----------------finished:338-----------------------
----------------starting:339-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
[0] ??? Error using ==> ./classes/IoModel.cpp:3145
[0] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[2] ??? Error using ==> ./classes/IoModel.cpp:3145
[2] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[1] ??? Error using ==> ./classes/IoModel.cpp:3145
[1] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
============================================================
Binary file test339.outbin not found
This typically happens when the run crashed.
Please check for error messages above or in the outlog
============================================================
WARNING: test339.outbin does not exist
Traceback (most recent call last):
File "/Users/jenkins/workspace/macOS-Silicon-Python/test/NightlyRun/runme.py", line 196, in runme
exec(compile(open('test{}.py'.format(id)).read(), 'test{}.py'.format(id), 'exec'), globals())
File "test339.py", line 34, in <module>
md = solve(md, 'Transient')
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/solve.py", line 164, in solve
md = loadresultsfromcluster(md)
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/loadresultsfromcluster.py", line 68, in loadresultsfromcluster
remove(md.private.runtimename + '.tar.gz')
AttributeError: 'NoneType' object has no attribute 'private'
FAILURE difference: N/A test id: 339 test name: SquareSheetConstrainedSmbMeltComponents3d field: N/A
----------------finished:339-----------------------
----------------starting:342-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no dsl.global_average_thermosteric_sea_level specified: transient values set to zero
no dsl.sea_surface_height_above_geoid specified: transient values set to zero
no dsl.sea_water_pressure_at_sea_floor specified: transient values set to zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
call computational core:
write lock file:
FemModel initialization elapsed time: 0.008698
Total Core solution elapsed time: 0.058315
Linear solver elapsed time: 0.035764 (61%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 1.9e-15 < 1e-13 test id: 342 test name: SquareSheetTherSteaPlume field: Temperature
SUCCESS difference: 2.7e-09 < 1e-08 test id: 342 test name: SquareSheetTherSteaPlume field: BasalforcingsGroundediceMeltingRate
SUCCESS difference: 1.2e-15 < 1e-13 test id: 342 test name: SquareSheetTherSteaPlume field: BasalforcingsGeothermalflux
----------------finished:342-----------------------
----------------starting:343-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no dsl.global_average_thermosteric_sea_level specified: transient values set to zero
no dsl.sea_surface_height_above_geoid specified: transient values set to zero
no dsl.sea_water_pressure_at_sea_floor specified: transient values set to zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
[1] ??? Error using ==> ./classes/IoModel.cpp:3145
[1] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[0] ??? Error using ==> ./classes/IoModel.cpp:3145
[0] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[2] ??? Error using ==> ./classes/IoModel.cpp:3145
[2] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
============================================================
Binary file test343.outbin not found
This typically happens when the run crashed.
Please check for error messages above or in the outlog
============================================================
WARNING: test343.outbin does not exist
Traceback (most recent call last):
File "/Users/jenkins/workspace/macOS-Silicon-Python/test/NightlyRun/runme.py", line 196, in runme
exec(compile(open('test{}.py'.format(id)).read(), 'test{}.py'.format(id), 'exec'), globals())
File "test343.py", line 30, in <module>
md = solve(md, 'Transient')
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/solve.py", line 164, in solve
md = loadresultsfromcluster(md)
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/loadresultsfromcluster.py", line 68, in loadresultsfromcluster
remove(md.private.runtimename + '.tar.gz')
AttributeError: 'NoneType' object has no attribute 'private'
FAILURE difference: N/A test id: 343 test name: SquareSheetConstrainedSmbGradientsEla2d field: N/A
----------------finished:343-----------------------
----------------starting:346-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no dsl.global_average_thermosteric_sea_level specified: transient values set to zero
no dsl.sea_surface_height_above_geoid specified: transient values set to zero
no dsl.sea_water_pressure_at_sea_floor specified: transient values set to zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
[0] ??? Error using ==> ./classes/IoModel.cpp:3145
[0] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[1] ??? Error using ==> ./classes/IoModel.cpp:3145
[1] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[2] ??? Error using ==> ./classes/IoModel.cpp:3145
[2] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
============================================================
Binary file test346.outbin not found
This typically happens when the run crashed.
Please check for error messages above or in the outlog
============================================================
WARNING: test346.outbin does not exist
Traceback (most recent call last):
File "/Users/jenkins/workspace/macOS-Silicon-Python/test/NightlyRun/runme.py", line 196, in runme
exec(compile(open('test{}.py'.format(id)).read(), 'test{}.py'.format(id), 'exec'), globals())
File "test346.py", line 25, in <module>
md = solve(md, 'Transient')
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/solve.py", line 164, in solve
md = loadresultsfromcluster(md)
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/loadresultsfromcluster.py", line 68, in loadresultsfromcluster
remove(md.private.runtimename + '.tar.gz')
AttributeError: 'NoneType' object has no attribute 'private'
FAILURE difference: N/A test id: 346 test name: SquareSheetConstrainedTherTranNyeCO2 field: N/A
----------------finished:346-----------------------
----------------starting:347-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no dsl.global_average_thermosteric_sea_level specified: transient values set to zero
no dsl.sea_surface_height_above_geoid specified: transient values set to zero
no dsl.sea_water_pressure_at_sea_floor specified: transient values set to zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
[0] ??? Error using ==> ./classes/IoModel.cpp:3145
[0] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[2] ??? Error using ==> ./classes/IoModel.cpp:3145
[2] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[1] ??? Error using ==> ./classes/IoModel.cpp:3145
[1] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
============================================================
Binary file test347.outbin not found
This typically happens when the run crashed.
Please check for error messages above or in the outlog
============================================================
WARNING: test347.outbin does not exist
Traceback (most recent call last):
File "/Users/jenkins/workspace/macOS-Silicon-Python/test/NightlyRun/runme.py", line 196, in runme
exec(compile(open('test{}.py'.format(id)).read(), 'test{}.py'.format(id), 'exec'), globals())
File "test347.py", line 28, in <module>
md = solve(md, 'Transient')
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/solve.py", line 164, in solve
md = loadresultsfromcluster(md)
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/loadresultsfromcluster.py", line 68, in loadresultsfromcluster
remove(md.private.runtimename + '.tar.gz')
AttributeError: 'NoneType' object has no attribute 'private'
FAILURE difference: N/A test id: 347 test name: SquareSheetConstrainedTherTranNyeH2O field: N/A
----------------finished:347-----------------------
----------------starting:352-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
[0] ??? Error using ==> ./classes/IoModel.cpp:3145
[0] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[1] ??? Error using ==> ./classes/IoModel.cpp:3145
[1] SetFilePointerToData error message:
[2] ??? Error using ==> ./classes/IoModel.cpp:3145
[2] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
could not find data with name "md.mmemasstransport.ids" in binary file
============================================================
Binary file test352.outbin not found
This typically happens when the run crashed.
Please check for error messages above or in the outlog
============================================================
WARNING: test352.outbin does not exist
Traceback (most recent call last):
File "/Users/jenkins/workspace/macOS-Silicon-Python/test/NightlyRun/runme.py", line 196, in runme
exec(compile(open('test{}.py'.format(id)).read(), 'test{}.py'.format(id), 'exec'), globals())
File "test352.py", line 30, in <module>
md = solve(md, 'Transient')
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/solve.py", line 164, in solve
md = loadresultsfromcluster(md)
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/loadresultsfromcluster.py", line 68, in loadresultsfromcluster
remove(md.private.runtimename + '.tar.gz')
AttributeError: 'NoneType' object has no attribute 'private'
FAILURE difference: N/A test id: 352 test name: SquareSheetConstrainedSmbforcingClim2d field: N/A
----------------finished:352-----------------------
----------------starting:353-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
[0] ??? Error using ==> ./classes/IoModel.cpp:3145
[0] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[2] ??? Error using ==> ./classes/IoModel.cpp:3145
[2] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[1] ??? Error using ==> ./classes/IoModel.cpp:3145
[1] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
============================================================
Binary file test353.outbin not found
This typically happens when the run crashed.
