This log is too long to show here, 1,723 KB has been skipped — click to see the complete log
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),216,274,362,423,430,433,435,441:442,448,456,462:464,470:476,508,517,544,546,550,808],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 507 test name: PigTranFS field: N/A
----------------finished:507-----------------------
----------------starting:509-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.016279
Total Core solution elapsed time: 1.58789
Linear solver elapsed time: 1.20167 (76%)
Total elapsed time: 0 hrs 0 min 1 sec
WARNING! There are options you set that were not used!
WARNING! could be spelling mistake, etc!
There are 7 unused database options. They are:
Option left: name:-ksp_type value: preonly source: code
Option left: name:-mat_mumps_icntl_14 value: 120 source: code
Option left: name:-mat_mumps_icntl_28 value: 2 source: code
Option left: name:-mat_mumps_icntl_29 value: 2 source: code
Option left: name:-mat_type value: mpiaij source: code
Option left: name:-pc_factor_mat_solver_type value: mumps source: code
Option left: name:-pc_type value: lu source: code
SUCCESS difference: 6.6e-10 < 3e-09 test id: 509 test name: PigSteaHO field: Vx
SUCCESS difference: 6.7e-10 < 3e-09 test id: 509 test name: PigSteaHO field: Vy
SUCCESS difference: 2.9e-08 < 5e-08 test id: 509 test name: PigSteaHO field: Vz
SUCCESS difference: 2.9e-08 < 5e-08 test id: 509 test name: PigSteaHO field: Vel
SUCCESS difference: 2.1e-16 < 1e-09 test id: 509 test name: PigSteaHO field: Pressure
SUCCESS difference: 4.4e-09 < 8e-09 test id: 509 test name: PigSteaHO field: Temperature
SUCCESS difference: 4.8e-08 < 1e-06 test id: 509 test name: PigSteaHO field: BasalforcingsGroundediceMeltingRate
----------------finished:509-----------------------
----------------starting:510-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.063666
Total Core solution elapsed time: 0.959495
Linear solver elapsed time: 0.701337 (73%)
Total elapsed time: 0 hrs 0 min 1 sec
WARNING! There are options you set that were not used!
WARNING! could be spelling mistake, etc!
There are 7 unused database options. They are:
Option left: name:-ksp_type value: preonly source: code
Option left: name:-mat_mumps_icntl_14 value: 120 source: code
Option left: name:-mat_mumps_icntl_28 value: 2 source: code
Option left: name:-mat_mumps_icntl_29 value: 2 source: code
Option left: name:-mat_type value: mpiaij source: code
Option left: name:-pc_factor_mat_solver_type value: mumps source: code
Option left: name:-pc_type value: lu source: code
SUCCESS difference: 4.5e-11 < 1e-08 test id: 510 test name: PigSteaFS field: Vx
SUCCESS difference: 1.6e-11 < 1e-08 test id: 510 test name: PigSteaFS field: Vy
SUCCESS difference: 5.1e-12 < 1e-08 test id: 510 test name: PigSteaFS field: Vz
SUCCESS difference: 5.2e-12 < 1e-08 test id: 510 test name: PigSteaFS field: Vel
SUCCESS difference: 1.2e-11 < 1e-08 test id: 510 test name: PigSteaFS field: Pressure
SUCCESS difference: 5.5e-13 < 1e-08 test id: 510 test name: PigSteaFS field: Temperature
SUCCESS difference: 1.4e-07 < 1e-06 test id: 510 test name: PigSteaFS field: BasalforcingsGroundediceMeltingRate
----------------finished:510-----------------------
----------------starting:511-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
NOTE: using observed velocities to create constraints along new boundary
INFO: the outlog will look better if only md.verbose.control is turned on
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
x | Cost function f(x) | List of contributions
====================== step 1/2 ===============================
x = 0 | f(x) = 0.0537942 | 0.0537942
x = 1 | f(x) = 0.04886803 | 0.04886803
====================== step 2/2 ===============================
x = 0 | f(x) = 0.04875168 | 0.04875168
x = 1 | f(x) = 0.05273747 | 0.05273747
x = 0.381966 | f(x) = 0.04920111 | 0.04920111
x = 0.618034 | f(x) = 0.05036058 | 0.05036058
write lock file:
FemModel initialization elapsed time: 0.005915
Total Core solution elapsed time: 0.084586
Linear solver elapsed time: 0.023993 (28%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 3.6e-13 < 5e-11 test id: 511 test name: PigCMBFS field: Gradient
SUCCESS difference: 3.2e-13 < 5e-11 test id: 511 test name: PigCMBFS field: Misfits
SUCCESS difference: 1.9e-13 < 5e-11 test id: 511 test name: PigCMBFS field: MaterialsRheologyB
SUCCESS difference: 5.6e-11 < 1e-09 test id: 511 test name: PigCMBFS field: Pressure
SUCCESS difference: 3e-13 < 1e-11 test id: 511 test name: PigCMBFS field: Vel
SUCCESS difference: 5.2e-13 < 5e-11 test id: 511 test name: PigCMBFS field: Vx
SUCCESS difference: 2.4e-13 < 1e-11 test id: 511 test name: PigCMBFS field: Vy
----------------finished:511-----------------------
----------------starting:512-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
INFO: the outlog will look better if only md.verbose.control is turned on
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
x | Cost function f(x) | List of contributions
====================== step 1/2 ===============================
x = 0 | f(x) = 125.7301 | 125.7294 0.0006420665
x = 1 | f(x) = 119.1969 | 119.1962 0.0006447865
====================== step 2/2 ===============================
x = 0 | f(x) = 119.1154 | 119.1148 0.0006447865
x = 1 | f(x) = 112.5636 | 112.563 0.0006652195
write lock file:
FemModel initialization elapsed time: 0.010292
Total Core solution elapsed time: 0.422401
Linear solver elapsed time: 0.301667 (71%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 2.5e-13 < 1e-11 test id: 512 test name: PigCMDragHO field: Gradient
SUCCESS difference: 1.1e-13 < 1e-11 test id: 512 test name: PigCMDragHO field: Misfits
SUCCESS difference: 2.4e-14 < 1e-11 test id: 512 test name: PigCMDragHO field: FrictionCoefficient
SUCCESS difference: 0 < 1e-11 test id: 512 test name: PigCMDragHO field: Pressure
SUCCESS difference: 2.7e-13 < 1e-11 test id: 512 test name: PigCMDragHO field: Vel
SUCCESS difference: 4.5e-13 < 1e-11 test id: 512 test name: PigCMDragHO field: Vx
SUCCESS difference: 2.8e-13 < 1e-11 test id: 512 test name: PigCMDragHO field: Vy
----------------finished:512-----------------------
----------------starting:513-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
INFO: the outlog will look better if only md.verbose.control is turned on
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
x | Cost function f(x) | List of contributions
====================== step 1/2 ===============================
x = 0 | f(x) = 99.51715 | 99.51669 0.0004575168
x = 1 | f(x) = 93.99829 | 93.99784 0.0004559883
====================== step 2/2 ===============================
x = 0 | f(x) = 93.78083 | 93.78038 0.0004559883
x = 1 | f(x) = 88.30076 | 88.3003 0.0004621097
write lock file:
FemModel initialization elapsed time: 0.012094
Total Core solution elapsed time: 2.57117
Linear solver elapsed time: 1.81977 (71%)
Total elapsed time: 0 hrs 0 min 2 sec
WARNING! There are options you set that were not used!
WARNING! could be spelling mistake, etc!
There are 7 unused database options. They are:
Option left: name:-ksp_type value: preonly source: code
Option left: name:-mat_mumps_icntl_14 value: 120 source: code
Option left: name:-mat_mumps_icntl_28 value: 2 source: code
Option left: name:-mat_mumps_icntl_29 value: 2 source: code
Option left: name:-mat_type value: mpiaij source: code
Option left: name:-pc_factor_mat_solver_type value: mumps source: code
Option left: name:-pc_type value: lu source: code
SUCCESS difference: 2.8e-11 < 5e-08 test id: 513 test name: PigCMDragSteaSSA3d field: Gradient
SUCCESS difference: 4.5e-12 < 4e-10 test id: 513 test name: PigCMDragSteaSSA3d field: Misfits
SUCCESS difference: 1.6e-12 < 1e-10 test id: 513 test name: PigCMDragSteaSSA3d field: FrictionCoefficient
SUCCESS difference: 2.1e-16 < 1e-10 test id: 513 test name: PigCMDragSteaSSA3d field: Pressure
SUCCESS difference: 3.6e-11 < 3e-06 test id: 513 test name: PigCMDragSteaSSA3d field: Vel
SUCCESS difference: 9.8e-11 < 4e-06 test id: 513 test name: PigCMDragSteaSSA3d field: Vx
SUCCESS difference: 3e-11 < 4e-06 test id: 513 test name: PigCMDragSteaSSA3d field: Vy
SUCCESS difference: 4.2e-11 < 3e-06 test id: 513 test name: PigCMDragSteaSSA3d field: Vz
SUCCESS difference: 3.6e-11 < 2e-06 test id: 513 test name: PigCMDragSteaSSA3d field: Temperature
SUCCESS difference: 3.1e-08 < 2e-06 test id: 513 test name: PigCMDragSteaSSA3d field: BasalforcingsGroundediceMeltingRate
----------------finished:513-----------------------
----------------starting:514-----------------------
Construction of a mesh from a given geometry
Construction of a mesh from a given geometry
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
Anisotropic mesh adaptation
new number of triangles = 485
Anisotropic mesh adaptation
new number of triangles = 485
Anisotropic mesh adaptation
new number of triangles = 1651
Anisotropic mesh adaptation
new number of triangles = 6702
Anisotropic mesh adaptation
new number of triangles = 2307
SUCCESS difference: 1.4e-16 < 2e-10 test id: 514 test name: PigBamgMesh field: x1
SUCCESS difference: 1.8e-16 < 7e-10 test id: 514 test name: PigBamgMesh field: y1
SUCCESS difference: 1.4e-16 < 1e-13 test id: 514 test name: PigBamgMesh field: x2
SUCCESS difference: 9e-17 < 1e-13 test id: 514 test name: PigBamgMesh field: y2
SUCCESS difference: 5.6e-16 < 1e-13 test id: 514 test name: PigBamgMesh field: x3
SUCCESS difference: 8.1e-16 < 1e-13 test id: 514 test name: PigBamgMesh field: y3
SUCCESS difference: 5.6e-16 < 1e-13 test id: 514 test name: PigBamgMesh field: x4
SUCCESS difference: 8.1e-16 < 1e-13 test id: 514 test name: PigBamgMesh field: y4
SUCCESS difference: 8.4e-16 < 1e-13 test id: 514 test name: PigBamgMesh field: x5
SUCCESS difference: 1.1e-15 < 1e-13 test id: 514 test name: PigBamgMesh field: y5
SUCCESS difference: 1.4e-16 < 1e-13 test id: 514 test name: PigBamgMesh field: x6
SUCCESS difference: 4.5e-16 < 1e-13 test id: 514 test name: PigBamgMesh field: y6
SUCCESS difference: 2.8e-16 < 1e-13 test id: 514 test name: PigBamgMesh field: x7
SUCCESS difference: 4.5e-16 < 1e-13 test id: 514 test name: PigBamgMesh field: y7
----------------finished:514-----------------------
----------------starting:515-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.010991
Total Core solution elapsed time: 0.137923
Linear solver elapsed time: 0.087743 (64%)
Total elapsed time: 0 hrs 0 min 0 sec
WARNING! There are options you set that were not used!
