PigTranCalvingDevHO3d field: Surface2
SUCCESS difference: 3.6e-12 < 2e-11 test id: 541 test name: PigTranCalvingDevHO3d field: Thickness2
SUCCESS difference: 4.8e-13 < 1e-11 test id: 541 test name: PigTranCalvingDevHO3d field: MaskIceLevelset2
SUCCESS difference: 4.3e-14 < 1e-11 test id: 541 test name: PigTranCalvingDevHO3d field: IceVolume2
SUCCESS difference: 2.5e-15 < 2e-11 test id: 541 test name: PigTranCalvingDevHO3d field: IceVolumeAboveFloatation2
SUCCESS difference: 0 < 2e-11 test id: 541 test name: PigTranCalvingDevHO3d field: TotalSmb2
SUCCESS difference: 1.9e-09 < 8e-08 test id: 541 test name: PigTranCalvingDevHO3d field: TotalGroundedBmb2
SUCCESS difference: 0 < 2e-11 test id: 541 test name: PigTranCalvingDevHO3d field: TotalFloatingBmb2
SUCCESS difference: 9e-11 < 3e-10 test id: 541 test name: PigTranCalvingDevHO3d field: Vx10
SUCCESS difference: 2.8e-11 < 1e-10 test id: 541 test name: PigTranCalvingDevHO3d field: Vy10
SUCCESS difference: 1.7e-11 < 1e-10 test id: 541 test name: PigTranCalvingDevHO3d field: Vel10
SUCCESS difference: 5.9e-12 < 1e-10 test id: 541 test name: PigTranCalvingDevHO3d field: Pressure10
SUCCESS difference: 8.9e-12 < 1e-10 test id: 541 test name: PigTranCalvingDevHO3d field: Bed10
SUCCESS difference: 9.6e-12 < 1e-10 test id: 541 test name: PigTranCalvingDevHO3d field: Surface10
SUCCESS difference: 5.4e-12 < 1e-10 test id: 541 test name: PigTranCalvingDevHO3d field: Thickness10
SUCCESS difference: 5.3e-13 < 1e-09 test id: 541 test name: PigTranCalvingDevHO3d field: MaskIceLevelset10
SUCCESS difference: 1.7e-13 < 1e-11 test id: 541 test name: PigTranCalvingDevHO3d field: IceVolume10
SUCCESS difference: 1.3e-13 < 2e-11 test id: 541 test name: PigTranCalvingDevHO3d field: IceVolumeAboveFloatation10
SUCCESS difference: 0 < 2e-11 test id: 541 test name: PigTranCalvingDevHO3d field: TotalSmb10
SUCCESS difference: 1.8e-08 < 8e-08 test id: 541 test name: PigTranCalvingDevHO3d field: TotalGroundedBmb10
SUCCESS difference: 0 < 2e-11 test id: 541 test name: PigTranCalvingDevHO3d field: TotalFloatingBmb10
----------------finished:541-----------------------
----------------starting:542-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Error: Poor vertex distribution (processor with no vertices).
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
[
[
1
0
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
:
:
72
72
[
[
1
0
]
]
checkconvergence
checkconvergence
error message:
error message:
Solver residue is Na
Solver residue is Na
N
N
job aborted:
[ranks] message
[0-1] process exited without calling finalize
---- error analysis -----
[0-1] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test542.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test542 (line 43)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 542 test name: PigTranFrontalforcingsrignot field: N/A
----------------finished:542-----------------------
----------------starting:543-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
stochasticforcing.stocahstictimestep not specified: set to md.timestepping.time_step
launching solution sequence
Error: Poor vertex distribution (processor with no vertices).
[
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
1
[
] ??? Error using ==>
0
./modules/Solverx/Solverx.cp
] ??? Error using ==>
p
./modules/Solverx/Solverx.cp
:
p
72
:
[
72
1
[
]
0
checkconvergence
]
error message:
checkconvergence
Solver residue is Na
error message:
N
Solver residue is Na
N
job aborted:
[ranks] message
[0-1] process exited without calling finalize
---- error analysis -----
[0-1] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test543.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test543 (line 123)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 543 test name: PigTranRignotarma field: N/A
----------------finished:543-----------------------
----------------starting:544-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
smb.lapserates not specified: set to 0
stochasticforcing.stocahstictimestep not specified: set to md.timestepping.time_step
launching solution sequence
Error: Poor vertex distribution (processor with no vertices).
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
[
[
0
1
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
:
:
72
72
[
[
0
1
]
]
checkconvergence
checkconvergence
error message:
error message:
Solver residue is Na
Solver residue is Na
N
N
job aborted:
[ranks] message
[0-1] process exited without calling finalize
---- error analysis -----
[0-1] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test544.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test544 (line 99)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 544 test name: PigTranARMAandStochasticforcings field: N/A
----------------finished:544-----------------------
----------------starting:545-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
stochasticforcing.stocahstictimestep not specified: set to md.timestepping.time_step
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
[
Error: Poor vertex distribution (processor with no vertices).