Please check for error messages above or in the outlog
============================================================
WARNING: test353.outbin does not exist
Traceback (most recent call last):
File "/Users/jenkins/workspace/macOS-Silicon-Python/test/NightlyRun/runme.py", line 196, in runme
exec(compile(open('test{}.py'.format(id)).read(), 'test{}.py'.format(id), 'exec'), globals())
File "test353.py", line 34, in <module>
md = solve(md, 'Transient')
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/solve.py", line 164, in solve
md = loadresultsfromcluster(md)
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/loadresultsfromcluster.py", line 68, in loadresultsfromcluster
remove(md.private.runtimename + '.tar.gz')
AttributeError: 'NoneType' object has no attribute 'private'
FAILURE difference: N/A test id: 353 test name: SquareSheetConstrainedSmbComponentsClim2d field: N/A
----------------finished:353-----------------------
----------------starting:356-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no dsl.global_average_thermosteric_sea_level specified: transient values set to zero
no dsl.sea_surface_height_above_geoid specified: transient values set to zero
no dsl.sea_water_pressure_at_sea_floor specified: transient values set to zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
call computational core:
x | Cost function f(x) | List of contributions
====================== step 1/2 ===============================
x = 0 | f(x) = 1008983 | 1008983 3.838459e-34
x = 1 | f(x) = 915273.6 | 915273.6 1.12984e-05
x = 0.381966 | f(x) = 899226.1 | 899226.1 1.648414e-06
x = 0.618034 | f(x) = 873055.8 | 873055.8 4.315604e-06
====================== step 2/2 ===============================
x = 0 | f(x) = 857940.3 | 857940.3 4.315604e-06
x = 1 | f(x) = 803900.7 | 803900.7 2.963215e-05
x = 0.381966 | f(x) = 807722 | 807722 1.131055e-05
x = 0.618034 | f(x) = 795880.1 | 795880.1 1.728697e-05
write lock file:
FemModel initialization elapsed time: 0.009905
Total Core solution elapsed time: 0.221197
Linear solver elapsed time: 0.162632 (74%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 2.3e-15 < 1e-12 test id: 356 test name: TransientFrictionSchoof field: Gradient
SUCCESS difference: 5.5e-15 < 1e-13 test id: 356 test name: TransientFrictionSchoof field: Misfits
SUCCESS difference: 1.4e-16 < 1e-13 test id: 356 test name: TransientFrictionSchoof field: FrictionC
SUCCESS difference: 0 < 1e-13 test id: 356 test name: TransientFrictionSchoof field: Pressure
SUCCESS difference: 6.6e-16 < 1e-13 test id: 356 test name: TransientFrictionSchoof field: Vel
SUCCESS difference: 1.6e-15 < 1e-13 test id: 356 test name: TransientFrictionSchoof field: Vx
SUCCESS difference: 8.4e-16 < 1e-13 test id: 356 test name: TransientFrictionSchoof field: Vy
----------------finished:356-----------------------
----------------starting:359-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no dsl.global_average_thermosteric_sea_level specified: transient values set to zero
no dsl.sea_surface_height_above_geoid specified: transient values set to zero
no dsl.sea_water_pressure_at_sea_floor specified: transient values set to zero
no balancethickness.thickening_rate specified: values set as zero
checking model consistency
marshalling file 'testChannels'.bin
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
call computational core:
iteration 1/4 time [yr]: 0.00 (time step: 0.00)
updating effective pressure
saving temporary results
iteration 2/4 time [yr]: 0.00 (time step: 0.00)
updating effective pressure
saving temporary results
iteration 3/4 time [yr]: 0.00 (time step: 0.00)
updating effective pressure
saving temporary results
iteration 4/4 time [yr]: 0.00 (time step: 0.00)
updating effective pressure
saving temporary results
write lock file:
FemModel initialization elapsed time: 0.010207
Total Core solution elapsed time: 0.777024
Linear solver elapsed time: 0.473717 (61%)
Total elapsed time: 0 hrs 0 min 0 sec
loading results from cluster
SUCCESS difference: 4.6e-16 < 1e-14 test id: 359 test name: SquareSheetHydrologyGlaDSTransitionModel field: HydrologySheetThickness1
SUCCESS difference: 7.1e-14 < 8e-14 test id: 359 test name: SquareSheetHydrologyGlaDSTransitionModel field: HydraulicPotential1
SUCCESS difference: 2.7e-12 < 3e-12 test id: 359 test name: SquareSheetHydrologyGlaDSTransitionModel field: ChannelArea1
SUCCESS difference: 5.7e-16 < 1e-14 test id: 359 test name: SquareSheetHydrologyGlaDSTransitionModel field: HydrologySheetThickness2
SUCCESS difference: 7.2e-14 < 8e-14 test id: 359 test name: SquareSheetHydrologyGlaDSTransitionModel field: HydraulicPotential2
SUCCESS difference: 2.6e-12 < 3e-12 test id: 359 test name: SquareSheetHydrologyGlaDSTransitionModel field: ChannelArea2
SUCCESS difference: 1.1e-15 < 1e-14 test id: 359 test name: SquareSheetHydrologyGlaDSTransitionModel field: HydrologySheetThickness3
SUCCESS difference: 7.4e-14 < 8e-14 test id: 359 test name: SquareSheetHydrologyGlaDSTransitionModel field: HydraulicPotential3
SUCCESS difference: 2.6e-12 < 3e-12 test id: 359 test name: SquareSheetHydrologyGlaDSTransitionModel field: ChannelArea3
SUCCESS difference: 8.9e-16 < 1e-14 test id: 359 test name: SquareSheetHydrologyGlaDSTransitionModel field: HydrologySheetThickness4
SUCCESS difference: 8.3e-14 < 9e-14 test id: 359 test name: SquareSheetHydrologyGlaDSTransitionModel field: HydraulicPotential4
SUCCESS difference: 2.6e-12 < 3e-12 test id: 359 test name: SquareSheetHydrologyGlaDSTransitionModel field: ChannelArea4
----------------finished:359-----------------------
----------------starting:402-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
call computational core:
write lock file:
FemModel initialization elapsed time: 0.016576
Total Core solution elapsed time: 0.169652
Linear solver elapsed time: 0.118761 (70%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 3.2e-15 < 1e-13 test id: 402 test name: SquareSheetShelfStressSSA3d field: Vx
SUCCESS difference: 1.7e-15 < 1e-13 test id: 402 test name: SquareSheetShelfStressSSA3d field: Vy
SUCCESS difference: 8.7e-15 < 1e-13 test id: 402 test name: SquareSheetShelfStressSSA3d field: Vz
SUCCESS difference: 2e-15 < 1e-13 test id: 402 test name: SquareSheetShelfStressSSA3d field: Vel
SUCCESS difference: 1e-16 < 1e-13 test id: 402 test name: SquareSheetShelfStressSSA3d field: Pressure
----------------finished:402-----------------------
----------------starting:403-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
call computational core:
write lock file:
FemModel initialization elapsed time: 0.011973
Total Core solution elapsed time: 0.076585
Linear solver elapsed time: 0.05609 (73%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 5.1e-10 < 3e-09 test id: 403 test name: SquareSheetShelfStressHO field: Vx
SUCCESS difference: 3e-10 < 3e-09 test id: 403 test name: SquareSheetShelfStressHO field: Vy
SUCCESS difference: 2.1e-10 < 3e-09 test id: 403 test name: SquareSheetShelfStressHO field: Vz
SUCCESS difference: 3e-10 < 3e-09 test id: 403 test name: SquareSheetShelfStressHO field: Vel
SUCCESS difference: 1e-16 < 3e-09 test id: 403 test name: SquareSheetShelfStressHO field: Pressure
----------------finished:403-----------------------
----------------starting:406-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
call computational core:
write lock file:
FemModel initialization elapsed time: 0.009813
Total Core solution elapsed time: 0.077913
Linear solver elapsed time: 0.046539 (60%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 2.3e-15 < 1e-13 test id: 406 test name: SquareSheetShelfTherStea field: Temperature
SUCCESS difference: 1.5e-06 < 1e-05 test id: 406 test name: SquareSheetShelfTherStea field: BasalforcingsGroundediceMeltingRate
----------------finished:406-----------------------
----------------starting:407-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
[0] ??? Error using ==> ./classes/IoModel.cpp:3145
[0] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[2] ??? Error using ==> ./classes/IoModel.cpp:3145
[2] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[1] ??? Error using ==> ./classes/IoModel.cpp:3145
[1] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
============================================================
Binary file test407.outbin not found
This typically happens when the run crashed.
Please check for error messages above or in the outlog
============================================================
WARNING: test407.outbin does not exist
Traceback (most recent call last):
File "/Users/jenkins/workspace/macOS-Silicon-Python/test/NightlyRun/runme.py", line 196, in runme
exec(compile(open('test{}.py'.format(id)).read(), 'test{}.py'.format(id), 'exec'), globals())
File "test407.py", line 21, in <module>
md = solve(md, 'Transient')
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/solve.py", line 164, in solve
md = loadresultsfromcluster(md)
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/loadresultsfromcluster.py", line 68, in loadresultsfromcluster
remove(md.private.runtimename + '.tar.gz')
AttributeError: 'NoneType' object has no attribute 'private'
FAILURE difference: N/A test id: 407 test name: SquareSheetShelfTherTran field: N/A
----------------finished:407-----------------------
----------------starting:408-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
[0] ??? Error using ==> ./classes/IoModel.cpp:3145
[0] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[1] ??? Error using ==> ./classes/IoModel.cpp:3145
[1] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[2] ??? Error using ==> ./classes/IoModel.cpp:3145
[2] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
============================================================
Binary file test408.outbin not found
This typically happens when the run crashed.