WARNING! could be spelling mistake, etc!
There are 7 unused database options. They are:
Option left: name:-ksp_type value: preonly source: code
Option left: name:-mat_mumps_icntl_14 value: 120 source: code
Option left: name:-mat_mumps_icntl_28 value: 2 source: code
Option left: name:-mat_mumps_icntl_29 value: 2 source: code
Option left: name:-mat_type value: mpiaij source: code
Option left: name:-pc_factor_mat_solver_type value: mumps source: code
Option left: name:-pc_type value: lu source: code
SUCCESS difference: 2.5e-15 < 1e-13 test id: 515 test name: PigTherTranSUPG field: Temperature1
SUCCESS difference: 2.1e-16 < 1e-08 test id: 515 test name: PigTherTranSUPG field: BasalforcingsGroundediceMeltingRate1
SUCCESS difference: 2.6e-15 < 1e-13 test id: 515 test name: PigTherTranSUPG field: Temperature2
SUCCESS difference: 1.9e-08 < 5e-08 test id: 515 test name: PigTherTranSUPG field: BasalforcingsGroundediceMeltingRate2
----------------finished:515-----------------------
----------------starting:516-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.012689
Total Core solution elapsed time: 0.038693
Linear solver elapsed time: 0.024249 (63%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 1.3e-13 < 1e-11 test id: 516 test name: PigTherSteaSUPG field: Temperature
SUCCESS difference: 6.9e-13 < 1e-11 test id: 516 test name: PigTherSteaSUPG field: BasalforcingsGroundediceMeltingRate
----------------finished:516-----------------------
----------------starting:518-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.011747
Total Core solution elapsed time: 0.215961
Linear solver elapsed time: 0.188148 (87%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 4.2e-13 < 5e-13 test id: 518 test name: PigStressMOLHO2d field: Vx
SUCCESS difference: 5.3e-13 < 6e-13 test id: 518 test name: PigStressMOLHO2d field: Vy
SUCCESS difference: 5.1e-13 < 6e-13 test id: 518 test name: PigStressMOLHO2d field: Vel
SUCCESS difference: 3.2e-16 < 1e-13 test id: 518 test name: PigStressMOLHO2d field: Pressure
SUCCESS difference: 4.2e-13 < 5e-13 test id: 518 test name: PigStressMOLHO2d field: VxSurface
SUCCESS difference: 5.3e-13 < 6e-13 test id: 518 test name: PigStressMOLHO2d field: VySurface
SUCCESS difference: 2.3e-14 < 1e-13 test id: 518 test name: PigStressMOLHO2d field: VxShear
SUCCESS difference: 6.6e-14 < 1e-13 test id: 518 test name: PigStressMOLHO2d field: VyShear
SUCCESS difference: 4.2e-13 < 5e-13 test id: 518 test name: PigStressMOLHO2d field: VxBase
SUCCESS difference: 5.3e-13 < 6e-13 test id: 518 test name: PigStressMOLHO2d field: VyBase
----------------finished:518-----------------------
----------------starting:519-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
Warning: expecting coordinates in polar stereographic (Std Latitude: 71S Meridian: 0)
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:
720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test519.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test519 (line 12)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),216,274,362,423,430,433,435,441:442,448,456,462:464,470:476,508,517,544,546,550,808],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 519 test name: PigTranMOLHO2d field: N/A
----------------finished:519-----------------------
----------------starting:520-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
Warning: expecting coordinates in polar stereographic (Std Latitude: 71S Meridian: 0)
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test520.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test520 (line 17)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),216,274,362,423,430,433,435,441:442,448,456,462:464,470:476,508,517,544,546,550,808],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 520 test name: PigTran-IntrusionMelt field: N/A
----------------finished:520-----------------------
----------------starting:521-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
checking model consistency
INFO: the outlog will look better if only md.verbose.control is turned on
marshalling file /Users/jenkins/workspace/macOS-Silicon-Basic//execution/test521-06-30-2026-05-11-22-83280/test521.bin
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
call computational core:
=== NUDGING STEP 1/3 ===
iteration 1/2 time [yr]: 0.50 (time step: 0.50)
computing smb
computing new velocity
computing basal mass balance
computing mass transport
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
loading results from cluster
Error using loadresultsfromdisk
=========================================================================
Binary file test521.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test521 (line 31)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),216,274,362,423,430,433,435,441:442,448,456,462:464,470:476,508,517,544,546,550,808],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 521 test name: PigNudgingSSA2d field: N/A
----------------finished:521-----------------------
----------------starting:530-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.006294
Total Core solution elapsed time: 0.029499
Linear solver elapsed time: 0.022629 (77%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 4.2e-16 < 1e-13 test id: 530 test name: PigBalVel1 field: DrivingStressX
SUCCESS difference: 7.7e-16 < 1e-13 test id: 530 test name: PigBalVel1 field: DrivingStressX
SUCCESS difference: 0 < 1e-13 test id: 530 test name: PigBalVel1 field: Vel
----------------finished:530-----------------------
----------------starting:531-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.041974
Total Core solution elapsed time: 0.030182
Linear solver elapsed time: 0.021588 (72%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 5.3e-16 < 1e-13 test id: 531 test name: PigBalVel2 field: DrivingStressX
SUCCESS difference: 6.7e-16 < 1e-13 test id: 531 test name: PigBalVel2 field: DrivingStressX
SUCCESS difference: 0 < 1e-13 test id: 531 test name: PigBalVel2 field: Vel
----------------finished:531-----------------------
----------------starting:540-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test540.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test540 (line 24)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),216,274,362,423,430,433,435,441:442,448,456,462:464,470:476,508,517,544,546,550,808],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 540 test name: PigTranCalvingDevSSA2d field: N/A
----------------finished:540-----------------------
----------------starting:541-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test541.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test541 (line 24)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),216,274,362,423,430,433,435,441:442,448,456,462:464,470:476,508,517,544,546,550,808],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 541 test name: PigTranCalvingDevHO3d field: N/A
----------------finished:541-----------------------
----------------starting:542-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test542.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test542 (line 43)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),216,274,362,423,430,433,435,441:442,448,456,462:464,470:476,508,517,544,546,550,808],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 542 test name: PigTranFrontalforcingsrignot field: N/A
----------------finished:542-----------------------
----------------starting:543-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
stochasticforcing.stocahstictimestep not specified: set to md.timestepping.time_step
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test543.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test543 (line 123)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),216,274,362,423,430,433,435,441:442,448,456,462:464,470:476,508,517,544,546,550,808],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 543 test name: PigTranRignotarma field: N/A
----------------finished:543-----------------------
----------------starting:545-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
stochasticforcing.stocahstictimestep not specified: set to md.timestepping.time_step
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test545.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test545 (line 89)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),216,274,362,423,430,433,435,441:442,448,456,462:464,470:476,508,517,544,546,550,808],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 545 test name: PigTranStochasticforcingCovariance field: N/A
----------------finished:545-----------------------
----------------starting:601-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test601.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test601 (line 7)
md=solve(md,'Masstransport');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),216,274,362,423,430,433,435,441:442,448,456,462:464,470:476,508,517,544,546,550,808],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 601 test name: 79NorthMasstransp2d field: N/A
----------------finished:601-----------------------
----------------starting:602-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.007777
Total Core solution elapsed time: 0.024191
Linear solver elapsed time: 0.019196 (79%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 8.9e-16 < 1e-13 test id: 602 test name: 79NorthMasstransp2dDG field: Thickness
----------------finished:602-----------------------
----------------starting:603-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test603.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test603 (line 8)
md=solve(md,'Masstransport');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),216,274,362,423,430,433,435,441:442,448,456,462:464,470:476,508,517,544,546,550,808],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 603 test name: 79NorthMasstransp3d field: N/A
----------------finished:603-----------------------
----------------starting:604-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.007544
Total Core solution elapsed time: 0.024578
Linear solver elapsed time: 0.0202 (82%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 7.2e-16 < 1e-13 test id: 604 test name: 79NorthSurfSlop2d field: SurfaceSlopeX
SUCCESS difference: 5.9e-16 < 1e-13 test id: 604 test name: 79NorthSurfSlop2d field: SurfaceSlopeY
----------------finished:604-----------------------
----------------starting:605-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.008634
Total Core solution elapsed time: 0.029926
Linear solver elapsed time: 0.023942 (80%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 7.2e-16 < 1e-13 test id: 605 test name: 79NorthSurfSlop3d field: SurfaceSlopeX
SUCCESS difference: 5.9e-16 < 1e-13 test id: 605 test name: 79NorthSurfSlop3d field: SurfaceSlopeY
----------------finished:605-----------------------
----------------starting:606-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.023171
Total Core solution elapsed time: 0.027675
Linear solver elapsed time: 0.022581 (82%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 6.1e-16 < 1e-13 test id: 606 test name: 79NorthBedSlop2d field: BedSlopeX
SUCCESS difference: 1.6e-15 < 1e-13 test id: 606 test name: 79NorthBedSlop2d field: BedSlopeY
----------------finished:606-----------------------
----------------starting:607-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.007873
Total Core solution elapsed time: 0.027653
Linear solver elapsed time: 0.022632 (82%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 6.1e-16 < 1e-13 test id: 607 test name: 79NorthBedSlop3d field: BedSlopeX
SUCCESS difference: 1.6e-15 < 1e-13 test id: 607 test name: 79NorthBedSlop3d field: BedSlopeY
----------------finished:607-----------------------
----------------starting:608-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.006255
Total Core solution elapsed time: 0.011903
Linear solver elapsed time: 0.009287 (78%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 2e-13 < 1e-12 test id: 608 test name: 79NorthBalThic2d field: Thickness
----------------finished:608-----------------------
----------------starting:610-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.005984
Total Core solution elapsed time: 0.001721
Linear solver elapsed time: 0 (0%)
Total elapsed time: 0 hrs 0 min 0 sec
WARNING! There are options you set that were not used!
WARNING! could be spelling mistake, etc!