[
0
1
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
:
:
72
72
[
[
0
1
]
]
checkconvergence
checkconvergence
error message:
error message:
Solver residue is Na
Solver residue is Na
N
N
job aborted:
[ranks] message
[0-1] process exited without calling finalize
---- error analysis -----
[0-1] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test545.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test545 (line 89)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 545 test name: PigTranStochasticforcingCovariance field: N/A
----------------finished:545-----------------------
----------------starting:546-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
smb.lapserates not specified: set to 0
stochasticforcing.stocahstictimestep not specified: set to md.timestepping.time_step
WARNING: md.timestepping.interp_forcing is 1, but be aware that there is no interpolation between covariance matrices
the changes between covariance matrices occur at the time steps specified in md.stochasticforcing.timecovariance
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
[
Error: Poor vertex distribution (processor with no vertices).
[
0
1
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
:
:
72
72
[
[
0
1
]
]
checkconvergence
checkconvergence
error message:
error message:
Solver residue is Na
Solver residue is Na
N
N
job aborted:
[ranks] message
[0-1] process exited without calling finalize
---- error analysis -----
[0-1] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test546.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test546 (line 109)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 546 test name: PigTranMultcovStochasticforcings field: N/A
----------------finished:546-----------------------
----------------starting:550-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Error: Poor vertex distribution (processor with no vertices).
[1] ??? Error using ==> ./classes/Elements/Tria.cpp:4330
[1] InputUpdateFromSolutionOneDof error message: Inf found in solution vector, SID = 12816
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
[0] ??? Error using ==> ./classes/Elements/Tria.cpp:4330
[0] InputUpdateFromSolutionOneDof error message: Inf found in solution vector, SID = 18747
Error: Poor vertex distribution (processor with no vertices).
Error: Poor vertex distribution (processor with no vertices).
[
[
Error: Poor vertex distribution (processor with no vertices).
[
3
4
7
] ??? Error using ==>
] ??? Error using ==>
] ??? Error using ==>
./classes/Elements/Tria.cp
./classes/Elements/Tria.cp
./classes/Elements/Tria.cp
p
p
p
:
:
:
4330
4330
Error: Poor vertex distribution (processor with no vertices).
[
4330
[
[
2
Error: Poor vertex distribution (processor with no vertices).
[
[
3
4
] ??? Error using ==>
5
7
]
]
./classes/Elements/Tria.cp
] ??? Error using ==>
]
InputUpdateFromSolutionOneDo
InputUpdateFromSolutionOneDo
p
./classes/Elements/Tria.cp
InputUpdateFromSolutionOneDo
f
f
:
p
f
error message:
error message:
4330
:
error message:
Inf found in solution vector, SID = 2597
Inf found in solution vector, SID = 4227
[
Inf found in solution vector, SID =
4330
2
0
[
]
5
InputUpdateFromSolutionOneDo
]
f
InputUpdateFromSolutionOneDo
error message:
f
Inf found in solution vector, SID = 62
error message:
4
Inf found in solution vector, SID = 2788
Error: Poor vertex distribution (processor with no vertices).
[6] ??? Error using ==> ./classes/Elements/Tria.cpp:4330
[6] InputUpdateFromSolutionOneDof error message: Inf found in solution vector, SID = 1584
job aborted:
[ranks] message
[0] process exited without calling finalize
[1] terminated
[2-5] process exited without calling finalize
[6] terminated
[7] process exited without calling finalize
---- error analysis -----
[0,2-5,7] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test550.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test550 (line 51)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 550 test name: PigShakti field: N/A
----------------finished:550-----------------------
----------------starting:601-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.6395
Total Core solution elapsed time: 0.0532498
Linear solver elapsed time: 0.0105016 (20%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 9e-16 < 1e-13 test id: 601 test name: 79NorthMasstransp2d field: Thickness
----------------finished:601-----------------------
----------------starting:602-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
[
Error: Poor vertex distribution (processor with no vertices).
[
[
2
0
1
] ??? Error using ==>
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
:
p
72
:
:
[
72
72
2
[
[
]
0
1
checkconvergence
]
]
error message:
checkconvergence
checkconvergence
Solver residue is Na
error message:
error message:
N
Solver residue is Na
Solver residue is Na
N
N
job aborted:
[ranks] message
[0-2] process exited without calling finalize
---- error analysis -----
[0-2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test602.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test602 (line 10)
md=solve(md,'Masstransport');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 602 test name: 79NorthMasstransp2dDG field: N/A
----------------finished:602-----------------------
----------------starting:603-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.0652386
Total Core solution elapsed time: 0.0102693
Linear solver elapsed time: 0.0043601 (42%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 1e-15 < 1e-13 test id: 603 test name: 79NorthMasstransp3d field: Thickness
----------------finished:603-----------------------
----------------starting:604-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Error: Poor vertex distribution (processor with no vertices).
Error: Poor vertex distribution (processor with no vertices).