Please check for error messages above or in the outlog
============================================================
WARNING: test408.outbin does not exist
Traceback (most recent call last):
File "/Users/jenkins/workspace/macOS-Silicon-Python/test/NightlyRun/runme.py", line 196, in runme
exec(compile(open('test{}.py'.format(id)).read(), 'test{}.py'.format(id), 'exec'), globals())
File "test408.py", line 30, in <module>
md = solve(md, 'Transient')
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/solve.py", line 164, in solve
md = loadresultsfromcluster(md)
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/loadresultsfromcluster.py", line 68, in loadresultsfromcluster
remove(md.private.runtimename + '.tar.gz')
AttributeError: 'NoneType' object has no attribute 'private'
FAILURE difference: N/A test id: 408 test name: SquareSheetShelfTranSSA3d field: N/A
----------------finished:408-----------------------
----------------starting:409-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
[0] ??? Error using ==> ./classes/IoModel.cpp:3145
[0] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[1] ??? Error using ==> ./classes/IoModel.cpp:3145
[1] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[2] ??? Error using ==> ./classes/IoModel.cpp:3145
[2] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
============================================================
Binary file test409.outbin not found
This typically happens when the run crashed.
Please check for error messages above or in the outlog
============================================================
WARNING: test409.outbin does not exist
Traceback (most recent call last):
File "/Users/jenkins/workspace/macOS-Silicon-Python/test/NightlyRun/runme.py", line 196, in runme
exec(compile(open('test{}.py'.format(id)).read(), 'test{}.py'.format(id), 'exec'), globals())
File "test409.py", line 19, in <module>
md = solve(md, 'Transient')
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/solve.py", line 164, in solve
md = loadresultsfromcluster(md)
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/loadresultsfromcluster.py", line 68, in loadresultsfromcluster
remove(md.private.runtimename + '.tar.gz')
AttributeError: 'NoneType' object has no attribute 'private'
FAILURE difference: N/A test id: 409 test name: SquareSheetShelfTranMHOPenalties field: N/A
----------------finished:409-----------------------
----------------starting:419-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
call computational core:
write lock file:
FemModel initialization elapsed time: 0.010218
Total Core solution elapsed time: 0.070422
Linear solver elapsed time: 0.04987 (71%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 1e-09 < 2e-09 test id: 419 test name: SquareSheetShelfStressSSAHOTiling field: Vx
SUCCESS difference: 6.9e-10 < 2e-09 test id: 419 test name: SquareSheetShelfStressSSAHOTiling field: Vy
SUCCESS difference: 1.7e-10 < 1e-09 test id: 419 test name: SquareSheetShelfStressSSAHOTiling field: Vz
SUCCESS difference: 7e-10 < 2e-09 test id: 419 test name: SquareSheetShelfStressSSAHOTiling field: Vel
SUCCESS difference: 1e-16 < 1e-09 test id: 419 test name: SquareSheetShelfStressSSAHOTiling field: Pressure
----------------finished:419-----------------------
----------------starting:426-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
[0] ??? Error using ==> ./classes/IoModel.cpp:3145
[0] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[1] ??? Error using ==> ./classes/IoModel.cpp:3145
[1] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[2] ??? Error using ==> ./classes/IoModel.cpp:3145
[2] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
============================================================
Binary file test426.outbin not found
This typically happens when the run crashed.
Please check for error messages above or in the outlog
============================================================
WARNING: test426.outbin does not exist
Traceback (most recent call last):
File "/Users/jenkins/workspace/macOS-Silicon-Python/test/NightlyRun/runme.py", line 196, in runme
exec(compile(open('test{}.py'.format(id)).read(), 'test{}.py'.format(id), 'exec'), globals())
File "test426.py", line 30, in <module>
md = solve(md, 'Transient')
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/solve.py", line 164, in solve
md = loadresultsfromcluster(md)
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/loadresultsfromcluster.py", line 68, in loadresultsfromcluster
remove(md.private.runtimename + '.tar.gz')
AttributeError: 'NoneType' object has no attribute 'private'
FAILURE difference: N/A test id: 426 test name: SquareSheetShelfGroundingLine3dAggressive field: N/A
----------------finished:426-----------------------
----------------starting:427-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
[0] ??? Error using ==> ./classes/IoModel.cpp:3145
[0] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[1] ??? Error using ==> ./classes/IoModel.cpp:3145
[1] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[2] ??? Error using ==> ./classes/IoModel.cpp:3145
[2] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
============================================================
Binary file test427.outbin not found
This typically happens when the run crashed.
Please check for error messages above or in the outlog
============================================================
WARNING: test427.outbin does not exist
Traceback (most recent call last):
File "/Users/jenkins/workspace/macOS-Silicon-Python/test/NightlyRun/runme.py", line 196, in runme
exec(compile(open('test{}.py'.format(id)).read(), 'test{}.py'.format(id), 'exec'), globals())
File "test427.py", line 28, in <module>
md = solve(md, 'Transient')
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/solve.py", line 164, in solve
md = loadresultsfromcluster(md)
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/loadresultsfromcluster.py", line 68, in loadresultsfromcluster
remove(md.private.runtimename + '.tar.gz')
AttributeError: 'NoneType' object has no attribute 'private'
FAILURE difference: N/A test id: 427 test name: SquareSheetShelfGroundingLine3dSoft field: N/A
----------------finished:427-----------------------
----------------starting:428-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
call computational core:
write lock file:
FemModel initialization elapsed time: 0.007479
Total Core solution elapsed time: 0.082839
Linear solver elapsed time: 0.057359 (69%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 6.5e-15 < 1e-13 test id: 428 test name: SquareSheetShelfStressSSA2dNewton field: Vx
SUCCESS difference: 2e-15 < 1e-13 test id: 428 test name: SquareSheetShelfStressSSA2dNewton field: Vy
SUCCESS difference: 2e-15 < 1e-13 test id: 428 test name: SquareSheetShelfStressSSA2dNewton field: Vel
SUCCESS difference: 1e-16 < 1e-13 test id: 428 test name: SquareSheetShelfStressSSA2dNewton field: Pressure
----------------finished:428-----------------------
----------------starting:429-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
call computational core:
write lock file:
FemModel initialization elapsed time: 0.013787
Total Core solution elapsed time: 0.191493
Linear solver elapsed time: 0.112614 (59%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 1.3e-09 < 2e-06 test id: 429 test name: SquareSheetShelfStressHONewton field: Vx
SUCCESS difference: 1.1e-09 < 2e-06 test id: 429 test name: SquareSheetShelfStressHONewton field: Vy
SUCCESS difference: 2.7e-10 < 1e-06 test id: 429 test name: SquareSheetShelfStressHONewton field: Vz
SUCCESS difference: 1e-09 < 2e-06 test id: 429 test name: SquareSheetShelfStressHONewton field: Vel
SUCCESS difference: 1e-16 < 1e-06 test id: 429 test name: SquareSheetShelfStressHONewton field: Pressure
----------------finished:429-----------------------
----------------starting:432-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
call computational core:
write lock file:
FemModel initialization elapsed time: 0.018131
Total Core solution elapsed time: 0.25694
Linear solver elapsed time: 0.177195 (69%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 3e-10 < 3e-09 test id: 432 test name: SquareSheetShelfSteaEnthalpyHO field: Vx
SUCCESS difference: 1.4e-10 < 1e-09 test id: 432 test name: SquareSheetShelfSteaEnthalpyHO field: Vy
SUCCESS difference: 4.1e-11 < 1e-09 test id: 432 test name: SquareSheetShelfSteaEnthalpyHO field: Vz
SUCCESS difference: 1.4e-10 < 1e-09 test id: 432 test name: SquareSheetShelfSteaEnthalpyHO field: Vel
SUCCESS difference: 1e-16 < 1e-13 test id: 432 test name: SquareSheetShelfSteaEnthalpyHO field: Pressure