There are 7 unused database options. They are:
Option left: name:-ksp_type value: preonly source: code
Option left: name:-mat_mumps_icntl_14 value: 120 source: code
Option left: name:-mat_mumps_icntl_28 value: 2 source: code
Option left: name:-mat_mumps_icntl_29 value: 2 source: code
Option left: name:-mat_type value: mpiaij source: code
Option left: name:-pc_factor_mat_solver_type value: mumps source: code
Option left: name:-pc_type value: lu source: code
SUCCESS difference: 8.9e-17 < 1e-12 test id: 610 test name: 79NorthPISMhydro field: WaterColumn1
SUCCESS difference: 1.8e-16 < 1e-12 test id: 610 test name: 79NorthPISMhydro field: WaterColumn2
SUCCESS difference: 1.8e-16 < 1e-12 test id: 610 test name: 79NorthPISMhydro field: WaterColumn3
----------------finished:610-----------------------
----------------starting:611-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
INFO: the outlog will look better if only md.verbose.control is turned on
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
x | Cost function f(x) | List of contributions
====================== step 1/2 ===============================
x = 0 | f(x) = 5.576527e+15 | 5.576527e+15
x = 1 | f(x) = 2.800818e+15 | 2.800818e+15
====================== step 2/2 ===============================
x = 0 | f(x) = 2.800818e+15 | 2.800818e+15
x = 1 | f(x) = 9.878839e+14 | 9.878839e+14
write lock file:
FemModel initialization elapsed time: 0.006891
Total Core solution elapsed time: 0.062638
Linear solver elapsed time: 0.043902 (70%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 1.9e-13 < 1e-12 test id: 611 test name: 79NorthCMBalThic2dCG field: Gradient
SUCCESS difference: 1.9e-14 < 1e-12 test id: 611 test name: 79NorthCMBalThic2dCG field: Misfits
SUCCESS difference: 2.4e-13 < 1e-12 test id: 611 test name: 79NorthCMBalThic2dCG field: BalancethicknessThickeningRate
SUCCESS difference: 2.2e-13 < 1e-12 test id: 611 test name: 79NorthCMBalThic2dCG field: Thickness
----------------finished:611-----------------------
----------------starting:612-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.011432
Total Core solution elapsed time: 0.139163
Linear solver elapsed time: 0.120076 (86%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 8.7e-12 < 2e-11 test id: 612 test name: 79NorthPISMhydrofriction field: Vx1
SUCCESS difference: 9.8e-12 < 2e-11 test id: 612 test name: 79NorthPISMhydrofriction field: Vx2
SUCCESS difference: 9e-12 < 2e-11 test id: 612 test name: 79NorthPISMhydrofriction field: Vx3
SUCCESS difference: 6.7e-12 < 2e-11 test id: 612 test name: 79NorthPISMhydrofriction field: Vy1
SUCCESS difference: 7.5e-12 < 2e-11 test id: 612 test name: 79NorthPISMhydrofriction field: Vy2
SUCCESS difference: 6.9e-12 < 2e-11 test id: 612 test name: 79NorthPISMhydrofriction field: Vy3
SUCCESS difference: 7.2e-12 < 2e-11 test id: 612 test name: 79NorthPISMhydrofriction field: Vel1
SUCCESS difference: 8.1e-12 < 2e-11 test id: 612 test name: 79NorthPISMhydrofriction field: Vel2
SUCCESS difference: 7.5e-12 < 2e-11 test id: 612 test name: 79NorthPISMhydrofriction field: Vel3
----------------finished:612-----------------------
----------------starting:613-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
NOTE: using initial velocities to create constraints along new boundary
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
preparing initial solution
x | Cost function f(x) | List of contributions
====================== step 1/2 ===============================
x = 0 | f(x) = 5.931532e+14 | 5.931532e+14
x = 1 | f(x) = 5.011022e+14 | 5.011022e+14
====================== step 2/2 ===============================
x = 0 | f(x) = 5.011022e+14 | 5.011022e+14
x = 1 | f(x) = 4.265126e+14 | 4.265126e+14
preparing final solution
write lock file:
FemModel initialization elapsed time: 0.006397
Total Core solution elapsed time: 0.068091
Linear solver elapsed time: 0.047594 (70%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 1.7e-13 < 1e-12 test id: 613 test name: 79NorthCMBalThicVxVy field: Gradient1
SUCCESS difference: 7.6e-14 < 1e-12 test id: 613 test name: 79NorthCMBalThicVxVy field: Gradient2
SUCCESS difference: 8.3e-14 < 1e-12 test id: 613 test name: 79NorthCMBalThicVxVy field: Misfits
SUCCESS difference: 3.2e-15 < 1e-12 test id: 613 test name: 79NorthCMBalThicVxVy field: Vx
SUCCESS difference: 1.4e-15 < 1e-12 test id: 613 test name: 79NorthCMBalThicVxVy field: Vy
SUCCESS difference: 8.7e-14 < 1e-12 test id: 613 test name: 79NorthCMBalThicVxVy field: Thickness
----------------finished:613-----------------------
----------------starting:621-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
stochasticforcing.stocahstictimestep not specified: set to md.timestepping.time_step
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test621.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test621 (line 49)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),216,274,362,423,430,433,435,441:442,448,456,462:464,470:476,508,517,544,546,550,808],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 621 test name: 79NorthStochFrictionWaterPressure field: N/A
----------------finished:621-----------------------
----------------starting:622-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
smb.lapserates not specified: set to 0
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test622.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test622 (line 85)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),216,274,362,423,430,433,435,441:442,448,456,462:464,470:476,508,517,544,546,550,808],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 622 test name: 79NorthHydrologyArmapw field: N/A
----------------finished:622-----------------------
----------------starting:701-----------------------
Construction of a mesh from a given geometry
====== Testing MINI Full-Stokes Finite element =====
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
solver residue: norm(KU-F)/norm(F)=1.05176e-16
solver residue: norm(KU-F)/norm(F)=8.83861e-16
solver residue: norm(KU-F)/norm(F)=1.58331e-16
solver residue: norm(KU-F)/norm(F)=4.91648e-15
mechanical equilibrium convergence criterion 100 > 0.01 %
Convergence criterion: norm(du)/norm(u) 7.19835e+23 > 1 %
Convergence criterion: max(du) 8.72588e+06
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=1.39923e-14
mechanical equilibrium convergence criterion 2.12624 > 0.01 %
Convergence criterion: norm(du)/norm(u) 1.10539 > 1 %
Convergence criterion: max(du) 266316
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=2.58268e-14
mechanical equilibrium convergence criterion 1.73917 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.642157 < 1 %
Convergence criterion: max(du) 136471
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=3.1519e-14
mechanical equilibrium convergence criterion 0.717979 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.232724 < 1 %
Convergence criterion: max(du) 79604.1
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=3.90563e-14
mechanical equilibrium convergence criterion 0.432302 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.0930063 < 1 %
Convergence criterion: max(du) 25173.2
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=4.52467e-14
mechanical equilibrium convergence criterion 0.265448 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.0469947 < 1 %
Convergence criterion: max(du) 18682.5
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=4.70116e-14
mechanical equilibrium convergence criterion 0.167098 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.0264618 < 1 %
Convergence criterion: max(du) 12063.6
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=4.93265e-14
mechanical equilibrium convergence criterion 0.106278 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.0150307 < 1 %
Convergence criterion: max(du) 7028.6
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=6.15108e-14
mechanical equilibrium convergence criterion 0.067923 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00855668 < 1 %
Convergence criterion: max(du) 3930.75
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=5.16462e-14
mechanical equilibrium convergence criterion 0.0435415 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00491833 < 1 %
Convergence criterion: max(du) 2178.5
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=4.19411e-14
mechanical equilibrium convergence criterion 0.0279973 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.0028636 < 1 %
Convergence criterion: max(du) 1213.66
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=5.01135e-14
mechanical equilibrium convergence criterion 0.0180659 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00168822 < 1 %
Convergence criterion: max(du) 682.744
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=4.57838e-14
mechanical equilibrium convergence criterion 0.0117016 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00100627 < 1 %
Convergence criterion: max(du) 387.91
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=4.7296e-14
mechanical equilibrium convergence criterion 0.00760798 < 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00060554 < 1 %
Convergence criterion: max(du) 222.316
number of unstable constraints: 0
total number of iterations: 14
write lock file:
FemModel initialization elapsed time: 0.017502
Total Core solution elapsed time: 0.788806
Linear solver elapsed time: 0.660964 (84%)
Total elapsed time: 0 hrs 0 min 0 sec
====== Testing MINIcondensed Full-Stokes Finite element =====
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
solver residue: norm(KU-F)/norm(F)=1.05176e-16
solver residue: norm(KU-F)/norm(F)=8.83861e-16
solver residue: norm(KU-F)/norm(F)=1.58331e-16
solver residue: norm(KU-F)/norm(F)=3.61056e-15
mechanical equilibrium convergence criterion 100 > 0.01 %
Convergence criterion: norm(du)/norm(u) 7.19835e+23 > 1 %
Convergence criterion: max(du) 8.72588e+06
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=1.0611e-14
mechanical equilibrium convergence criterion 1.96276 > 0.01 %
Convergence criterion: norm(du)/norm(u) 1.10539 > 1 %
Convergence criterion: max(du) 266316