[
[
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
solver residue too high!: norm(KU-F)/norm(F)=inf > 1e-06 (md.settings.solver_residue_threshold)
WARNING: Solver failed, Trying Recovery Mode
Error: Poor vertex distribution (processor with no vertices).
solver residue too high!: norm(KU-F)/norm(F)=inf > 1e-06 (md.settings.solver_residue_threshold)
[
2
1
0
] ??? Error using ==>
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
p
:
:
:
41
41
41
[
[
[
2
1
0
]
]
]
Solver
Solver
Solver
x
x
x
error message:
error message:
error message:
Recovery solver failed..
Recovery solver failed..
Recovery solver failed..
.
.
.
job aborted:
[ranks] message
[0-2] process exited without calling finalize
---- error analysis -----
[0-2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test604.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test604 (line 7)
md=solve(md,'SurfaceSlope');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 604 test name: 79NorthSurfSlop2d field: N/A
----------------finished:604-----------------------
----------------starting:605-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Error: Poor vertex distribution (processor with no vertices).
Error: Poor vertex distribution (processor with no vertices).
[
[
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
solver residue too high!: norm(KU-F)/norm(F)=inf > 1e-06 (md.settings.solver_residue_threshold)
WARNING: Solver failed, Trying Recovery Mode
Error: Poor vertex distribution (processor with no vertices).
solver residue too high!: norm(KU-F)/norm(F)=inf > 1e-06 (md.settings.solver_residue_threshold)
[
2
1
0
] ??? Error using ==>
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
p
:
:
:
41
41
41
[
[
[
2
1
0
]
]
]
Solver
Solver
Solver
x
x
x
error message:
error message:
error message:
Recovery solver failed..
Recovery solver failed..
Recovery solver failed..
.
.
.
job aborted:
[ranks] message
[0-2] process exited without calling finalize
---- error analysis -----
[0-2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test605.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test605 (line 8)
md=solve(md,'SurfaceSlope');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 605 test name: 79NorthSurfSlop3d field: N/A
----------------finished:605-----------------------
----------------starting:606-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Error: Poor vertex distribution (processor with no vertices).
Error: Poor vertex distribution (processor with no vertices).
[
[
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
solver residue too high!: norm(KU-F)/norm(F)=inf > 1e-06 (md.settings.solver_residue_threshold)
WARNING: Solver failed, Trying Recovery Mode
Error: Poor vertex distribution (processor with no vertices).
solver residue too high!: norm(KU-F)/norm(F)=inf > 1e-06 (md.settings.solver_residue_threshold)
[
2
1
0
] ??? Error using ==>
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
p
:
:
:
41
41
41
[
[
[
2
1
0
]
]
]
Solver
Solver
Solver
x
x
x
error message:
error message:
error message:
Recovery solver failed..
Recovery solver failed..
Recovery solver failed..
.
.
.
job aborted:
[ranks] message
[0-2] process exited without calling finalize
---- error analysis -----
[0-2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test606.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test606 (line 7)
md=solve(md,'BedSlope');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 606 test name: 79NorthBedSlop2d field: N/A
----------------finished:606-----------------------
----------------starting:607-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
[
Error: Poor vertex distribution (processor with no vertices).
Error: Poor vertex distribution (processor with no vertices).
[
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
solver residue too high!: norm(KU-F)/norm(F)=inf > 1e-06 (md.settings.solver_residue_threshold)
WARNING: Solver failed, Trying Recovery Mode
Error: Poor vertex distribution (processor with no vertices).
solver residue too high!: norm(KU-F)/norm(F)=inf > 1e-06 (md.settings.solver_residue_threshold)
[
2
1
0
] ??? Error using ==>
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
p
:
:
:
41
41
41
[
[
[
2
1
0
]
]
]
Solver
Solver
Solver
x
x
x
error message:
error message:
error message:
Recovery solver failed..
Recovery solver failed..
Recovery solver failed..
.
.
.
job aborted:
[ranks] message
[0-2] process exited without calling finalize
---- error analysis -----
[0-2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test607.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test607 (line 8)
md=solve(md,'BedSlope');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 607 test name: 79NorthBedSlop3d field: N/A
----------------finished:607-----------------------
----------------starting:608-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.0793163
Total Core solution elapsed time: 0.238306
Linear solver elapsed time: 0.0521146 (22%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 5.2e-16 < 1e-12 test id: 608 test name: 79NorthBalThic2d field: Thickness
----------------finished:608-----------------------
----------------starting:610-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.056185
Total Core solution elapsed time: 0.0195123
Linear solver elapsed time: 0 (0%)
Total elapsed time: 0 hrs 0 min 0 sec
WARNING! There are options you set that were not used!
WARNING! could be spelling mistake, etc!