SUCCESS difference: 1.7e-11 < 2e-10 test id: 432 test name: SquareSheetShelfSteaEnthalpyHO field: Temperature
SUCCESS difference: 1.4e-11 < 5e-10 test id: 432 test name: SquareSheetShelfSteaEnthalpyHO field: Waterfraction
SUCCESS difference: 9.2e-11 < 3e-09 test id: 432 test name: SquareSheetShelfSteaEnthalpyHO field: Enthalpy
----------------finished:432-----------------------
----------------starting:436-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
====== Testing rheology law: LliboutryDuval =
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
call computational core:
write lock file:
FemModel initialization elapsed time: 0.017803
Total Core solution elapsed time: 0.309707
Linear solver elapsed time: 0.206479 (67%)
Total elapsed time: 0 hrs 0 min 0 sec
====== Testing rheology law: CuffeyTemperate =
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
call computational core:
write lock file:
FemModel initialization elapsed time: 0.013921
Total Core solution elapsed time: 0.191331
Linear solver elapsed time: 0.129485 (68%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 5.9e-10 < 2e-09 test id: 436 test name: SquareSheetShelfSteaEnthalpyRheologiesHO field: VxLliboutryDuval
SUCCESS difference: 2e-10 < 1e-09 test id: 436 test name: SquareSheetShelfSteaEnthalpyRheologiesHO field: VyLliboutryDuval
SUCCESS difference: 5.4e-11 < 1e-09 test id: 436 test name: SquareSheetShelfSteaEnthalpyRheologiesHO field: VzLliboutryDuval
SUCCESS difference: 2e-10 < 1e-09 test id: 436 test name: SquareSheetShelfSteaEnthalpyRheologiesHO field: VelLliboutryDuval
SUCCESS difference: 1e-16 < 1e-13 test id: 436 test name: SquareSheetShelfSteaEnthalpyRheologiesHO field: PressureLliboutryDuval
SUCCESS difference: 3.5e-11 < 2e-10 test id: 436 test name: SquareSheetShelfSteaEnthalpyRheologiesHO field: TemperatureLliboutryDuval
SUCCESS difference: 5.4e-11 < 6e-10 test id: 436 test name: SquareSheetShelfSteaEnthalpyRheologiesHO field: WaterfractionLliboutryDuval
SUCCESS difference: 1.9e-10 < 1e-09 test id: 436 test name: SquareSheetShelfSteaEnthalpyRheologiesHO field: EnthalpyLliboutryDuval
SUCCESS difference: 2.9e-10 < 2e-09 test id: 436 test name: SquareSheetShelfSteaEnthalpyRheologiesHO field: VxCuffeyTemperate
SUCCESS difference: 1.4e-10 < 1e-09 test id: 436 test name: SquareSheetShelfSteaEnthalpyRheologiesHO field: VyCuffeyTemperate
SUCCESS difference: 5.2e-11 < 1e-09 test id: 436 test name: SquareSheetShelfSteaEnthalpyRheologiesHO field: VzCuffeyTemperate
SUCCESS difference: 1.4e-10 < 1e-09 test id: 436 test name: SquareSheetShelfSteaEnthalpyRheologiesHO field: VelCuffeyTemperate
SUCCESS difference: 1e-16 < 1e-13 test id: 436 test name: SquareSheetShelfSteaEnthalpyRheologiesHO field: PressureCuffeyTemperate
SUCCESS difference: 2.9e-11 < 2e-10 test id: 436 test name: SquareSheetShelfSteaEnthalpyRheologiesHO field: TemperatureCuffeyTemperate
SUCCESS difference: 8.4e-11 < 6e-10 test id: 436 test name: SquareSheetShelfSteaEnthalpyRheologiesHO field: WaterfractionCuffeyTemperate
SUCCESS difference: 1.6e-10 < 1e-09 test id: 436 test name: SquareSheetShelfSteaEnthalpyRheologiesHO field: EnthalpyCuffeyTemperate
----------------finished:436-----------------------
----------------starting:437-----------------------
----------------running-----------------------
creating thickness
creating velocities
creating drag
creating temperatures
creating flow law parameter
creating surface mass balance
boundary conditions for stressbalance model
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
boundary conditions for thermal model
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
[0] ??? Error using ==> ./classes/IoModel.cpp:3145
[0] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[1] ??? Error using ==> ./classes/IoModel.cpp:3145
[1] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[2] ??? Error using ==> ./classes/IoModel.cpp:3145
[2] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
============================================================
Binary file SquareThermal.outbin not found
This typically happens when the run crashed.
Please check for error messages above or in the outlog
============================================================
WARNING: SquareThermal.outbin does not exist
Traceback (most recent call last):
File "/Users/jenkins/workspace/macOS-Silicon-Python/test/NightlyRun/runme.py", line 196, in runme
exec(compile(open('test{}.py'.format(id)).read(), 'test{}.py'.format(id), 'exec'), globals())
File "test437.py", line 60, in <module>
md = solve(md, 'Transient')
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/solve.py", line 164, in solve
md = loadresultsfromcluster(md)
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/loadresultsfromcluster.py", line 68, in loadresultsfromcluster
remove(md.private.runtimename + '.tar.gz')
AttributeError: 'NoneType' object has no attribute 'private'
FAILURE difference: N/A test id: 437 test name: ThermalEnthBasalcondsTrans field: N/A
----------------finished:437-----------------------
----------------starting:438-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
/Users/jenkins/workspace/macOS-Silicon-Python/src/m/consistency/checkfield.py:175: RuntimeWarning: All-NaN slice encountered
minval = np.nanmin(field[:-1])
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
[0] ??? Error using ==> ./classes/IoModel.cpp:3145
[0] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[1] ??? Error using ==> ./classes/IoModel.cpp:3145
[1] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[2] ??? Error using ==> ./classes/IoModel.cpp:3145
[2] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
============================================================
Binary file test438.outbin not found
This typically happens when the run crashed.
Please check for error messages above or in the outlog
============================================================
WARNING: test438.outbin does not exist
Traceback (most recent call last):
File "/Users/jenkins/workspace/macOS-Silicon-Python/test/NightlyRun/runme.py", line 196, in runme
exec(compile(open('test{}.py'.format(id)).read(), 'test{}.py'.format(id), 'exec'), globals())
File "test438.py", line 22, in <module>
md = solve(md, 'Transient')
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/solve.py", line 164, in solve
md = loadresultsfromcluster(md)
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/loadresultsfromcluster.py", line 68, in loadresultsfromcluster
remove(md.private.runtimename + '.tar.gz')
AttributeError: 'NoneType' object has no attribute 'private'
FAILURE difference: N/A test id: 438 test name: TransientFrictionWaterlayer2D field: N/A
----------------finished:438-----------------------
----------------starting:439-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
[0] ??? Error using ==> ./classes/IoModel.cpp:3145
[0] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[1] ??? Error using ==> ./classes/IoModel.cpp:3145
[1] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[2] ??? Error using ==> ./classes/IoModel.cpp:3145
[2] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
============================================================
Binary file test439.outbin not found
This typically happens when the run crashed.
Please check for error messages above or in the outlog
============================================================
WARNING: test439.outbin does not exist
Traceback (most recent call last):
File "/Users/jenkins/workspace/macOS-Silicon-Python/test/NightlyRun/runme.py", line 196, in runme
exec(compile(open('test{}.py'.format(id)).read(), 'test{}.py'.format(id), 'exec'), globals())
File "test439.py", line 24, in <module>
md = solve(md, 'Transient')
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/solve.py", line 164, in solve
md = loadresultsfromcluster(md)
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/loadresultsfromcluster.py", line 68, in loadresultsfromcluster
remove(md.private.runtimename + '.tar.gz')
AttributeError: 'NoneType' object has no attribute 'private'
FAILURE difference: N/A test id: 439 test name: TransientFrictionWaterlayer3D field: N/A
----------------finished:439-----------------------
----------------starting:443-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
[0] ??? Error using ==> ./classes/IoModel.cpp:3145
[0] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[1] ??? Error using ==> ./classes/IoModel.cpp:3145
[1] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[2] ??? Error using ==> ./classes/IoModel.cpp:3145
[2] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
============================================================
Binary file test443.outbin not found
This typically happens when the run crashed.