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=2.9362e-14
mechanical equilibrium convergence criterion 0.994782 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.642157 < 1 %
Convergence criterion: max(du) 136471
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=3.60978e-14
mechanical equilibrium convergence criterion 0.635413 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.232724 < 1 %
Convergence criterion: max(du) 79604.1
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=6.11757e-14
mechanical equilibrium convergence criterion 0.390791 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.0930063 < 1 %
Convergence criterion: max(du) 25173.2
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=4.16772e-14
mechanical equilibrium convergence criterion 0.243341 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.0469947 < 1 %
Convergence criterion: max(du) 18682.5
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=4.26619e-14
mechanical equilibrium convergence criterion 0.154189 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.0264618 < 1 %
Convergence criterion: max(du) 12063.6
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=4.93175e-14
mechanical equilibrium convergence criterion 0.0983817 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.0150307 < 1 %
Convergence criterion: max(du) 7028.6
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=3.68148e-14
mechanical equilibrium convergence criterion 0.063036 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00855668 < 1 %
Convergence criterion: max(du) 3930.75
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=1.24336e-13
mechanical equilibrium convergence criterion 0.0405301 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00491833 < 1 %
Convergence criterion: max(du) 2178.5
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=6.17774e-14
mechanical equilibrium convergence criterion 0.0261518 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.0028636 < 1 %
Convergence criterion: max(du) 1213.66
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=4.87263e-14
mechanical equilibrium convergence criterion 0.0169366 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00168822 < 1 %
Convergence criterion: max(du) 682.744
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=7.3842e-14
mechanical equilibrium convergence criterion 0.0110089 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00100627 < 1 %
Convergence criterion: max(du) 387.91
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=7.77807e-14
mechanical equilibrium convergence criterion 0.00718082 < 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00060554 < 1 %
Convergence criterion: max(du) 222.316
number of unstable constraints: 0
total number of iterations: 14
write lock file:
FemModel initialization elapsed time: 0.015827
Total Core solution elapsed time: 0.510662
Linear solver elapsed time: 0.354985 (70%)
Total elapsed time: 0 hrs 0 min 0 sec
====== Testing TaylorHood Full-Stokes Finite element =====
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
solver residue: norm(KU-F)/norm(F)=1.05176e-16
solver residue: norm(KU-F)/norm(F)=8.74178e-16
solver residue: norm(KU-F)/norm(F)=1.58331e-16
solver residue: norm(KU-F)/norm(F)=1.07852e-14
mechanical equilibrium convergence criterion 100 > 0.01 %
Convergence criterion: norm(du)/norm(u) 7.20099e+23 > 1 %
Convergence criterion: max(du) 8.74189e+06
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=2.91712e-14
mechanical equilibrium convergence criterion 2.00457 > 0.01 %
Convergence criterion: norm(du)/norm(u) 1.20805 > 1 %
Convergence criterion: max(du) 335077
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=7.3678e-14
mechanical equilibrium convergence criterion 1.78268 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.75602 < 1 %
Convergence criterion: max(du) 132780
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=1.14883e-13
mechanical equilibrium convergence criterion 0.832236 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.263456 < 1 %
Convergence criterion: max(du) 78736.2
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=1.09128e-13
mechanical equilibrium convergence criterion 0.401028 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.0758391 < 1 %
Convergence criterion: max(du) 23665.1
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=1.59184e-13
mechanical equilibrium convergence criterion 0.238045 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.0305218 < 1 %
Convergence criterion: max(du) 10429.3
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=1.36643e-13
mechanical equilibrium convergence criterion 0.150226 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.0152555 < 1 %
Convergence criterion: max(du) 6394.21
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=1.38366e-13
mechanical equilibrium convergence criterion 0.0972593 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00801846 < 1 %
Convergence criterion: max(du) 3530.22
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=2.21266e-13
mechanical equilibrium convergence criterion 0.0640213 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00429142 < 1 %
Convergence criterion: max(du) 1833.16
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=2.18453e-13
mechanical equilibrium convergence criterion 0.0424357 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00234604 < 1 %
Convergence criterion: max(du) 940.664
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=2.31635e-13
mechanical equilibrium convergence criterion 0.028166 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00130469 < 1 %
Convergence criterion: max(du) 481.928
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=1.67556e-13
mechanical equilibrium convergence criterion 0.0186787 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.000736614 < 1 %
Convergence criterion: max(du) 247.852
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=1.97088e-13
mechanical equilibrium convergence criterion 0.0123701 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.000421607 < 1 %
Convergence criterion: max(du) 128.51
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=2.27346e-13
mechanical equilibrium convergence criterion 0.00818204 < 0.01 %
Convergence criterion: norm(du)/norm(u) 0.000244185 < 1 %
Convergence criterion: max(du) 67.3462
number of unstable constraints: 0
total number of iterations: 14
write lock file:
FemModel initialization elapsed time: 0.015879
Total Core solution elapsed time: 1.00578
Linear solver elapsed time: 0.853808 (85%)
Total elapsed time: 0 hrs 0 min 1 sec
====== Testing LATaylorHood Full-Stokes Finite element =====
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
solver residue: norm(KU-F)/norm(F)=1.05176e-16
solver residue: norm(KU-F)/norm(F)=8.74178e-16
solver residue: norm(KU-F)/norm(F)=1.58331e-16
solver residue: norm(KU-F)/norm(F)=1.94637e-13
Convergence criterion: norm(du)/norm(u) inf > 1 %
solver residue: norm(KU-F)/norm(F)=8.2982e-13
Convergence criterion: norm(du)/norm(u) 613.069 > 1 %
solver residue: norm(KU-F)/norm(F)=1.69601e-12
Convergence criterion: norm(du)/norm(u) 275.933 > 1 %
solver residue: norm(KU-F)/norm(F)=3.30045e-12
Convergence criterion: norm(du)/norm(u) 144.079 > 1 %
solver residue: norm(KU-F)/norm(F)=3.97565e-12
Convergence criterion: norm(du)/norm(u) 81.951 > 1 %
solver residue: norm(KU-F)/norm(F)=3.69582e-12
Convergence criterion: norm(du)/norm(u) 49.2493 > 1 %
solver residue: norm(KU-F)/norm(F)=5.5035e-12
Convergence criterion: norm(du)/norm(u) 30.672 > 1 %
solver residue: norm(KU-F)/norm(F)=4.46479e-12
Convergence criterion: norm(du)/norm(u) 19.5516 > 1 %
solver residue: norm(KU-F)/norm(F)=4.30957e-12
Convergence criterion: norm(du)/norm(u) 12.654 > 1 %
solver residue: norm(KU-F)/norm(F)=4.47765e-12
Convergence criterion: norm(du)/norm(u) 8.27209 > 1 %
solver residue: norm(KU-F)/norm(F)=3.44615e-12
Convergence criterion: norm(du)/norm(u) 5.44337 > 1 %
solver residue: norm(KU-F)/norm(F)=4.51203e-12
Convergence criterion: norm(du)/norm(u) 3.59763 > 1 %
solver residue: norm(KU-F)/norm(F)=9.41082e-12
Convergence criterion: norm(du)/norm(u) 2.38464 > 1 %
solver residue: norm(KU-F)/norm(F)=4.80391e-12
Convergence criterion: norm(du)/norm(u) 1.58367 > 1 %
solver residue: norm(KU-F)/norm(F)=5.17346e-12
Convergence criterion: norm(du)/norm(u) 1.05307 > 1 %
solver residue: norm(KU-F)/norm(F)=5.83223e-12
Convergence criterion: norm(du)/norm(u) 0.700842 < 1 %
solver residue: norm(KU-F)/norm(F)=4.52437e-17
Convergence criterion: norm(du)/norm(u) 0.700842 < 1 %
Convergence criterion: norm(dp/)/norm(p) inf > 1 %
solver residue: norm(KU-F)/norm(F)=4.53983e-12
Convergence criterion: norm(du)/norm(u) 0.466658 < 1 %
solver residue: norm(KU-F)/norm(F)=4.5445e-17
Convergence criterion: norm(du)/norm(u) 0.466658 < 1 %
Convergence criterion: norm(dp/)/norm(p) 100.471 > 1 %
solver residue: norm(KU-F)/norm(F)=9.36114e-12
Convergence criterion: norm(du)/norm(u) 0.310831 < 1 %
solver residue: norm(KU-F)/norm(F)=4.53028e-17
Convergence criterion: norm(du)/norm(u) 0.310831 < 1 %
Convergence criterion: norm(dp/)/norm(p) 50.2749 > 1 %
solver residue: norm(KU-F)/norm(F)=4.78926e-12
Convergence criterion: norm(du)/norm(u) 0.207079 < 1 %
solver residue: norm(KU-F)/norm(F)=4.19105e-17
Convergence criterion: norm(du)/norm(u) 0.207079 < 1 %
Convergence criterion: norm(dp/)/norm(p) 33.5252 > 1 %
solver residue: norm(KU-F)/norm(F)=7.77943e-12
Convergence criterion: norm(du)/norm(u) 0.137971 < 1 %
solver residue: norm(KU-F)/norm(F)=4.18522e-17
Convergence criterion: norm(du)/norm(u) 0.137971 < 1 %
Convergence criterion: norm(dp/)/norm(p) 25.1428 > 1 %
solver residue: norm(KU-F)/norm(F)=4.52923e-12
Convergence criterion: norm(du)/norm(u) 0.0919261 < 1 %
solver residue: norm(KU-F)/norm(F)=4.18134e-17
Convergence criterion: norm(du)/norm(u) 0.0919261 < 1 %
Convergence criterion: norm(dp/)/norm(p) 20.1099 > 1 %
solver residue: norm(KU-F)/norm(F)=5.21715e-12
Convergence criterion: norm(du)/norm(u) 0.061242 < 1 %
solver residue: norm(KU-F)/norm(F)=4.17876e-17