There are 7 unused database options. They are:
Option left: name:-ksp_type value: preonly source: code
Option left: name:-mat_mumps_icntl_14 value: 120 source: code
Option left: name:-mat_mumps_icntl_28 value: 2 source: code
Option left: name:-mat_mumps_icntl_29 value: 2 source: code
Option left: name:-mat_type value: mpiaij source: code
Option left: name:-pc_factor_mat_solver_type value: mumps source: code
Option left: name:-pc_type value: lu source: code
SUCCESS difference: 0 < 1e-12 test id: 610 test name: 79NorthPISMhydro field: WaterColumn1
SUCCESS difference: 0 < 1e-12 test id: 610 test name: 79NorthPISMhydro field: WaterColumn2
SUCCESS difference: 0 < 1e-12 test id: 610 test name: 79NorthPISMhydro field: WaterColumn3
----------------finished:610-----------------------
----------------starting:611-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
INFO: the outlog will look better if only md.verbose.control is turned on
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
x | Cost function f(x) | List of contributions
====================== step 1/2 ===============================
x = 0 | f(x) = 5.576527e+15 | 5.576527e+15
x = 1 | f(x) = 2.800818e+15 | 2.800818e+15
====================== step 2/2 ===============================
x = 0 | f(x) = 2.800818e+15 | 2.800818e+15
x = 1 | f(x) = 9.878839e+14 | 9.878839e+14
write lock file:
FemModel initialization elapsed time: 0.0453205
Total Core solution elapsed time: 0.122921
Linear solver elapsed time: 0.0180781 (15%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 8.3e-16 < 1e-12 test id: 611 test name: 79NorthCMBalThic2dCG field: Gradient
SUCCESS difference: 5.4e-16 < 1e-12 test id: 611 test name: 79NorthCMBalThic2dCG field: Misfits
SUCCESS difference: 8e-16 < 1e-12 test id: 611 test name: 79NorthCMBalThic2dCG field: BalancethicknessThickeningRate
SUCCESS difference: 5.9e-16 < 1e-12 test id: 611 test name: 79NorthCMBalThic2dCG field: Thickness
----------------finished:611-----------------------
----------------starting:612-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
[
Error: Poor vertex distribution (processor with no vertices).
[
[
2
1
0
] ??? Error using ==>
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
p
:
:
:
72
72
72
[
[
[
2
1
0
]
]
]
checkconvergence
checkconvergence
checkconvergence
error message:
error message:
error message:
Solver residue is Na
Solver residue is Na
Solver residue is Na
N
N
N
job aborted:
[ranks] message
[0-2] process exited without calling finalize
---- error analysis -----
[0-2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test612.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test612 (line 28)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 612 test name: 79NorthPISMhydrofriction field: N/A
----------------finished:612-----------------------
----------------starting:613-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
NOTE: using initial velocities to create constraints along new boundary
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
preparing initial solution
x | Cost function f(x) | List of contributions
====================== step 1/2 ===============================
x = 0 | f(x) = 5.931532e+14 | 5.931532e+14
x = 1 | f(x) = 5.011022e+14 | 5.011022e+14
====================== step 2/2 ===============================
x = 0 | f(x) = 5.011022e+14 | 5.011022e+14
x = 1 | f(x) = 4.265126e+14 | 4.265126e+14
preparing final solution
write lock file:
FemModel initialization elapsed time: 0.0428667
Total Core solution elapsed time: 0.0295195
Linear solver elapsed time: 0.0166685 (56%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 1.2e-15 < 1e-12 test id: 613 test name: 79NorthCMBalThicVxVy field: Gradient1
SUCCESS difference: 8.3e-16 < 1e-12 test id: 613 test name: 79NorthCMBalThicVxVy field: Gradient2
SUCCESS difference: 5e-16 < 1e-12 test id: 613 test name: 79NorthCMBalThicVxVy field: Misfits
SUCCESS difference: 6.9e-17 < 1e-12 test id: 613 test name: 79NorthCMBalThicVxVy field: Vx
SUCCESS difference: 1.1e-16 < 1e-12 test id: 613 test name: 79NorthCMBalThicVxVy field: Vy
SUCCESS difference: 5.3e-16 < 1e-12 test id: 613 test name: 79NorthCMBalThicVxVy field: Thickness
----------------finished:613-----------------------
----------------starting:621-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
stochasticforcing.stocahstictimestep not specified: set to md.timestepping.time_step
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
Error: Poor vertex distribution (processor with no vertices).
[
[
[
2
0
1
] ??? Error using ==>
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
p
:
:
:
72
72
72
[
[
[
2
0
1
]
]
]
checkconvergence
checkconvergence
checkconvergence
error message:
error message:
error message:
Solver residue is Na
Solver residue is Na
Solver residue is Na
N
N
N
job aborted:
[ranks] message
[0-2] process exited without calling finalize
---- error analysis -----
[0-2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test621.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test621 (line 49)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 621 test name: 79NorthStochFrictionWaterPressure field: N/A
----------------finished:621-----------------------
----------------starting:622-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
smb.lapserates not specified: set to 0
launching solution sequence
Error: Poor vertex distribution (processor with no vertices).