Please check for error messages above or in the outlog
============================================================
WARNING: test443.outbin does not exist
Traceback (most recent call last):
File "/Users/jenkins/workspace/macOS-Silicon-Python/test/NightlyRun/runme.py", line 196, in runme
exec(compile(open('test{}.py'.format(id)).read(), 'test{}.py'.format(id), 'exec'), globals())
File "test443.py", line 56, in <module>
md = solve(md, 'Transient')
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/solve.py", line 164, in solve
md = loadresultsfromcluster(md)
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/loadresultsfromcluster.py", line 68, in loadresultsfromcluster
remove(md.private.runtimename + '.tar.gz')
AttributeError: 'NoneType' object has no attribute 'private'
FAILURE difference: N/A test id: 443 test name: SquareSheetShelfTranSSA3dAggressiveRegionalOutput field: N/A
----------------finished:443-----------------------
----------------starting:446-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
call computational core:
write lock file:
FemModel initialization elapsed time: 0.007912
Total Core solution elapsed time: 0.080652
Linear solver elapsed time: 0.064143 (80%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 3.5e-15 < 1e-13 test id: 446 test name: SquareSheetShelfStressMOLHO2d field: Vx
SUCCESS difference: 2.2e-15 < 1e-13 test id: 446 test name: SquareSheetShelfStressMOLHO2d field: Vy
SUCCESS difference: 2.4e-15 < 1e-13 test id: 446 test name: SquareSheetShelfStressMOLHO2d field: Vel
SUCCESS difference: 0 < 1e-13 test id: 446 test name: SquareSheetShelfStressMOLHO2d field: Pressure
SUCCESS difference: 3.5e-15 < 1e-13 test id: 446 test name: SquareSheetShelfStressMOLHO2d field: VxSurface
SUCCESS difference: 2.4e-15 < 1e-13 test id: 446 test name: SquareSheetShelfStressMOLHO2d field: VySurface
SUCCESS difference: 1.1e-15 < 1e-13 test id: 446 test name: SquareSheetShelfStressMOLHO2d field: VxShear
SUCCESS difference: 1.6e-15 < 1e-13 test id: 446 test name: SquareSheetShelfStressMOLHO2d field: VyShear
SUCCESS difference: 3.4e-15 < 1e-13 test id: 446 test name: SquareSheetShelfStressMOLHO2d field: VxBase
SUCCESS difference: 2.4e-15 < 1e-13 test id: 446 test name: SquareSheetShelfStressMOLHO2d field: VyBase
----------------finished:446-----------------------
----------------starting:449-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
[0] ??? Error using ==> ./classes/IoModel.cpp:3145
[0] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[2] ??? Error using ==> ./classes/IoModel.cpp:3145
[2] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[1] ??? Error using ==> ./classes/IoModel.cpp:3145
[1] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
============================================================
Binary file test449.outbin not found
This typically happens when the run crashed.
Please check for error messages above or in the outlog
============================================================
WARNING: test449.outbin does not exist
Traceback (most recent call last):
File "/Users/jenkins/workspace/macOS-Silicon-Python/test/NightlyRun/runme.py", line 196, in runme
exec(compile(open('test{}.py'.format(id)).read(), 'test{}.py'.format(id), 'exec'), globals())
File "test449.py", line 62, in <module>
md = solve(md, 'Transient')
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/solve.py", line 164, in solve
md = loadresultsfromcluster(md)
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/loadresultsfromcluster.py", line 68, in loadresultsfromcluster
remove(md.private.runtimename + '.tar.gz')
AttributeError: 'NoneType' object has no attribute 'private'
FAILURE difference: N/A test id: 449 test name: MISMIP3DMOLHO field: N/A
----------------finished:449-----------------------
----------------starting:481-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
[0] ??? Error using ==> ./classes/IoModel.cpp:3145
[0] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[2] ??? Error using ==> ./classes/IoModel.cpp:3145
[2] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[1] ??? Error using ==> ./classes/IoModel.cpp:3145
[1] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
============================================================
Binary file test481.outbin not found
This typically happens when the run crashed.
Please check for error messages above or in the outlog
============================================================
WARNING: test481.outbin does not exist
Traceback (most recent call last):
File "/Users/jenkins/workspace/macOS-Silicon-Python/test/NightlyRun/runme.py", line 196, in runme
exec(compile(open('test{}.py'.format(id)).read(), 'test{}.py'.format(id), 'exec'), globals())
File "test481.py", line 25, in <module>
md = solve(md, 'Transient')
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/solve.py", line 164, in solve
md = loadresultsfromcluster(md)
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/loadresultsfromcluster.py", line 68, in loadresultsfromcluster
remove(md.private.runtimename + '.tar.gz')
AttributeError: 'NoneType' object has no attribute 'private'
FAILURE difference: N/A test id: 481 test name: TransientFrictionSchoof field: N/A
----------------finished:481-----------------------
----------------starting:491-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
[0] ??? Error using ==> ./classes/IoModel.cpp:3145
[0] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[1] ??? Error using ==> ./classes/IoModel.cpp:3145
[1] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[2] ??? Error using ==> ./classes/IoModel.cpp:3145
[2] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
============================================================
Binary file test491.outbin not found
This typically happens when the run crashed.
Please check for error messages above or in the outlog
============================================================
WARNING: test491.outbin does not exist
Traceback (most recent call last):
File "/Users/jenkins/workspace/macOS-Silicon-Python/test/NightlyRun/runme.py", line 196, in runme
exec(compile(open('test{}.py'.format(id)).read(), 'test{}.py'.format(id), 'exec'), globals())
File "test491.py", line 30, in <module>
md = solve(md, 'Transient')
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/solve.py", line 164, in solve
md = loadresultsfromcluster(md)
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/loadresultsfromcluster.py", line 68, in loadresultsfromcluster
remove(md.private.runtimename + '.tar.gz')
AttributeError: 'NoneType' object has no attribute 'private'
FAILURE difference: N/A test id: 491 test name: SquareSheetShelfTranMeltArtDiff field: N/A
----------------finished:491-----------------------
----------------starting:494-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
[0] ??? Error using ==> ./classes/IoModel.cpp:3145
[0] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[1] ??? Error using ==> ./classes/IoModel.cpp:3145
[1] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[2] ??? Error using ==> ./classes/IoModel.cpp:3145
[2] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
============================================================
Binary file test494.outbin not found
This typically happens when the run crashed.
Please check for error messages above or in the outlog
============================================================
WARNING: test494.outbin does not exist
Traceback (most recent call last):
File "/Users/jenkins/workspace/macOS-Silicon-Python/test/NightlyRun/runme.py", line 196, in runme
exec(compile(open('test{}.py'.format(id)).read(), 'test{}.py'.format(id), 'exec'), globals())
File "test494.py", line 30, in <module>
md = solve(md, 'Transient')
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/solve.py", line 164, in solve
md = loadresultsfromcluster(md)
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/loadresultsfromcluster.py", line 68, in loadresultsfromcluster
remove(md.private.runtimename + '.tar.gz')
AttributeError: 'NoneType' object has no attribute 'private'
FAILURE difference: N/A test id: 494 test name: SquareSheetShelfTranMeltFCT field: N/A
----------------finished:494-----------------------
----------------starting:495-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
[0] ??? Error using ==> ./classes/IoModel.cpp:3145
[0] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[1] ??? Error using ==> ./classes/IoModel.cpp:3145
[1] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[2] ??? Error using ==> ./classes/IoModel.cpp:3145
[2] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
============================================================
Binary file test495.outbin not found
This typically happens when the run crashed.
Please check for error messages above or in the outlog
============================================================
WARNING: test495.outbin does not exist
Traceback (most recent call last):
File "/Users/jenkins/workspace/macOS-Silicon-Python/test/NightlyRun/runme.py", line 196, in runme
exec(compile(open('test{}.py'.format(id)).read(), 'test{}.py'.format(id), 'exec'), globals())
File "test495.py", line 30, in <module>
md = solve(md, 'Transient')
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/solve.py", line 164, in solve
md = loadresultsfromcluster(md)
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/loadresultsfromcluster.py", line 68, in loadresultsfromcluster
remove(md.private.runtimename + '.tar.gz')
AttributeError: 'NoneType' object has no attribute 'private'
FAILURE difference: N/A test id: 495 test name: SquareSheetShelfTranMeltSUPG field: N/A
----------------finished:495-----------------------
----------------starting:502-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
call computational core:
write lock file:
FemModel initialization elapsed time: 0.011469
Total Core solution elapsed time: 0.074075
Linear solver elapsed time: 0.051703 (70%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 1.6e-13 < 1e-08 test id: 502 test name: PigStressHO field: Vx
SUCCESS difference: 4.1e-13 < 1e-08 test id: 502 test name: PigStressHO field: Vy
SUCCESS difference: 4.3e-13 < 1e-08 test id: 502 test name: PigStressHO field: Vz
SUCCESS difference: 3.5e-13 < 1e-08 test id: 502 test name: PigStressHO field: Vel
SUCCESS difference: 3.2e-16 < 1e-08 test id: 502 test name: PigStressHO field: Pressure
----------------finished:502-----------------------
----------------starting:503-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
call computational core:
write lock file:
FemModel initialization elapsed time: 0.015086
Total Core solution elapsed time: 0.226839
Linear solver elapsed time: 0.131323 (58%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 4.2e-11 < 1e-09 test id: 503 test name: PigStressFS field: Vx
SUCCESS difference: 3.9e-11 < 1e-09 test id: 503 test name: PigStressFS field: Vy
SUCCESS difference: 3.2e-11 < 1e-09 test id: 503 test name: PigStressFS field: Vz
SUCCESS difference: 3.2e-11 < 1e-09 test id: 503 test name: PigStressFS field: Vel
SUCCESS difference: 3.3e-11 < 1e-09 test id: 503 test name: PigStressFS field: Pressure
----------------finished:503-----------------------
----------------starting:506-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
[0] ??? Error using ==> ./classes/IoModel.cpp:3145
[0] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[1] ??? Error using ==> ./classes/IoModel.cpp:3145
[1] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[2] ??? Error using ==> ./classes/IoModel.cpp:3145
[2] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
============================================================
Binary file test506.outbin not found
This typically happens when the run crashed.