Convergence criterion: norm(du)/norm(u) 0.061242 < 1 %
Convergence criterion: norm(dp/)/norm(p) 16.7533 > 1 %
solver residue: norm(KU-F)/norm(F)=5.60321e-12
Convergence criterion: norm(du)/norm(u) 0.0407918 < 1 %
solver residue: norm(KU-F)/norm(F)=4.17704e-17
Convergence criterion: norm(du)/norm(u) 0.0407918 < 1 %
Convergence criterion: norm(dp/)/norm(p) 14.3552 > 1 %
solver residue: norm(KU-F)/norm(F)=5.41451e-12
Convergence criterion: norm(du)/norm(u) 0.0271613 < 1 %
solver residue: norm(KU-F)/norm(F)=4.1759e-17
Convergence criterion: norm(du)/norm(u) 0.0271613 < 1 %
Convergence criterion: norm(dp/)/norm(p) 12.5566 > 1 %
solver residue: norm(KU-F)/norm(F)=5.24331e-12
Convergence criterion: norm(du)/norm(u) 0.0180758 < 1 %
solver residue: norm(KU-F)/norm(F)=4.17513e-17
Convergence criterion: norm(du)/norm(u) 0.0180758 < 1 %
Convergence criterion: norm(dp/)/norm(p) 11.1579 > 1 %
solver residue: norm(KU-F)/norm(F)=4.16559e-12
Convergence criterion: norm(du)/norm(u) 0.0120195 < 1 %
solver residue: norm(KU-F)/norm(F)=4.17463e-17
Convergence criterion: norm(du)/norm(u) 0.0120195 < 1 %
Convergence criterion: norm(dp/)/norm(p) 10.0391 > 1 %
solver residue: norm(KU-F)/norm(F)=3.35583e-12
Convergence criterion: norm(du)/norm(u) 0.0079825 < 1 %
solver residue: norm(KU-F)/norm(F)=4.17429e-17
Convergence criterion: norm(du)/norm(u) 0.0079825 < 1 %
Convergence criterion: norm(dp/)/norm(p) 9.12391 > 1 %
solver residue: norm(KU-F)/norm(F)=5.02864e-12
Convergence criterion: norm(du)/norm(u) 0.0052914 < 1 %
solver residue: norm(KU-F)/norm(F)=4.17407e-17
Convergence criterion: norm(du)/norm(u) 0.0052914 < 1 %
Convergence criterion: norm(dp/)/norm(p) 8.3615 > 1 %
solver residue: norm(KU-F)/norm(F)=6.01504e-12
Convergence criterion: norm(du)/norm(u) 0.00349749 < 1 %
solver residue: norm(KU-F)/norm(F)=4.17392e-17
Convergence criterion: norm(du)/norm(u) 0.00349749 < 1 %
Convergence criterion: norm(dp/)/norm(p) 7.71658 > 1 %
solver residue: norm(KU-F)/norm(F)=7.97047e-12
Convergence criterion: norm(du)/norm(u) 0.00230166 < 1 %
solver residue: norm(KU-F)/norm(F)=4.17383e-17
Convergence criterion: norm(du)/norm(u) 0.00230166 < 1 %
Convergence criterion: norm(dp/)/norm(p) 7.16394 > 1 %
solver residue: norm(KU-F)/norm(F)=6.3165e-12
Convergence criterion: norm(du)/norm(u) 0.00150451 < 1 %
solver residue: norm(KU-F)/norm(F)=4.17376e-17
Convergence criterion: norm(du)/norm(u) 0.00150451 < 1 %
Convergence criterion: norm(dp/)/norm(p) 6.68513 > 1 %
solver residue: norm(KU-F)/norm(F)=4.57259e-12
Convergence criterion: norm(du)/norm(u) 0.00097312 < 1 %
solver residue: norm(KU-F)/norm(F)=4.17372e-17
Convergence criterion: norm(du)/norm(u) 0.00097312 < 1 %
Convergence criterion: norm(dp/)/norm(p) 6.26629 > 1 %
solver residue: norm(KU-F)/norm(F)=6.15642e-12
Convergence criterion: norm(du)/norm(u) 0.000618904 < 1 %
solver residue: norm(KU-F)/norm(F)=4.1737e-17
Convergence criterion: norm(du)/norm(u) 0.000618904 < 1 %
Convergence criterion: norm(dp/)/norm(p) 5.89681 > 1 %
solver residue: norm(KU-F)/norm(F)=8.6374e-12
Convergence criterion: norm(du)/norm(u) 0.00038279 < 1 %
solver residue: norm(KU-F)/norm(F)=4.17368e-17
Convergence criterion: norm(du)/norm(u) 0.00038279 < 1 %
Convergence criterion: norm(dp/)/norm(p) 5.56847 > 1 %
solver residue: norm(KU-F)/norm(F)=5.50578e-12
Convergence criterion: norm(du)/norm(u) 0.000225428 < 1 %
solver residue: norm(KU-F)/norm(F)=4.17367e-17
Convergence criterion: norm(du)/norm(u) 0.000225428 < 1 %
Convergence criterion: norm(dp/)/norm(p) 5.27476 > 1 %
maximum number of nonlinear iterations (20) exceeded
total number of iterations: 19
write lock file:
FemModel initialization elapsed time: 0.01404
Total Core solution elapsed time: 2.38451
Linear solver elapsed time: 1.85158 (78%)
Total elapsed time: 0 hrs 0 min 2 sec
====== Testing CrouzeixRaviart Full-Stokes Finite element =====
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
solver residue: norm(KU-F)/norm(F)=1.05176e-16
solver residue: norm(KU-F)/norm(F)=8.74178e-16
solver residue: norm(KU-F)/norm(F)=1.58331e-16
solver residue: norm(KU-F)/norm(F)=3.36619e-13
mechanical equilibrium convergence criterion 100 > 0.01 %
Convergence criterion: norm(du)/norm(u) 1.63969e+24 > 1 %
Convergence criterion: max(du) 8.83861e+06
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=2.78566e-13
mechanical equilibrium convergence criterion 2.11064 > 0.01 %
Convergence criterion: norm(du)/norm(u) 1.08444 > 1 %
Convergence criterion: max(du) 446853
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=5.59151e-13
mechanical equilibrium convergence criterion 2.09404 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.862624 < 1 %
Convergence criterion: max(du) 414759
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=7.03468e-13
mechanical equilibrium convergence criterion 0.909059 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.341995 < 1 %
Convergence criterion: max(du) 161809
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=8.55853e-13
mechanical equilibrium convergence criterion 0.479574 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.131721 < 1 %
Convergence criterion: max(du) 90123.3
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=5.88486e-13
mechanical equilibrium convergence criterion 0.284195 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.0670162 < 1 %
Convergence criterion: max(du) 54409.5
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=1.01184e-12
mechanical equilibrium convergence criterion 0.175223 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.0291123 < 1 %
Convergence criterion: max(du) 25524.6
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=7.38925e-13
mechanical equilibrium convergence criterion 0.113576 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.0147368 < 1 %
Convergence criterion: max(du) 11821.9
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=8.29837e-13
mechanical equilibrium convergence criterion 0.0746106 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00819942 < 1 %
Convergence criterion: max(du) 6242.62
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=1.01503e-12
mechanical equilibrium convergence criterion 0.0495047 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00471128 < 1 %
Convergence criterion: max(du) 3515.55
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=1.06256e-12
mechanical equilibrium convergence criterion 0.0329431 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00276078 < 1 %
Convergence criterion: max(du) 2073.3
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=8.05264e-13
mechanical equilibrium convergence criterion 0.0218954 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00164519 < 1 %
Convergence criterion: max(du) 1261.94
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=9.54754e-13
mechanical equilibrium convergence criterion 0.0145181 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.000994648 < 1 %
Convergence criterion: max(du) 783.637
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=1.04112e-12
mechanical equilibrium convergence criterion 0.00960519 < 0.01 %
Convergence criterion: norm(du)/norm(u) 0.000608466 < 1 %
Convergence criterion: max(du) 492.666
number of unstable constraints: 0
total number of iterations: 14
write lock file:
FemModel initialization elapsed time: 0.013916
Total Core solution elapsed time: 1.48862
Linear solver elapsed time: 1.32942 (89%)
Total elapsed time: 0 hrs 0 min 1 sec
====== Testing LACrouzeixRaviart Full-Stokes Finite element =====
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
solver residue: norm(KU-F)/norm(F)=1.05176e-16
solver residue: norm(KU-F)/norm(F)=8.83861e-16
solver residue: norm(KU-F)/norm(F)=1.58331e-16
solver residue: norm(KU-F)/norm(F)=2.21813e-13
Convergence criterion: norm(du)/norm(u) inf > 1 %
solver residue: norm(KU-F)/norm(F)=9.94688e-13
Convergence criterion: norm(du)/norm(u) 613.091 > 1 %
solver residue: norm(KU-F)/norm(F)=1.60876e-12
Convergence criterion: norm(du)/norm(u) 275.944 > 1 %
solver residue: norm(KU-F)/norm(F)=2.44192e-12
Convergence criterion: norm(du)/norm(u) 144.085 > 1 %
solver residue: norm(KU-F)/norm(F)=3.5164e-12
Convergence criterion: norm(du)/norm(u) 81.9547 > 1 %
solver residue: norm(KU-F)/norm(F)=4.10746e-12
Convergence criterion: norm(du)/norm(u) 49.2514 > 1 %
solver residue: norm(KU-F)/norm(F)=6.40552e-12
Convergence criterion: norm(du)/norm(u) 30.6732 > 1 %
solver residue: norm(KU-F)/norm(F)=5.90037e-12
Convergence criterion: norm(du)/norm(u) 19.5522 > 1 %
solver residue: norm(KU-F)/norm(F)=5.29713e-12
Convergence criterion: norm(du)/norm(u) 12.6543 > 1 %
solver residue: norm(KU-F)/norm(F)=5.53146e-12
Convergence criterion: norm(du)/norm(u) 8.27219 > 1 %
solver residue: norm(KU-F)/norm(F)=6.02645e-12
Convergence criterion: norm(du)/norm(u) 5.44338 > 1 %
solver residue: norm(KU-F)/norm(F)=7.70017e-12
Convergence criterion: norm(du)/norm(u) 3.5976 > 1 %
solver residue: norm(KU-F)/norm(F)=6.14994e-12
Convergence criterion: norm(du)/norm(u) 2.3846 > 1 %
solver residue: norm(KU-F)/norm(F)=6.30753e-12
Convergence criterion: norm(du)/norm(u) 1.58362 > 1 %
solver residue: norm(KU-F)/norm(F)=6.47699e-12
Convergence criterion: norm(du)/norm(u) 1.05304 > 1 %
solver residue: norm(KU-F)/norm(F)=4.17805e-12
Convergence criterion: norm(du)/norm(u) 0.700815 < 1 %
solver residue: norm(KU-F)/norm(F)=1.28233e-16
Convergence criterion: norm(du)/norm(u) 0.700815 < 1 %
Convergence criterion: norm(dp/)/norm(p) inf > 1 %
solver residue: norm(KU-F)/norm(F)=6.82034e-12
Convergence criterion: norm(du)/norm(u) 0.466662 < 1 %
solver residue: norm(KU-F)/norm(F)=1.27281e-16
Convergence criterion: norm(du)/norm(u) 0.466662 < 1 %
Convergence criterion: norm(dp/)/norm(p) 100.469 > 1 %
solver residue: norm(KU-F)/norm(F)=5.49175e-12
Convergence criterion: norm(du)/norm(u) 0.310857 < 1 %
solver residue: norm(KU-F)/norm(F)=1.33596e-16
Convergence criterion: norm(du)/norm(u) 0.310857 < 1 %
Convergence criterion: norm(dp/)/norm(p) 50.2738 > 1 %
solver residue: norm(KU-F)/norm(F)=6.77828e-12
Convergence criterion: norm(du)/norm(u) 0.207121 < 1 %