[
[
2
1
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
:
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
[
:
72
0
72
[
] ??? Error using ==>
[
2
./modules/Solverx/Solverx.cp
1
]
p
]
checkconvergence
:
checkconvergence
error message:
72
error message:
Solver residue is Na
[
Solver residue is Na
N
0
N
]
checkconvergence
error message: Solver residue is NaN
job aborted:
[ranks] message
[0-2] process exited without calling finalize
---- error analysis -----
[0-2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test622.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test622 (line 85)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 622 test name: 79NorthHydrologyArmapw field: N/A
----------------finished:622-----------------------
----------------starting:801-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Error: Poor vertex distribution (processor with no vertices).
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
[
[
[
2
0
1
] ??? Error using ==>
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
p
:
:
:
72
72
72
[
[
[
2
0
1
]
]
]
checkconvergence
checkconvergence
checkconvergence
error message:
error message:
error message:
Solver residue is Na
Solver residue is Na
Solver residue is Na
N
N
N
job aborted:
[ranks] message
[0] process exited without calling finalize
[1] terminated
[2] process exited without calling finalize
---- error analysis -----
[0,2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test801.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test801 (line 17)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 801 test name: ValleyGlacierLevelsetSSA2d field: N/A
----------------finished:801-----------------------
----------------starting:802-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Error: Poor vertex distribution (processor with no vertices).
Error: Poor vertex distribution (processor with no vertices).
[
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
solver residue too high!: norm(KU-F)/norm(F)=inf > 1e-06 (md.settings.solver_residue_threshold)
WARNING: Solver failed, Trying Recovery Mode
Error: Poor vertex distribution (processor with no vertices).
solver residue too high!: norm(KU-F)/norm(F)=inf > 1e-06 (md.settings.solver_residue_threshold)
[
[
2
1
0
] ??? Error using ==>
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
p
:
:
:
41
41
41
[
[
[
2
1
0
]
]
]
Solver
Solver
Solver
x
x
x
error message:
error message:
error message:
Recovery solver failed..
Recovery solver failed..
Recovery solver failed..
.
.
.
job aborted:
[ranks] message
[0-2] process exited without calling finalize
---- error analysis -----
[0-2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test802.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test802 (line 22)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 802 test name: ValleyGlacierLevelsetThermalSSA3d field: N/A
----------------finished:802-----------------------
----------------starting:803-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Error: Poor vertex distribution (processor with no vertices).
Error: Poor vertex distribution (processor with no vertices).
[
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
solver residue too high!: norm(KU-F)/norm(F)=inf > 1e-06 (md.settings.solver_residue_threshold)
WARNING: Solver failed, Trying Recovery Mode
Error: Poor vertex distribution (processor with no vertices).
solver residue too high!: norm(KU-F)/norm(F)=inf > 1e-06 (md.settings.solver_residue_threshold)
[
[
1
0
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
:
2
:
41
] ??? Error using ==>
41
[
./modules/Solverx/Solverx.cp
[
1
p
]
:
Solver
41
x
0
[
error message:
]
2
Recovery solver failed..
Solver
]
.
x
Solver
error message:
x
Recovery solver failed..
error message:
.
Recovery solver failed..
.
job aborted:
[ranks] message
[0-2] process exited without calling finalize
---- error analysis -----
[0-2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test803.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test803 (line 24)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 803 test name: ValleyGlacierLevelsetEnthalpyHO3d field: N/A
----------------finished:803-----------------------
----------------starting:804-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Error: Poor vertex distribution (processor with no vertices).
Error: Poor vertex distribution (processor with no vertices).
[
[
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
solver residue too high!: norm(KU-F)/norm(F)=inf > 1e-06 (md.settings.solver_residue_threshold)
WARNING: Solver failed, Trying Recovery Mode
Error: Poor vertex distribution (processor with no vertices).
solver residue too high!: norm(KU-F)/norm(F)=inf > 1e-06 (md.settings.solver_residue_threshold)
[
2
1
0
] ??? Error using ==>
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
p
:
:
:
41
41
41
[
[
[
2
0
]
]
Solver
Solver
x
x
error message:
error message:
Recovery solver failed..
Recovery solver failed..
.
.
1] Solverx error message: Recovery solver failed...
job aborted:
[ranks] message
[0-1] process exited without calling finalize
[2] terminated
---- error analysis -----
[0-1] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test804.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test804 (line 20)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 804 test name: ValleyGlacierLevelsetCalvingSIA2d field: N/A
----------------finished:804-----------------------
----------------starting:805-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
[
Error: Poor vertex distribution (processor with no vertices).
Error: Poor vertex distribution (processor with no vertices).
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
solver residue too high!: norm(KU-F)/norm(F)=inf > 1e-06 (md.settings.solver_residue_threshold)
WARNING: Solver failed, Trying Recovery Mode
Error: Poor vertex distribution (processor with no vertices).
solver residue too high!: norm(KU-F)/norm(F)=inf > 1e-06 (md.settings.solver_residue_threshold)
[
[
2
0
1
] ??? Error using ==>
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
p
:
:
:
41
41
41
[
[
2
[
1
]
0
]
Solver
]
Solver
x
Solver
x
error message:
x
error message:
Recovery solver failed..
error message:
Recovery solver failed..