Please check for error messages above or in the outlog
============================================================
WARNING: test506.outbin does not exist
Traceback (most recent call last):
File "/Users/jenkins/workspace/macOS-Silicon-Python/test/NightlyRun/runme.py", line 196, in runme
exec(compile(open('test{}.py'.format(id)).read(), 'test{}.py'.format(id), 'exec'), globals())
File "test506.py", line 19, in <module>
md = solve(md, 'Transient')
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/solve.py", line 164, in solve
md = loadresultsfromcluster(md)
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/loadresultsfromcluster.py", line 68, in loadresultsfromcluster
remove(md.private.runtimename + '.tar.gz')
AttributeError: 'NoneType' object has no attribute 'private'
FAILURE difference: N/A test id: 506 test name: PigTranHO field: N/A
----------------finished:506-----------------------
----------------starting:509-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
call computational core:
write lock file:
FemModel initialization elapsed time: 0.012377
Total Core solution elapsed time: 0.655504
Linear solver elapsed time: 0.460833 (70%)
Total elapsed time: 0 hrs 0 min 0 sec
WARNING! There are options you set that were not used!
WARNING! could be spelling mistake, etc!
There are 7 unused database options. They are:
Option left: name:-ksp_type value: preonly source: code
Option left: name:-mat_mumps_icntl_14 value: 120 source: code
Option left: name:-mat_mumps_icntl_28 value: 1 source: code
Option left: name:-mat_mumps_icntl_29 value: 2 source: code
Option left: name:-mat_type value: mpiaij source: code
Option left: name:-pc_factor_mat_solver_type value: mumps source: code
Option left: name:-pc_type value: lu source: code
SUCCESS difference: 3.8e-10 < 2e-09 test id: 509 test name: PigSteaHO field: Vx
SUCCESS difference: 4e-10 < 2e-09 test id: 509 test name: PigSteaHO field: Vy
SUCCESS difference: 1.5e-08 < 5e-08 test id: 509 test name: PigSteaHO field: Vz
SUCCESS difference: 1.5e-08 < 5e-08 test id: 509 test name: PigSteaHO field: Vel
SUCCESS difference: 2.1e-16 < 1e-09 test id: 509 test name: PigSteaHO field: Pressure
SUCCESS difference: 2.4e-09 < 8e-09 test id: 509 test name: PigSteaHO field: Temperature
SUCCESS difference: 2.6e-08 < 1e-06 test id: 509 test name: PigSteaHO field: BasalforcingsGroundediceMeltingRate
----------------finished:509-----------------------
----------------starting:512-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
call computational core:
x | Cost function f(x) | List of contributions
====================== step 1/2 ===============================
x = 0 | f(x) = 125.7303 | 125.7296 0.0006420665
x = 1 | f(x) = 119.1935 | 119.1928 0.0006447871
====================== step 2/2 ===============================
x = 0 | f(x) = 119.1118 | 119.1111 0.0006447871
x = 1 | f(x) = 112.5586 | 112.5579 0.0006652207
write lock file:
FemModel initialization elapsed time: 0.010931
Total Core solution elapsed time: 0.144518
Linear solver elapsed time: 0.092405 (64%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 1.2e-13 < 1e-11 test id: 512 test name: PigCMDragHO field: Gradient
SUCCESS difference: 1.8e-14 < 1e-11 test id: 512 test name: PigCMDragHO field: Misfits
SUCCESS difference: 1e-14 < 1e-11 test id: 512 test name: PigCMDragHO field: FrictionCoefficient
SUCCESS difference: 3.2e-16 < 1e-11 test id: 512 test name: PigCMDragHO field: Pressure
SUCCESS difference: 2.8e-13 < 1e-11 test id: 512 test name: PigCMDragHO field: Vel
SUCCESS difference: 5.6e-13 < 1e-11 test id: 512 test name: PigCMDragHO field: Vx
SUCCESS difference: 2.7e-13 < 1e-11 test id: 512 test name: PigCMDragHO field: Vy
----------------finished:512-----------------------
----------------starting:513-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
call computational core:
x | Cost function f(x) | List of contributions
====================== step 1/2 ===============================
x = 0 | f(x) = 99.51715 | 99.51669 0.0004575168
x = 1 | f(x) = 93.99829 | 93.99784 0.0004559883
====================== step 2/2 ===============================
x = 0 | f(x) = 93.78083 | 93.78038 0.0004559883
x = 1 | f(x) = 88.30076 | 88.3003 0.0004621097
write lock file:
FemModel initialization elapsed time: 0.030083
Total Core solution elapsed time: 0.95591
Linear solver elapsed time: 0.604634 (63%)
Total elapsed time: 0 hrs 0 min 0 sec
WARNING! There are options you set that were not used!
WARNING! could be spelling mistake, etc!
There are 7 unused database options. They are:
Option left: name:-ksp_type value: preonly source: code
Option left: name:-mat_mumps_icntl_14 value: 120 source: code
Option left: name:-mat_mumps_icntl_28 value: 1 source: code
Option left: name:-mat_mumps_icntl_29 value: 2 source: code
Option left: name:-mat_type value: mpiaij source: code
Option left: name:-pc_factor_mat_solver_type value: mumps source: code
Option left: name:-pc_type value: lu source: code
SUCCESS difference: 1.6e-11 < 5e-08 test id: 513 test name: PigCMDragSteaSSA3d field: Gradient
SUCCESS difference: 2.2e-12 < 4e-10 test id: 513 test name: PigCMDragSteaSSA3d field: Misfits
SUCCESS difference: 9.2e-13 < 1e-10 test id: 513 test name: PigCMDragSteaSSA3d field: FrictionCoefficient
SUCCESS difference: 2.1e-16 < 1e-10 test id: 513 test name: PigCMDragSteaSSA3d field: Pressure
SUCCESS difference: 2.2e-11 < 3e-06 test id: 513 test name: PigCMDragSteaSSA3d field: Vel
SUCCESS difference: 5.4e-11 < 4e-06 test id: 513 test name: PigCMDragSteaSSA3d field: Vx
SUCCESS difference: 1.9e-11 < 3.4e-06 test id: 513 test name: PigCMDragSteaSSA3d field: Vy
SUCCESS difference: 5.1e-11 < 3e-06 test id: 513 test name: PigCMDragSteaSSA3d field: Vz
SUCCESS difference: 4.8e-11 < 2e-06 test id: 513 test name: PigCMDragSteaSSA3d field: Temperature
SUCCESS difference: 4.2e-08 < 2e-06 test id: 513 test name: PigCMDragSteaSSA3d field: BasalforcingsGroundediceMeltingRate
----------------finished:513-----------------------
----------------starting:516-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
call computational core:
write lock file:
FemModel initialization elapsed time: 0.009197
Total Core solution elapsed time: 0.031442
Linear solver elapsed time: 0.016915 (54%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 2.4e-13 < 1e-11 test id: 516 test name: PigTherSteaSUPG field: Temperature
SUCCESS difference: 6.1e-13 < 1e-11 test id: 516 test name: PigTherSteaSUPG field: BasalforcingsGroundediceMeltingRate
----------------finished:516-----------------------
----------------starting:518-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
call computational core:
write lock file:
FemModel initialization elapsed time: 0.010412
Total Core solution elapsed time: 0.080722
Linear solver elapsed time: 0.060298 (75%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 4.2e-13 < 5e-13 test id: 518 test name: field: Vx
SUCCESS difference: 5.3e-13 < 6e-13 test id: 518 test name: field: Vy
SUCCESS difference: 5.1e-13 < 6e-13 test id: 518 test name: field: Vel
SUCCESS difference: 3.2e-16 < 1e-13 test id: 518 test name: field: Pressure
SUCCESS difference: 4.2e-13 < 5e-13 test id: 518 test name: field: VxSurface
SUCCESS difference: 5.3e-13 < 6e-13 test id: 518 test name: field: VySurface
SUCCESS difference: 2.3e-14 < 1e-13 test id: 518 test name: field: VxShear
SUCCESS difference: 6.6e-14 < 1e-13 test id: 518 test name: field: VyShear
SUCCESS difference: 4.2e-13 < 5e-13 test id: 518 test name: field: VxBase
SUCCESS difference: 5.3e-13 < 6e-13 test id: 518 test name: field: VyBase
----------------finished:518-----------------------
----------------starting:519-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
[0] ??? Error using ==> ./classes/IoModel.cpp:3145
[0] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[2] ??? Error using ==> ./classes/IoModel.cpp:3145
[2] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[1] ??? Error using ==> ./classes/IoModel.cpp:3145
[1] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
============================================================
Binary file test519.outbin not found
This typically happens when the run crashed.