solver residue: norm(KU-F)/norm(F)=1.22565e-16
Convergence criterion: norm(du)/norm(u) 0.207121 < 1 %
Convergence criterion: norm(dp/)/norm(p) 33.5245 > 1 %
solver residue: norm(KU-F)/norm(F)=5.87361e-12
Convergence criterion: norm(du)/norm(u) 0.138023 < 1 %
solver residue: norm(KU-F)/norm(F)=1.2722e-16
Convergence criterion: norm(du)/norm(u) 0.138023 < 1 %
Convergence criterion: norm(dp/)/norm(p) 25.1422 > 1 %
solver residue: norm(KU-F)/norm(F)=5.17686e-12
Convergence criterion: norm(du)/norm(u) 0.0919849 < 1 %
solver residue: norm(KU-F)/norm(F)=1.26949e-16
Convergence criterion: norm(du)/norm(u) 0.0919849 < 1 %
Convergence criterion: norm(dp/)/norm(p) 20.1095 > 1 %
solver residue: norm(KU-F)/norm(F)=5.85405e-12
Convergence criterion: norm(du)/norm(u) 0.0613056 < 1 %
solver residue: norm(KU-F)/norm(F)=1.26753e-16
Convergence criterion: norm(du)/norm(u) 0.0613056 < 1 %
Convergence criterion: norm(dp/)/norm(p) 16.753 > 1 %
solver residue: norm(KU-F)/norm(F)=5.3905e-12
Convergence criterion: norm(du)/norm(u) 0.0408587 < 1 %
solver residue: norm(KU-F)/norm(F)=1.31041e-16
Convergence criterion: norm(du)/norm(u) 0.0408587 < 1 %
Convergence criterion: norm(dp/)/norm(p) 14.355 > 1 %
solver residue: norm(KU-F)/norm(F)=6.66868e-12
Convergence criterion: norm(du)/norm(u) 0.0272303 < 1 %
solver residue: norm(KU-F)/norm(F)=1.29362e-16
Convergence criterion: norm(du)/norm(u) 0.0272303 < 1 %
Convergence criterion: norm(dp/)/norm(p) 12.5564 > 1 %
solver residue: norm(KU-F)/norm(F)=6.55931e-12
Convergence criterion: norm(du)/norm(u) 0.0181463 < 1 %
solver residue: norm(KU-F)/norm(F)=1.28963e-16
Convergence criterion: norm(du)/norm(u) 0.0181463 < 1 %
Convergence criterion: norm(dp/)/norm(p) 11.1577 > 1 %
solver residue: norm(KU-F)/norm(F)=6.06804e-12
Convergence criterion: norm(du)/norm(u) 0.012091 < 1 %
solver residue: norm(KU-F)/norm(F)=1.36957e-16
Convergence criterion: norm(du)/norm(u) 0.012091 < 1 %
Convergence criterion: norm(dp/)/norm(p) 10.0389 > 1 %
solver residue: norm(KU-F)/norm(F)=5.08984e-12
Convergence criterion: norm(du)/norm(u) 0.00805457 < 1 %
solver residue: norm(KU-F)/norm(F)=1.29653e-16
Convergence criterion: norm(du)/norm(u) 0.00805457 < 1 %
Convergence criterion: norm(dp/)/norm(p) 9.12383 > 1 %
solver residue: norm(KU-F)/norm(F)=6.20133e-12
Convergence criterion: norm(du)/norm(u) 0.0053639 < 1 %
solver residue: norm(KU-F)/norm(F)=1.28409e-16
Convergence criterion: norm(du)/norm(u) 0.0053639 < 1 %
Convergence criterion: norm(dp/)/norm(p) 8.36143 > 1 %
solver residue: norm(KU-F)/norm(F)=5.36606e-12
Convergence criterion: norm(du)/norm(u) 0.00357027 < 1 %
solver residue: norm(KU-F)/norm(F)=1.35629e-16
Convergence criterion: norm(du)/norm(u) 0.00357027 < 1 %
Convergence criterion: norm(dp/)/norm(p) 7.71652 > 1 %
solver residue: norm(KU-F)/norm(F)=7.02216e-12
Convergence criterion: norm(du)/norm(u) 0.00237462 < 1 %
solver residue: norm(KU-F)/norm(F)=1.24849e-16
Convergence criterion: norm(du)/norm(u) 0.00237462 < 1 %
Convergence criterion: norm(dp/)/norm(p) 7.1639 > 1 %
solver residue: norm(KU-F)/norm(F)=4.47613e-12
Convergence criterion: norm(du)/norm(u) 0.00157759 < 1 %
solver residue: norm(KU-F)/norm(F)=1.31059e-16
Convergence criterion: norm(du)/norm(u) 0.00157759 < 1 %
Convergence criterion: norm(dp/)/norm(p) 6.6851 > 1 %
solver residue: norm(KU-F)/norm(F)=5.00969e-12
Convergence criterion: norm(du)/norm(u) 0.00104627 < 1 %
solver residue: norm(KU-F)/norm(F)=1.31766e-16
Convergence criterion: norm(du)/norm(u) 0.00104627 < 1 %
Convergence criterion: norm(dp/)/norm(p) 6.26627 > 1 %
solver residue: norm(KU-F)/norm(F)=1.08164e-11
Convergence criterion: norm(du)/norm(u) 0.000692086 < 1 %
solver residue: norm(KU-F)/norm(F)=1.2767e-16
Convergence criterion: norm(du)/norm(u) 0.000692086 < 1 %
Convergence criterion: norm(dp/)/norm(p) 5.8968 > 1 %
solver residue: norm(KU-F)/norm(F)=4.94485e-12
Convergence criterion: norm(du)/norm(u) 0.000455984 < 1 %
solver residue: norm(KU-F)/norm(F)=1.30442e-16
Convergence criterion: norm(du)/norm(u) 0.000455984 < 1 %
Convergence criterion: norm(dp/)/norm(p) 5.56847 > 1 %
solver residue: norm(KU-F)/norm(F)=6.24767e-12
Convergence criterion: norm(du)/norm(u) 0.000298597 < 1 %
solver residue: norm(KU-F)/norm(F)=1.23939e-16
Convergence criterion: norm(du)/norm(u) 0.000298597 < 1 %
Convergence criterion: norm(dp/)/norm(p) 5.27476 > 1 %
maximum number of nonlinear iterations (20) exceeded
total number of iterations: 19
write lock file:
FemModel initialization elapsed time: 0.013333
Total Core solution elapsed time: 3.87836
Linear solver elapsed time: 3.28873 (85%)
Total elapsed time: 0 hrs 0 min 3 sec
SUCCESS difference: 1.3e-12 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VxMINI
SUCCESS difference: 1.8e-12 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VyMINI
SUCCESS difference: 1.7e-12 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VelMINI
SUCCESS difference: 7.1e-13 < 1e-10 test id: 701 test name: FlowbandFSshelf field: PressureMINI
SUCCESS difference: 3.5e-12 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VxMINIcondensed
SUCCESS difference: 4.2e-12 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VyMINIcondensed
SUCCESS difference: 4.2e-12 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VelMINIcondensed
SUCCESS difference: 4.9e-13 < 1e-10 test id: 701 test name: FlowbandFSshelf field: PressureMINIcondensed
SUCCESS difference: 1.1e-11 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VxTaylorHood
SUCCESS difference: 1.3e-11 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VyTaylorHood
SUCCESS difference: 1.3e-11 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VelTaylorHood
SUCCESS difference: 7.5e-13 < 1e-10 test id: 701 test name: FlowbandFSshelf field: PressureTaylorHood
SUCCESS difference: 1.6e-11 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VxLATaylorHood
SUCCESS difference: 2.2e-11 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VyLATaylorHood
SUCCESS difference: 2.2e-11 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VelLATaylorHood
SUCCESS difference: 5.4e-12 < 1e-10 test id: 701 test name: FlowbandFSshelf field: PressureLATaylorHood
SUCCESS difference: 8.1e-12 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VxCrouzeixRaviart
SUCCESS difference: 8.2e-12 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VyCrouzeixRaviart
SUCCESS difference: 8.1e-12 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VelCrouzeixRaviart
SUCCESS difference: 4.5e-12 < 1e-10 test id: 701 test name: FlowbandFSshelf field: PressureCrouzeixRaviart
SUCCESS difference: 3.8e-12 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VxLACrouzeixRaviart
SUCCESS difference: 2.4e-12 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VyLACrouzeixRaviart
SUCCESS difference: 2.4e-12 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VelLACrouzeixRaviart
SUCCESS difference: 4.7e-12 < 1e-10 test id: 701 test name: FlowbandFSshelf field: PressureLACrouzeixRaviart
----------------finished:701-----------------------
----------------starting:702-----------------------
Construction of a mesh from a given geometry
====== Testing MINI Full-Stokes Finite element =====
checking model consistency
marshalling file /Users/jenkins/workspace/macOS-Silicon-Basic//execution/test702-06-30-2026-05-11-56-83280/test702.bin
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
call computational core:
computing new velocity
computing surface slopes
extruding SurfaceSlopeX from base...
computing bed slopes
computing basal mass balance
maximum number of nonlinear iterations (20) exceeded
write lock file:
FemModel initialization elapsed time: 0.009899
Total Core solution elapsed time: 1.19303
Linear solver elapsed time: 0.986412 (83%)
Total elapsed time: 0 hrs 0 min 1 sec
loading results from cluster
====== Testing MINIcondensed Full-Stokes Finite element =====
checking model consistency
marshalling file /Users/jenkins/workspace/macOS-Silicon-Basic//execution/test702-06-30-2026-05-11-58-83280/test702.bin
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
call computational core:
computing new velocity
computing surface slopes
extruding SurfaceSlopeX from base...
computing bed slopes
computing basal mass balance
maximum number of nonlinear iterations (20) exceeded
write lock file:
FemModel initialization elapsed time: 0.00961
Total Core solution elapsed time: 0.723482
Linear solver elapsed time: 0.531045 (73%)
Total elapsed time: 0 hrs 0 min 0 sec
loading results from cluster
====== Testing TaylorHood Full-Stokes Finite element =====
checking model consistency
marshalling file /Users/jenkins/workspace/macOS-Silicon-Basic//execution/test702-06-30-2026-05-11-59-83280/test702.bin
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
call computational core:
computing new velocity
computing surface slopes
extruding SurfaceSlopeX from base...
computing bed slopes
computing basal mass balance
write lock file:
FemModel initialization elapsed time: 0.011061
Total Core solution elapsed time: 1.41821
Linear solver elapsed time: 1.19988 (85%)
Total elapsed time: 0 hrs 0 min 1 sec
loading results from cluster
====== Testing XTaylorHood Full-Stokes Finite element =====
checking model consistency
marshalling file /Users/jenkins/workspace/macOS-Silicon-Basic//execution/test702-06-30-2026-05-12-01-83280/test702.bin
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
call computational core:
computing new velocity
computing surface slopes
extruding SurfaceSlopeX from base...
computing bed slopes
computing basal mass balance
write lock file:
FemModel initialization elapsed time: 0.015366
Total Core solution elapsed time: 0.309527
Linear solver elapsed time: 0.254792 (82%)
Total elapsed time: 0 hrs 0 min 0 sec
loading results from cluster
====== Testing LATaylorHood Full-Stokes Finite element =====
checking model consistency
marshalling file /Users/jenkins/workspace/macOS-Silicon-Basic//execution/test702-06-30-2026-05-12-01-83280/test702.bin
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
call computational core:
computing new velocity
computing surface slopes
extruding SurfaceSlopeX from base...