.
Recovery solver failed..
.
.
job aborted:
[ranks] message
[0-2] process exited without calling finalize
---- error analysis -----
[0-2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test805.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test805 (line 29)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 805 test name: ValleyGlacierLevelsetEnthCalvingHO3d field: N/A
----------------finished:805-----------------------
----------------starting:806-----------------------
boundary conditions for stressbalance model: spc set as zero
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
[
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
[
2
Error: Poor vertex distribution (processor with no vertices).
0
[
] ??? Error using ==>
] ??? Error using ==>
1
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
] ??? Error using ==>
p
p
./modules/Solverx/Solverx.cp
:
:
p
72
72
:
[
[
72
2
0
[
]
]
1
checkconvergence
checkconvergence
]
error message:
error message:
checkconvergence
Solver residue is Na
Solver residue is Na
error message:
N
N
Solver residue is Na
N
job aborted:
[ranks] message
[0-2] process exited without calling finalize
---- error analysis -----
[0-2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test806.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test806 (line 37)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 806 test name: SquareShelfLevelsetCalvingSSA2dLevermann field: N/A
----------------finished:806-----------------------
----------------starting:807-----------------------
boundary conditions for stressbalance model: spc set as zero
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Error: Poor vertex distribution (processor with no vertices).
[
[
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
[
2
1
0
] ??? Error using ==>
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
p
:
:
:
72
72
72
[
[
[
2
1
0
]
]
]
checkconvergence
checkconvergence
checkconvergence
error message:
error message:
error message:
Solver residue is Na
Solver residue is Na
Solver residue is Na
N
N
N
job aborted:
[ranks] message
[0-2] process exited without calling finalize
---- error analysis -----
[0-2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test807.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test807 (line 33)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 807 test name: SquareShelfLevelsetMeltingSSA2d field: N/A
----------------finished:807-----------------------
----------------starting:808-----------------------
boundary conditions for stressbalance model: spc set as zero
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
Error: Poor vertex distribution (processor with no vertices).
[
[
[
0
1
2
] ??? Error using ==>
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
p
:
:
:
72
72
72
[
[
[
0
1
2
]
]
]
checkconvergence
checkconvergence
checkconvergence
error message:
error message:
error message:
Solver residue is Na
Solver residue is Na
Solver residue is Na
N
N
N
job aborted:
[ranks] message
[0-2] process exited without calling finalize
---- error analysis -----
[0-2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test808.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test808 (line 36)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 808 test name: SquareShelfLevelsetCalvingSSA2dMinThickness field: N/A
----------------finished:808-----------------------
----------------starting:809-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
Error: Poor vertex distribution (processor with no vertices).
[
[
[
2
1
0
] ??? Error using ==>
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
p
:
:
:
72
72
72
[
[
[
2
1
0
]
]
]
checkconvergence
checkconvergence
checkconvergence
error message:
error message:
error message:
Solver residue is Na
Solver residue is Na
Solver residue is Na
N
N
N
job aborted:
[ranks] message
[0-2] process exited without calling finalize
---- error analysis -----
[0-2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test809.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test809 (line 26)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 809 test name: ValleyGlacierLevelsetCalvingSSA2dCrevassedepth field: N/A
----------------finished:809-----------------------
----------------starting:810-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Error: Poor vertex distribution (processor with no vertices).
[
[
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
[
1
2
0
] ??? Error using ==>
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
p
:
:
:
72
72
72
[
[
[
1
2
0
]
]
]
checkconvergence
checkconvergence
checkconvergence
error message:
error message:
error message:
Solver residue is Na
Solver residue is Na
Solver residue is Na
N
N
N
job aborted:
[ranks] message
[0-2] process exited without calling finalize
---- error analysis -----
[0-2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test810.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test810 (line 18)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 810 test name: ValleyGlacierLevelsetMOLHO2d field: N/A
----------------finished:810-----------------------
----------------starting:811-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Error: Poor vertex distribution (processor with no vertices).
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
[
[
[
2
0
1
] ??? Error using ==>
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
p
:
:
:
72
72
72
[
[
[
2
0
1
]
]
]
checkconvergence
checkconvergence
checkconvergence
error message:
error message:
error message:
Solver residue is Na
Solver residue is Na
Solver residue is Na
N
N
N
job aborted:
[ranks] message
[0-2] process exited without calling finalize
---- error analysis -----
[0-2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test811.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test811 (line 21)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 811 test name: ValleyGlacierLevelsetCalvingMOLHO2d field: N/A
----------------finished:811-----------------------
----------------starting:812-----------------------
boundary conditions for stressbalance model: spc set as zero
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
[
Error: Poor vertex distribution (processor with no vertices).