Please check for error messages above or in the outlog
============================================================
WARNING: test519.outbin does not exist
Traceback (most recent call last):
File "/Users/jenkins/workspace/macOS-Silicon-Python/test/NightlyRun/runme.py", line 196, in runme
exec(compile(open('test{}.py'.format(id)).read(), 'test{}.py'.format(id), 'exec'), globals())
File "test519.py", line 21, in <module>
md = solve(md, 'Transient')
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/solve.py", line 164, in solve
md = loadresultsfromcluster(md)
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/loadresultsfromcluster.py", line 68, in loadresultsfromcluster
remove(md.private.runtimename + '.tar.gz')
AttributeError: 'NoneType' object has no attribute 'private'
FAILURE difference: N/A test id: 519 test name: PigTranMOLHO2d field: N/A
----------------finished:519-----------------------
----------------starting:542-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
[0] ??? Error using ==> ./classes/IoModel.cpp:3145
[0] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[1] ??? Error using ==> ./classes/IoModel.cpp:3145
[1] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
============================================================
Binary file test542.outbin not found
This typically happens when the run crashed.
Please check for error messages above or in the outlog
============================================================
WARNING: test542.outbin does not exist
Traceback (most recent call last):
File "/Users/jenkins/workspace/macOS-Silicon-Python/test/NightlyRun/runme.py", line 196, in runme
exec(compile(open('test{}.py'.format(id)).read(), 'test{}.py'.format(id), 'exec'), globals())
File "test542.py", line 49, in <module>
md = solve(md, 'Transient')
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/solve.py", line 164, in solve
md = loadresultsfromcluster(md)
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/loadresultsfromcluster.py", line 68, in loadresultsfromcluster
remove(md.private.runtimename + '.tar.gz')
AttributeError: 'NoneType' object has no attribute 'private'
FAILURE difference: N/A test id: 542 test name: PigTranFrontalforcingsrignot field: N/A
----------------finished:542-----------------------
----------------starting:543-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
stochasticforcing.stocahstictimestep not specified: set to md.timestepping.time_step
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
[0] ??? Error using ==> ./classes/IoModel.cpp:3145
[0] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[1] ??? Error using ==> ./classes/IoModel.cpp:3145
[1] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
============================================================
Binary file test543.outbin not found
This typically happens when the run crashed.
Please check for error messages above or in the outlog
============================================================
WARNING: test543.outbin does not exist
Traceback (most recent call last):
File "/Users/jenkins/workspace/macOS-Silicon-Python/test/NightlyRun/runme.py", line 196, in runme
exec(compile(open('test{}.py'.format(id)).read(), 'test{}.py'.format(id), 'exec'), globals())
File "test543.py", line 140, in <module>
md = solve(md, 'Transient')
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/solve.py", line 164, in solve
md = loadresultsfromcluster(md)
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/loadresultsfromcluster.py", line 68, in loadresultsfromcluster
remove(md.private.runtimename + '.tar.gz')
AttributeError: 'NoneType' object has no attribute 'private'
FAILURE difference: N/A test id: 543 test name: PigTranRignotarma field: N/A
----------------finished:543-----------------------
----------------starting:601-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
call computational core:
write lock file:
FemModel initialization elapsed time: 0.006667
Total Core solution elapsed time: 0.013127
Linear solver elapsed time: 0.008487 (65%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 3.8e-15 < 1e-13 test id: 601 test name: 79NorthMasstransp2d field: Thickness
----------------finished:601-----------------------
----------------starting:604-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
call computational core:
write lock file:
FemModel initialization elapsed time: 0.007657
Total Core solution elapsed time: 0.027578
Linear solver elapsed time: 0.020956 (76%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 7.2e-16 < 1e-13 test id: 604 test name: 79NorthSurfSlop2d field: SurfaceSlopeX
SUCCESS difference: 6.3e-16 < 1e-13 test id: 604 test name: 79NorthSurfSlop2d field: SurfaceSlopeY
----------------finished:604-----------------------
----------------starting:605-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
call computational core:
write lock file:
FemModel initialization elapsed time: 0.006922
Total Core solution elapsed time: 0.028496
Linear solver elapsed time: 0.01977 (69%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 7.6e-16 < 1e-13 test id: 605 test name: 79NorthSurfSlop3d field: SurfaceSlopeX
SUCCESS difference: 6.3e-16 < 1e-13 test id: 605 test name: 79NorthSurfSlop3d field: SurfaceSlopeY
----------------finished:605-----------------------
----------------starting:610-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
[0] ??? Error using ==> ./classes/IoModel.cpp:3145
[0] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[1] ??? Error using ==> ./classes/IoModel.cpp:3145
[1] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[2] ??? Error using ==> ./classes/IoModel.cpp:3145
[2] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
============================================================
Binary file test610.outbin not found
This typically happens when the run crashed.
Please check for error messages above or in the outlog
============================================================
WARNING: test610.outbin does not exist
Traceback (most recent call last):
File "/Users/jenkins/workspace/macOS-Silicon-Python/test/NightlyRun/runme.py", line 196, in runme
exec(compile(open('test{}.py'.format(id)).read(), 'test{}.py'.format(id), 'exec'), globals())
File "test610.py", line 33, in <module>
md = solve(md, 'Transient')
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/solve.py", line 164, in solve
md = loadresultsfromcluster(md)
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/loadresultsfromcluster.py", line 68, in loadresultsfromcluster
remove(md.private.runtimename + '.tar.gz')
AttributeError: 'NoneType' object has no attribute 'private'
FAILURE difference: N/A test id: 610 test name: 79NorthPISMhydro field: N/A
----------------finished:610-----------------------
----------------starting:611-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
call computational core:
x | Cost function f(x) | List of contributions
====================== step 1/2 ===============================
x = 0 | f(x) = 5.576527e+15 | 5.576527e+15
x = 1 | f(x) = 2.800818e+15 | 2.800818e+15
====================== step 2/2 ===============================
x = 0 | f(x) = 2.800818e+15 | 2.800818e+15
x = 1 | f(x) = 9.878839e+14 | 9.878839e+14
write lock file:
FemModel initialization elapsed time: 0.008757
Total Core solution elapsed time: 0.089207
Linear solver elapsed time: 0.058536 (66%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 1.9e-13 < 1e-12 test id: 611 test name: 79NorthCMBalThic2dCG field: Gradient
SUCCESS difference: 1.9e-14 < 1e-12 test id: 611 test name: 79NorthCMBalThic2dCG field: Misfits
SUCCESS difference: 2.4e-13 < 1e-12 test id: 611 test name: 79NorthCMBalThic2dCG field: BalancethicknessThickeningRate
SUCCESS difference: 2.3e-13 < 1e-12 test id: 611 test name: 79NorthCMBalThic2dCG field: Thickness
----------------finished:611-----------------------
----------------starting:621-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
stochasticforcing.stocahstictimestep not specified: set to md.timestepping.time_step
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
[0] ??? Error using ==> ./classes/IoModel.cpp:3145
[0] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[1] ??? Error using ==> ./classes/IoModel.cpp:3145
[1] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[2] ??? Error using ==> ./classes/IoModel.cpp:3145
[2] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
============================================================
Binary file test621.outbin not found
This typically happens when the run crashed.