computing bed slopes
computing basal mass balance
write lock file:
FemModel initialization elapsed time: 0.016219
Total Core solution elapsed time: 1.21621
Linear solver elapsed time: 1.00153 (82%)
Total elapsed time: 0 hrs 0 min 1 sec
loading results from cluster
SUCCESS difference: 2.6e-09 < 8e-05 test id: 702 test name: FlowbandFSsheetshelf field: VxMINI
SUCCESS difference: 2.5e-09 < 8e-05 test id: 702 test name: FlowbandFSsheetshelf field: VyMINI
SUCCESS difference: 2.5e-09 < 8e-05 test id: 702 test name: FlowbandFSsheetshelf field: VelMINI
SUCCESS difference: 1.1e-10 < 1e-08 test id: 702 test name: FlowbandFSsheetshelf field: PressureMINI
SUCCESS difference: 9.5e-11 < 8e-05 test id: 702 test name: FlowbandFSsheetshelf field: VxMINIcondensed
SUCCESS difference: 5.7e-11 < 8e-05 test id: 702 test name: FlowbandFSsheetshelf field: VyMINIcondensed
SUCCESS difference: 5.7e-11 < 8e-05 test id: 702 test name: FlowbandFSsheetshelf field: VelMINIcondensed
SUCCESS difference: 4.4e-10 < 1e-08 test id: 702 test name: FlowbandFSsheetshelf field: PressureMINIcondensed
SUCCESS difference: 4.6e-09 < 8e-05 test id: 702 test name: FlowbandFSsheetshelf field: VxTaylorHood
SUCCESS difference: 4.4e-09 < 8e-05 test id: 702 test name: FlowbandFSsheetshelf field: VyTaylorHood
SUCCESS difference: 4.4e-09 < 8e-05 test id: 702 test name: FlowbandFSsheetshelf field: VelTaylorHood
SUCCESS difference: 2.5e-10 < 1e-08 test id: 702 test name: FlowbandFSsheetshelf field: PressureTaylorHood
SUCCESS difference: 8e-10 < 8e-05 test id: 702 test name: FlowbandFSsheetshelf field: VxXTaylorHood
SUCCESS difference: 3.8e-09 < 8e-05 test id: 702 test name: FlowbandFSsheetshelf field: VyXTaylorHood
SUCCESS difference: 3.8e-09 < 8e-05 test id: 702 test name: FlowbandFSsheetshelf field: VelXTaylorHood
SUCCESS difference: 8.3e-14 < 1e-08 test id: 702 test name: FlowbandFSsheetshelf field: PressureXTaylorHood
SUCCESS difference: 5.8e-09 < 8e-05 test id: 702 test name: FlowbandFSsheetshelf field: VxLATaylorHood
SUCCESS difference: 5.6e-09 < 8e-05 test id: 702 test name: FlowbandFSsheetshelf field: VyLATaylorHood
SUCCESS difference: 5.6e-09 < 8e-05 test id: 702 test name: FlowbandFSsheetshelf field: VelLATaylorHood
SUCCESS difference: 1.1e-11 < 1e-08 test id: 702 test name: FlowbandFSsheetshelf field: PressureLATaylorHood
----------------finished:702-----------------------
----------------starting:703-----------------------
Construction of a mesh from a given geometry
checking model consistency
marshalling file /Users/jenkins/workspace/macOS-Silicon-Basic//execution/test703-06-30-2026-05-12-03-83280/test703.bin
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
call computational core:
iteration 1/6 time [yr]: 0.00 (time step: 0.00)
computing smb
computing new velocity
computing surface slopes
extruding SurfaceSlopeX from base...
computing bed slopes
computing basal mass balance
computing basal mass balance
computing mass transport
call free surface computational core
extruding Base from base...
extruding solution from top...
extruding solution from top...
extruding solution from top...
updating vertices positions
saving temporary results
iteration 2/6 time [yr]: 0.00 (time step: 0.00)
computing smb
computing new velocity
computing surface slopes
extruding SurfaceSlopeX from base...
computing bed slopes
computing basal mass balance
computing basal mass balance
computing mass transport
call free surface computational core
extruding Base from base...
extruding solution from top...
extruding solution from top...
extruding solution from top...
updating vertices positions
saving temporary results
iteration 3/6 time [yr]: 0.00 (time step: 0.00)
computing smb
computing new velocity
computing surface slopes
extruding SurfaceSlopeX from base...
computing bed slopes
computing basal mass balance
computing basal mass balance
computing mass transport
call free surface computational core
extruding Base from base...
extruding solution from top...
extruding solution from top...
extruding solution from top...
updating vertices positions
saving temporary results
iteration 4/6 time [yr]: 0.00 (time step: 0.00)
computing smb
computing new velocity
computing surface slopes
extruding SurfaceSlopeX from base...
computing bed slopes
computing basal mass balance
computing basal mass balance
computing mass transport
call free surface computational core
extruding Base from base...
extruding solution from top...
extruding solution from top...
extruding solution from top...
updating vertices positions
saving temporary results
iteration 5/6 time [yr]: 0.00 (time step: 0.00)
computing smb
computing new velocity
computing surface slopes
extruding SurfaceSlopeX from base...
computing bed slopes
computing basal mass balance
computing basal mass balance
computing mass transport
call free surface computational core
extruding Base from base...
extruding solution from top...
extruding solution from top...
extruding solution from top...
updating vertices positions
saving temporary results
write lock file:
FemModel initialization elapsed time: 0.020838
Total Core solution elapsed time: 4.51151
Linear solver elapsed time: 3.8201 (85%)
Total elapsed time: 0 hrs 0 min 4 sec
loading results from cluster
checking model consistency
marshalling file /Users/jenkins/workspace/macOS-Silicon-Basic//execution/test703-06-30-2026-05-12-08-83280/test703.bin
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
call computational core:
iteration 1/6 time [yr]: 0.00 (time step: 0.00)
computing smb
computing new velocity
computing surface slopes
extruding SurfaceSlopeX from base...
computing bed slopes
computing basal mass balance
computing basal mass balance
computing mass transport
call free surface computational core
extruding Base from base...
extruding solution from top...
extruding solution from top...
extruding solution from top...
updating vertices positions
saving temporary results
iteration 2/6 time [yr]: 0.00 (time step: 0.00)
computing smb
computing new velocity
computing surface slopes
extruding SurfaceSlopeX from base...
computing bed slopes
computing basal mass balance
computing basal mass balance
computing mass transport
call free surface computational core
extruding Base from base...
extruding solution from top...
extruding solution from top...
extruding solution from top...
updating vertices positions
saving temporary results
iteration 3/6 time [yr]: 0.00 (time step: 0.00)
computing smb
computing new velocity
computing surface slopes
extruding SurfaceSlopeX from base...
computing bed slopes
computing basal mass balance
computing basal mass balance
computing mass transport
call free surface computational core
extruding Base from base...
extruding solution from top...
extruding solution from top...
extruding solution from top...
updating vertices positions
saving temporary results
iteration 4/6 time [yr]: 0.00 (time step: 0.00)
computing smb
computing new velocity
computing surface slopes
extruding SurfaceSlopeX from base...
computing bed slopes
computing basal mass balance
computing basal mass balance
computing mass transport
call free surface computational core
extruding Base from base...
extruding solution from top...
extruding solution from top...
extruding solution from top...
updating vertices positions
saving temporary results
iteration 5/6 time [yr]: 0.00 (time step: 0.00)
computing smb
computing new velocity
computing surface slopes
extruding SurfaceSlopeX from base...
computing bed slopes
computing basal mass balance
computing basal mass balance
computing mass transport
call free surface computational core
extruding Base from base...
extruding solution from top...
extruding solution from top...
extruding solution from top...
updating vertices positions
saving temporary results
write lock file:
FemModel initialization elapsed time: 0.023032
Total Core solution elapsed time: 4.89542
Linear solver elapsed time: 4.16782 (85%)
Total elapsed time: 0 hrs 0 min 4 sec
loading results from cluster
SUCCESS difference: 3e-09 < 2e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vx1
SUCCESS difference: 2.9e-09 < 2e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vy1
SUCCESS difference: 2.9e-09 < 2e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vel1
SUCCESS difference: 9e-10 < 1e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Pressure1
SUCCESS difference: 4.2e-12 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Bed1
SUCCESS difference: 9.3e-12 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Surface1
SUCCESS difference: 1.5e-14 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Thickness1
SUCCESS difference: 7.6e-10 < 2e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vx2
SUCCESS difference: 8.3e-10 < 2e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vy2
SUCCESS difference: 8.3e-10 < 2e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vel2
SUCCESS difference: 5.6e-10 < 1e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Pressure2
SUCCESS difference: 5.1e-12 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Bed2
SUCCESS difference: 1.1e-11 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Surface2
SUCCESS difference: 2.1e-14 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Thickness2
SUCCESS difference: 2.5e-09 < 2e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vx3
SUCCESS difference: 2.7e-09 < 2e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vy3
SUCCESS difference: 2.7e-09 < 2e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vel3
SUCCESS difference: 8.3e-10 < 1e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Pressure3
SUCCESS difference: 2.9e-12 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Bed3
SUCCESS difference: 6.3e-12 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Surface3
SUCCESS difference: 1.4e-14 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Thickness3
SUCCESS difference: 5.4e-09 < 5e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vx1_damp
SUCCESS difference: 5.3e-09 < 5e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vy1_damp
SUCCESS difference: 5.3e-09 < 5e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vel1_damp
SUCCESS difference: 2.1e-09 < 1e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Pressure1_damp
SUCCESS difference: 6.1e-12 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Bed1_damp
SUCCESS difference: 1.3e-11 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Surface1_damp
SUCCESS difference: 2.1e-14 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Thickness1_damp
SUCCESS difference: 2.3e-09 < 5e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vx2_damp
SUCCESS difference: 2.3e-09 < 5e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vy2_damp
SUCCESS difference: 2.3e-09 < 5e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vel2_damp
SUCCESS difference: 7.3e-10 < 1e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Pressure2_damp
SUCCESS difference: 8.3e-12 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Bed2_damp
SUCCESS difference: 1.8e-11 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Surface2_damp
SUCCESS difference: 2.6e-14 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Thickness2_damp
SUCCESS difference: 8.5e-10 < 5e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vx3_damp
SUCCESS difference: 8.9e-10 < 5e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vy3_damp
SUCCESS difference: 8.9e-10 < 5e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Vel3_damp
SUCCESS difference: 3.2e-10 < 1e-08 test id: 703 test name: FlowbandFSsheetshelfTrans field: Pressure3_damp
SUCCESS difference: 9e-12 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Bed3_damp
SUCCESS difference: 2e-11 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Surface3_damp
SUCCESS difference: 2.8e-14 < 1e-10 test id: 703 test name: FlowbandFSsheetshelfTrans field: Thickness3_damp
----------------finished:703-----------------------
----------------starting:801-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test801.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test801 (line 17)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),216,274,362,423,430,433,435,441:442,448,456,462:464,470:476,508,517,544,546,550,808],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 801 test name: ValleyGlacierLevelsetSSA2d field: N/A
----------------finished:801-----------------------
----------------starting:802-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test802.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test802 (line 22)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),216,274,362,423,430,433,435,441:442,448,456,462:464,470:476,508,517,544,546,550,808],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 802 test name: ValleyGlacierLevelsetThermalSSA3d field: N/A
----------------finished:802-----------------------
----------------starting:803-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test803.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test803 (line 24)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),216,274,362,423,430,433,435,441:442,448,456,462:464,470:476,508,517,544,546,550,808],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 803 test name: ValleyGlacierLevelsetEnthalpyHO3d field: N/A
----------------finished:803-----------------------
----------------starting:804-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test804.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test804 (line 20)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),216,274,362,423,430,433,435,441:442,448,456,462:464,470:476,508,517,544,546,550,808],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 804 test name: ValleyGlacierLevelsetCalvingSIA2d field: N/A
----------------finished:804-----------------------
----------------starting:805-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test805.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test805 (line 29)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),216,274,362,423,430,433,435,441:442,448,456,462:464,470:476,508,517,544,546,550,808],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 805 test name: ValleyGlacierLevelsetEnthCalvingHO3d field: N/A
----------------finished:805-----------------------