[
[
2
0
1
] ??? Error using ==>
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
p
:
:
:
72
72
72
[
[
[
2
0
1
]
]
]
checkconvergence
checkconvergence
checkconvergence
error message:
error message:
error message:
Solver residue is Na
Solver residue is Na
Solver residue is Na
N
N
N
job aborted:
[ranks] message
[0-2] process exited without calling finalize
---- error analysis -----
[0-2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test812.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test812 (line 38)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 812 test name: SquareShelfLevelsetCalvingMOLHO2dLevermann field: N/A
----------------finished:812-----------------------
----------------starting:813-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Error: Poor vertex distribution (processor with no vertices).
Error: Poor vertex distribution (processor with no vertices).
[
[
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
solver residue too high!: norm(KU-F)/norm(F)=inf > 1e-06 (md.settings.solver_residue_threshold)
WARNING: Solver failed, Trying Recovery Mode
Error: Poor vertex distribution (processor with no vertices).
solver residue too high!: norm(KU-F)/norm(F)=inf > 1e-06 (md.settings.solver_residue_threshold)
[
1
2
0
] ??? Error using ==>
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
p
:
:
:
41
41
41
[
[
[
1
2
0
]
]
]
Solver
Solver
Solver
x
x
x
error message:
error message:
error message:
Recovery solver failed..
Recovery solver failed..
Recovery solver failed..
.
.
.
job aborted:
[ranks] message
[0-2] process exited without calling finalize
---- error analysis -----
[0-2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test813.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test813 (line 44)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 813 test name: SquareShelfLevelsetKillberg field: N/A
----------------finished:813-----------------------
----------------starting:814-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Error: Poor vertex distribution (processor with no vertices).
[
[
Error: Poor vertex distribution (processor with no vertices).
[
2
0
1
] ??? Error using ==>
] ??? Error using ==>
] ??? Error using ==>
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
./modules/Solverx/Solverx.cp
p
p
p
:
:
:
72
72
72
[
[
[
0
2
1
]
]
]
checkconvergence
checkconvergence
checkconvergence
error message:
error message:
error message:
Solver residue is Na
Solver residue is Na
Solver residue is Na
N
N
N
job aborted:
[ranks] message
[0-2] process exited without calling finalize
---- error analysis -----
[0-2] on DESKTOP-E1JF6TM
C:\Users\jenkins\Jenkins\workspace\Windows-Basic\\bin\issm.exe ended prematurely and may have crashed. exit code 1
---- error analysis -----
Error using loadresultsfromdisk
=========================================================================
Binary file test814.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test814 (line 27)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 814 test name: SSA2dCDCalvingButtressing field: N/A
----------------finished:814-----------------------
----------------starting:900-----------------------
no hydrology.basal_moulin_input specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.0681221
Total Core solution elapsed time: 1.72084
Linear solver elapsed time: 0.310655 (18%)
Total elapsed time: 0 hrs 0 min 1 sec
SUCCESS difference: 1.4e-15 < 1e-13 test id: 900 test name: SquareNoDynUnConfinedHydroDC field: SedimentWaterHead1
SUCCESS difference: 2e-15 < 1e-13 test id: 900 test name: SquareNoDynUnConfinedHydroDC field: SedimentWaterHead2
----------------finished:900-----------------------
----------------starting:901-----------------------
no hydrology.basal_moulin_input specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.0488883
Total Core solution elapsed time: 0.0441219
Linear solver elapsed time: 0.0106935 (24%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 6.8e-16 < 1e-13 test id: 901 test name: SquareNoDynHydrologyDCOneLayer field: SedimentWaterHead
SUCCESS difference: 1.7e-10 < 3e-10 test id: 901 test name: SquareNoDynHydrologyDCOneLayer field: SedimentHeadResidual
----------------finished:901-----------------------
----------------starting:902-----------------------
no hydrology.basal_moulin_input specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.0771659
Total Core solution elapsed time: 0.45303
Linear solver elapsed time: 0.106723 (24%)
Total elapsed time: 0 hrs 0 min 0 sec
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.0804439
Total Core solution elapsed time: 0.510693
Linear solver elapsed time: 0.121334 (24%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 8.5e-16 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: SedimentWaterHead1
SUCCESS difference: 0 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: EplWaterHead1
SUCCESS difference: 0 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: SedimentHeadResidual1
SUCCESS difference: 1.1e-15 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: SedimentWaterHead4
SUCCESS difference: 0 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: EplWaterHead4
SUCCESS difference: 0 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: SedimentHeadResidual4
SUCCESS difference: 1.4e-15 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: SedimentWaterHead5
SUCCESS difference: 3.6e-15 < 5e-12 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: EplWaterHead5
SUCCESS difference: 0 < 1e-11 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: SedimentHeadResidual5
SUCCESS difference: 2.3e-15 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: SedimentWaterHead9
SUCCESS difference: 7.6e-15 < 5e-12 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: EplWaterHead9
SUCCESS difference: 0 < 1e-11 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: SedimentHeadResidual9
SUCCESS difference: 7.2e-15 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: EplWaterHead10
SUCCESS difference: 8.6e-15 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: EplWaterHeadSubstep10
SUCCESS difference: 1.8e-15 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: SedimentWaterHead10
SUCCESS difference: 2.3e-15 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: SedimentWaterHeadSubstep10
----------------finished:902-----------------------
----------------starting:903-----------------------
no hydrology.basal_moulin_input specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.0811036
Total Core solution elapsed time: 0.0841701
Linear solver elapsed time: 0.0127667 (15%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 1.1e-15 < 1e-13 test id: 903 test name: SquareNoDynExtrudedHydrologyDCOneLayer field: SedimentWaterHead
SUCCESS difference: 1.7e-10 < 3e-10 test id: 903 test name: SquareNoDynExtrudedHydrologyDCOneLayer field: SedimentHeadResidual
----------------finished:903-----------------------
----------------starting:904-----------------------
no hydrology.basal_moulin_input specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.145984
Total Core solution elapsed time: 0.738321
Linear solver elapsed time: 0.107079 (15%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 1e-15 < 1e-13 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: SedimentWaterHead1
SUCCESS difference: 0 < 1e-13 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: EplWaterHead1
SUCCESS difference: 0 < 1e-13 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: SedimentHeadResidual1
SUCCESS difference: 1.1e-15 < 1e-13 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: SedimentWaterHead4
SUCCESS difference: 0 < 1e-13 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: EplWaterHead4
SUCCESS difference: 0 < 1e-13 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: SedimentHeadResidual4
SUCCESS difference: 1.4e-15 < 1e-13 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: SedimentWaterHead5
SUCCESS difference: 3.6e-15 < 5e-12 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: EplWaterHead5
SUCCESS difference: 0 < 2e-11 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: SedimentHeadResidual5
SUCCESS difference: 2.3e-15 < 1e-13 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: SedimentWaterHead9
SUCCESS difference: 7.6e-15 < 5e-12 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: EplWaterHead9
SUCCESS difference: 0 < 2e-11 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: SedimentHeadResidual9
----------------finished:904-----------------------
----------------starting:905-----------------------
no hydrology.basal_moulin_input specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.0773153
Total Core solution elapsed time: 2.32317
Linear solver elapsed time: 0.298455 (13%)
Total elapsed time: 0 hrs 0 min 2 sec
WARNING! There are options you set that were not used!
WARNING! could be spelling mistake, etc!
There are 6 unused database options. They are:
Option left: name:-ksp_type value: preonly source: code
Option left: name:-mat_mumps_icntl_14 value: 120 source: code
Option left: name:-mat_mumps_icntl_28 value: 2 source: code
Option left: name:-mat_mumps_icntl_29 value: 2 source: code
Option left: name:-pc_factor_mat_solver_type value: mumps source: code
Option left: name:-pc_type value: lu source: code
SUCCESS difference: 0 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: SedimentWaterHead1
SUCCESS difference: 0 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: EplWaterHead1
SUCCESS difference: 0 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: SedimentHeadResidual1
SUCCESS difference: 0 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: SedimentWaterHead4
SUCCESS difference: 0 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: EplWaterHead4
SUCCESS difference: 0 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: SedimentHeadResidual4
SUCCESS difference: 0 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: SedimentWaterHead5
SUCCESS difference: 0 < 5e-12 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: EplWaterHead5
SUCCESS difference: 0 < 1e-11 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: SedimentHeadResidual5
SUCCESS difference: 1.3e-15 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: SedimentWaterHead9
SUCCESS difference: 0 < 5e-12 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: EplWaterHead9
SUCCESS difference: 0 < 1e-11 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: SedimentHeadResidual9
SUCCESS difference: 0 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: EplWaterHead20
SUCCESS difference: 0 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: EplWaterHeadSubstep20
SUCCESS difference: 2.6e-15 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: SedimentWaterHead20
SUCCESS difference: 3.1e-15 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: SedimentWaterHeadSubstep20
----------------finished:905-----------------------
----------------starting:906-----------------------
no hydrology.basal_moulin_input specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.0784765
Total Core solution elapsed time: 10.7642
Linear solver elapsed time: 3.97414 (37%)
Total elapsed time: 0 hrs 0 min 10 sec
SUCCESS difference: 6.6e-16 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: SedimentWaterHead2
SUCCESS difference: 2.4e-14 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: EplWaterHead2
SUCCESS difference: 1.7e-14 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: SedimentHeadResidual2
SUCCESS difference: 8.6e-16 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: SedimentHeadSubstep2
SUCCESS difference: 2.2e-14 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: EplHeadSubstep2
SUCCESS difference: 0 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: HydrologySubsteps2
SUCCESS difference: 0 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: HydrologySubTime2
SUCCESS difference: 1.4e-15 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: SedimentWaterHead3
SUCCESS difference: 1.4e-14 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: EplWaterHead3
SUCCESS difference: 7.9e-15 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: SedimentHeadResidual3
----------------finished:906-----------------------
MATLABEXITEDCORRECTLY
-----------End of matlab_log.log-----------
Build step 'Execute shell' marked build as failure
Recording test results
Finished: FAILURE