----------------starting:806-----------------------
boundary conditions for stressbalance model: spc set as zero
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test806.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test806 (line 37)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),216,274,362,423,430,433,435,441:442,448,456,462:464,470:476,508,517,544,546,550,808],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 806 test name: SquareShelfLevelsetCalvingSSA2dLevermann field: N/A
----------------finished:806-----------------------
----------------starting:807-----------------------
boundary conditions for stressbalance model: spc set as zero
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test807.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test807 (line 33)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),216,274,362,423,430,433,435,441:442,448,456,462:464,470:476,508,517,544,546,550,808],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 807 test name: SquareShelfLevelsetMeltingSSA2d field: N/A
----------------finished:807-----------------------
----------------starting:809-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Found 0 to flip
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test809.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test809 (line 26)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),216,274,362,423,430,433,435,441:442,448,456,462:464,470:476,508,517,544,546,550,808],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 809 test name: ValleyGlacierLevelsetCalvingSSA2dCrevassedepth field: N/A
----------------finished:809-----------------------
----------------starting:810-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test810.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test810 (line 18)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),216,274,362,423,430,433,435,441:442,448,456,462:464,470:476,508,517,544,546,550,808],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 810 test name: ValleyGlacierLevelsetMOLHO2d field: N/A
----------------finished:810-----------------------
----------------starting:811-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test811.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test811 (line 21)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),216,274,362,423,430,433,435,441:442,448,456,462:464,470:476,508,517,544,546,550,808],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 811 test name: ValleyGlacierLevelsetCalvingMOLHO2d field: N/A
----------------finished:811-----------------------
----------------starting:812-----------------------
boundary conditions for stressbalance model: spc set as zero
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test812.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test812 (line 38)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),216,274,362,423,430,433,435,441:442,448,456,462:464,470:476,508,517,544,546,550,808],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 812 test name: SquareShelfLevelsetCalvingMOLHO2dLevermann field: N/A
----------------finished:812-----------------------
----------------starting:813-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test813.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test813 (line 44)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),216,274,362,423,430,433,435,441:442,448,456,462:464,470:476,508,517,544,546,550,808],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 813 test name: SquareShelfLevelsetKillberg field: N/A
----------------finished:813-----------------------
----------------starting:814-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Found 38 to flip
Found 44 to flip
Found 51 to flip
Found 53 to flip
Found 47 to flip
Found 46 to flip
Found 41 to flip
Found 34 to flip
Found 30 to flip
Found 21 to flip
Found 15 to flip
Found 2 to flip
Found 0 to flip
[0] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[0] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[1] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[1] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
[2] ??? Error using ==> ./analyses/MasstransportAnalysis.cpp:720
[2] CreatePVectorCG error message: Assertion "connectedtoocean_input" failed, please report bug at https://github.com/ISSMteam/ISSM/
Error using loadresultsfromdisk
=========================================================================
Binary file test814.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 48)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 210)
md=loadresultsfromcluster(md);
Error in test814 (line 27)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 159)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),216,274,362,423,430,433,435,441:442,448,456,462:464,470:476,508,517,544,546,550,808],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 814 test name: SSA2dCDCalvingButtressing field: N/A
----------------finished:814-----------------------
----------------starting:900-----------------------
no hydrology.basal_moulin_input specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.002917
Total Core solution elapsed time: 0.648664
Linear solver elapsed time: 0.252698 (39%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 1.9e-15 < 1e-13 test id: 900 test name: SquareNoDynUnConfinedHydroDC field: SedimentWaterHead1
SUCCESS difference: 2.8e-15 < 1e-13 test id: 900 test name: SquareNoDynUnConfinedHydroDC field: SedimentWaterHead2
----------------finished:900-----------------------
----------------starting:901-----------------------
no hydrology.basal_moulin_input specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.002743
Total Core solution elapsed time: 0.009924
Linear solver elapsed time: 0.003945 (40%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 8e-16 < 1e-13 test id: 901 test name: SquareNoDynHydrologyDCOneLayer field: SedimentWaterHead
SUCCESS difference: 8.4e-11 < 3e-10 test id: 901 test name: SquareNoDynHydrologyDCOneLayer field: SedimentHeadResidual
----------------finished:901-----------------------
----------------starting:902-----------------------
no hydrology.basal_moulin_input specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.003986
Total Core solution elapsed time: 0.254094
Linear solver elapsed time: 0.121775 (48%)
Total elapsed time: 0 hrs 0 min 0 sec
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.003924
Total Core solution elapsed time: 0.289066
Linear solver elapsed time: 0.138246 (48%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 8.5e-16 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: SedimentWaterHead1
SUCCESS difference: 0 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: EplWaterHead1
SUCCESS difference: 0 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: SedimentHeadResidual1
SUCCESS difference: 1.1e-15 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: SedimentWaterHead4
SUCCESS difference: 0 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: EplWaterHead4
SUCCESS difference: 0 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: SedimentHeadResidual4
SUCCESS difference: 1.3e-15 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: SedimentWaterHead5
SUCCESS difference: 1e-14 < 5e-12 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: EplWaterHead5
SUCCESS difference: 0 < 1e-11 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: SedimentHeadResidual5
SUCCESS difference: 1.6e-15 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: SedimentWaterHead9
SUCCESS difference: 2.5e-14 < 5e-12 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: EplWaterHead9
SUCCESS difference: 0 < 1e-11 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: SedimentHeadResidual9
SUCCESS difference: 2.2e-14 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: EplWaterHead10
SUCCESS difference: 2.9e-14 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: EplWaterHeadSubstep10
SUCCESS difference: 1.2e-15 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: SedimentWaterHead10
SUCCESS difference: 1.6e-15 < 1e-13 test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: SedimentWaterHeadSubstep10
----------------finished:902-----------------------
----------------starting:903-----------------------
no hydrology.basal_moulin_input specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.006882
Total Core solution elapsed time: 0.028801
Linear solver elapsed time: 0.00809 (28%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 1e-15 < 1e-13 test id: 903 test name: SquareNoDynExtrudedHydrologyDCOneLayer field: SedimentWaterHead
SUCCESS difference: 8.4e-11 < 3e-10 test id: 903 test name: SquareNoDynExtrudedHydrologyDCOneLayer field: SedimentHeadResidual
----------------finished:903-----------------------
----------------starting:904-----------------------
no hydrology.basal_moulin_input specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.010311
Total Core solution elapsed time: 0.224188
Linear solver elapsed time: 0.058295 (26%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 8.5e-16 < 1e-13 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: SedimentWaterHead1
SUCCESS difference: 0 < 1e-13 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: EplWaterHead1
SUCCESS difference: 0 < 1e-13 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: SedimentHeadResidual1
SUCCESS difference: 1.1e-15 < 1e-13 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: SedimentWaterHead4
SUCCESS difference: 0 < 1e-13 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: EplWaterHead4
SUCCESS difference: 0 < 1e-13 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: SedimentHeadResidual4
SUCCESS difference: 1.3e-15 < 1e-13 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: SedimentWaterHead5
SUCCESS difference: 1e-14 < 5e-12 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: EplWaterHead5
SUCCESS difference: 0 < 2e-11 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: SedimentHeadResidual5
SUCCESS difference: 1.6e-15 < 1e-13 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: SedimentWaterHead9
SUCCESS difference: 2.5e-14 < 5e-12 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: EplWaterHead9
SUCCESS difference: 0 < 2e-11 test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: SedimentHeadResidual9
----------------finished:904-----------------------
----------------starting:905-----------------------
no hydrology.basal_moulin_input specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.004199
Total Core solution elapsed time: 0.57581
Linear solver elapsed time: 0.133862 (23%)
Total elapsed time: 0 hrs 0 min 0 sec
WARNING! There are options you set that were not used!
WARNING! could be spelling mistake, etc!
There are 6 unused database options. They are:
Option left: name:-ksp_type value: preonly source: code
Option left: name:-mat_mumps_icntl_14 value: 120 source: code
Option left: name:-mat_mumps_icntl_28 value: 2 source: code
Option left: name:-mat_mumps_icntl_29 value: 2 source: code
Option left: name:-pc_factor_mat_solver_type value: mumps source: code
Option left: name:-pc_type value: lu source: code
SUCCESS difference: 0 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: SedimentWaterHead1
SUCCESS difference: 0 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: EplWaterHead1
SUCCESS difference: 0 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: SedimentHeadResidual1
SUCCESS difference: 0 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: SedimentWaterHead4
SUCCESS difference: 0 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: EplWaterHead4
SUCCESS difference: 0 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: SedimentHeadResidual4
SUCCESS difference: 0 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: SedimentWaterHead5
SUCCESS difference: 0 < 5e-12 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: EplWaterHead5
SUCCESS difference: 0 < 1e-11 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: SedimentHeadResidual5
SUCCESS difference: 1.5e-15 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: SedimentWaterHead9
SUCCESS difference: 0 < 5e-12 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: EplWaterHead9
SUCCESS difference: 0 < 1e-11 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: SedimentHeadResidual9
SUCCESS difference: 0 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: EplWaterHead20
SUCCESS difference: 0 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: EplWaterHeadSubstep20
SUCCESS difference: 2.1e-15 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: SedimentWaterHead20
SUCCESS difference: 2.5e-15 < 1e-13 test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: SedimentWaterHeadSubstep20
----------------finished:905-----------------------
----------------starting:906-----------------------
no hydrology.basal_moulin_input specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.004652
Total Core solution elapsed time: 4.56687
Linear solver elapsed time: 2.5156 (55%)
Total elapsed time: 0 hrs 0 min 4 sec
SUCCESS difference: 4.4e-16 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: SedimentWaterHead2
SUCCESS difference: 1.9e-14 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: EplWaterHead2
SUCCESS difference: 1.3e-14 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: SedimentHeadResidual2
SUCCESS difference: 6.5e-16 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: SedimentHeadSubstep2
SUCCESS difference: 1.6e-14 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: EplHeadSubstep2
SUCCESS difference: 0 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: HydrologySubsteps2
SUCCESS difference: 0 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: HydrologySubTime2
SUCCESS difference: 4e-16 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: SedimentWaterHead3
SUCCESS difference: 2.6e-15 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: EplWaterHead3
SUCCESS difference: 4.1e-15 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: SedimentHeadResidual3
----------------finished:906-----------------------
MATLABEXITEDCORRECTLY
-----------End of matlab_log.log-----------
Build step 'Execute shell' marked build as failure
Recording test results
Finished: FAILURE