Please check for error messages above or in the outlog
============================================================
WARNING: test621.outbin does not exist
Traceback (most recent call last):
File "/Users/jenkins/workspace/macOS-Silicon-Python/test/NightlyRun/runme.py", line 196, in runme
exec(compile(open('test{}.py'.format(id)).read(), 'test{}.py'.format(id), 'exec'), globals())
File "test621.py", line 56, in <module>
md = solve(md, 'Transient')
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/solve.py", line 164, in solve
md = loadresultsfromcluster(md)
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/loadresultsfromcluster.py", line 68, in loadresultsfromcluster
remove(md.private.runtimename + '.tar.gz')
AttributeError: 'NoneType' object has no attribute 'private'
FAILURE difference: N/A test id: 621 test name: 79NorthStochFrictionWaterPressure field: N/A
----------------finished:621-----------------------
----------------starting:701-----------------------
----------------running-----------------------
Construction of a mesh from a given geometry
=====Testing MINI Full-Stokes Finite element=====
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
call computational core:
solver residue: norm(KU-F)/norm(F)=1.16409e-16
solver residue: norm(KU-F)/norm(F)=8.74292e-16
solver residue: norm(KU-F)/norm(F)=1.48305e-16
solver residue: norm(KU-F)/norm(F)=5.92415e-15
mechanical equilibrium convergence criterion 100 > 0.01 %
Convergence criterion: norm(du)/norm(u) 7.19835e+23 > 1 %
Convergence criterion: max(du) 8.72588e+06
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=1.53071e-14
mechanical equilibrium convergence criterion 2.12624 > 0.01 %
Convergence criterion: norm(du)/norm(u) 1.10539 > 1 %
Convergence criterion: max(du) 266316
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=2.95709e-14
mechanical equilibrium convergence criterion 1.73917 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.642157 < 1 %
Convergence criterion: max(du) 136471
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=4.84106e-14
mechanical equilibrium convergence criterion 0.717979 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.232724 < 1 %
Convergence criterion: max(du) 79604.1
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=7.29524e-14
mechanical equilibrium convergence criterion 0.432302 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.0930063 < 1 %
Convergence criterion: max(du) 25173.2
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=1.03784e-13
mechanical equilibrium convergence criterion 0.265448 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.0469947 < 1 %
Convergence criterion: max(du) 18682.5
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=5.58839e-14
mechanical equilibrium convergence criterion 0.167098 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.0264618 < 1 %
Convergence criterion: max(du) 12063.6
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=1.14914e-13
mechanical equilibrium convergence criterion 0.106278 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.0150307 < 1 %
Convergence criterion: max(du) 7028.6
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=7.0132e-14
mechanical equilibrium convergence criterion 0.067923 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00855668 < 1 %
Convergence criterion: max(du) 3930.75
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=1.25935e-13
mechanical equilibrium convergence criterion 0.0435415 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00491833 < 1 %
Convergence criterion: max(du) 2178.5
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=8.30805e-14
mechanical equilibrium convergence criterion 0.0279973 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.0028636 < 1 %
Convergence criterion: max(du) 1213.66
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=6.07298e-14
mechanical equilibrium convergence criterion 0.0180659 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00168822 < 1 %
Convergence criterion: max(du) 682.744
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=7.81766e-14
mechanical equilibrium convergence criterion 0.0117016 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00100627 < 1 %
Convergence criterion: max(du) 387.91
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=1.02657e-13
mechanical equilibrium convergence criterion 0.00760798 < 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00060554 < 1 %
Convergence criterion: max(du) 222.316
number of unstable constraints: 0
total number of iterations: 14
write lock file:
FemModel initialization elapsed time: 0.009786
Total Core solution elapsed time: 0.497393
Linear solver elapsed time: 0.426422 (86%)
Total elapsed time: 0 hrs 0 min 0 sec
=====Testing MINIcondensed Full-Stokes Finite element=====
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
call computational core:
solver residue: norm(KU-F)/norm(F)=1.16409e-16
solver residue: norm(KU-F)/norm(F)=8.74292e-16
solver residue: norm(KU-F)/norm(F)=1.48305e-16
solver residue: norm(KU-F)/norm(F)=3.84108e-15
mechanical equilibrium convergence criterion 100 > 0.01 %
Convergence criterion: norm(du)/norm(u) 7.19835e+23 > 1 %
Convergence criterion: max(du) 8.72588e+06
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=8.90978e-15
mechanical equilibrium convergence criterion 1.96276 > 0.01 %
Convergence criterion: norm(du)/norm(u) 1.10539 > 1 %
Convergence criterion: max(du) 266316
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=1.75082e-14
mechanical equilibrium convergence criterion 0.994782 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.642157 < 1 %
Convergence criterion: max(du) 136471
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=2.30287e-14
mechanical equilibrium convergence criterion 0.635413 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.232724 < 1 %
Convergence criterion: max(du) 79604.1
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=2.53294e-14
mechanical equilibrium convergence criterion 0.390791 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.0930063 < 1 %
Convergence criterion: max(du) 25173.2
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=3.31294e-14
mechanical equilibrium convergence criterion 0.243341 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.0469947 < 1 %
Convergence criterion: max(du) 18682.5
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=3.52945e-14
mechanical equilibrium convergence criterion 0.154189 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.0264618 < 1 %
Convergence criterion: max(du) 12063.6
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=3.69497e-14
mechanical equilibrium convergence criterion 0.0983817 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.0150307 < 1 %
Convergence criterion: max(du) 7028.6
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=4.20963e-14
mechanical equilibrium convergence criterion 0.063036 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00855668 < 1 %
Convergence criterion: max(du) 3930.75
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=4.42816e-14
mechanical equilibrium convergence criterion 0.0405301 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00491833 < 1 %
Convergence criterion: max(du) 2178.5
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=4.33497e-14
mechanical equilibrium convergence criterion 0.0261518 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.0028636 < 1 %
Convergence criterion: max(du) 1213.66
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=4.56221e-14
mechanical equilibrium convergence criterion 0.0169366 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00168822 < 1 %
Convergence criterion: max(du) 682.744
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=3.94604e-14
mechanical equilibrium convergence criterion 0.0110089 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00100627 < 1 %
Convergence criterion: max(du) 387.91
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=3.45431e-14
mechanical equilibrium convergence criterion 0.00718082 < 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00060554 < 1 %
Convergence criterion: max(du) 222.316
number of unstable constraints: 0
total number of iterations: 14
write lock file:
FemModel initialization elapsed time: 0.013598
Total Core solution elapsed time: 0.25905
Linear solver elapsed time: 0.188005 (73%)
Total elapsed time: 0 hrs 0 min 0 sec
=====Testing TaylorHood Full-Stokes Finite element=====
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
call computational core:
solver residue: norm(KU-F)/norm(F)=1.16409e-16
solver residue: norm(KU-F)/norm(F)=8.74292e-16
solver residue: norm(KU-F)/norm(F)=1.48305e-16
solver residue: norm(KU-F)/norm(F)=1.60623e-14
mechanical equilibrium convergence criterion 100 > 0.01 %
Convergence criterion: norm(du)/norm(u) 7.20099e+23 > 1 %
Convergence criterion: max(du) 8.74189e+06
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=3.27378e-14
mechanical equilibrium convergence criterion 2.00457 > 0.01 %
Convergence criterion: norm(du)/norm(u) 1.20805 > 1 %
Convergence criterion: max(du) 335077
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=1.10831e-13
mechanical equilibrium convergence criterion 1.78268 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.75602 < 1 %
Convergence criterion: max(du) 132780
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=1.11897e-13
mechanical equilibrium convergence criterion 0.832236 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.263456 < 1 %
Convergence criterion: max(du) 78736.2
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=1.53998e-13
mechanical equilibrium convergence criterion 0.401028 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.0758391 < 1 %
Convergence criterion: max(du) 23665.1
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=1.85526e-13
mechanical equilibrium convergence criterion 0.238045 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.0305218 < 1 %
Convergence criterion: max(du) 10429.3
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=1.6275e-13
mechanical equilibrium convergence criterion 0.150226 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.0152555 < 1 %
Convergence criterion: max(du) 6394.21
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=1.86766e-13
mechanical equilibrium convergence criterion 0.0972593 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00801846 < 1 %
Convergence criterion: max(du) 3530.22
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=1.88066e-13
mechanical equilibrium convergence criterion 0.0640213 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00429142 < 1 %
Convergence criterion: max(du) 1833.16
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=2.14016e-13
mechanical equilibrium convergence criterion 0.0424357 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00234604 < 1 %
Convergence criterion: max(du) 940.664
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=3.04155e-13
mechanical equilibrium convergence criterion 0.028166 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00130469 < 1 %
Convergence criterion: max(du) 481.928
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=2.47958e-13
mechanical equilibrium convergence criterion 0.0186787 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.000736614 < 1 %
Convergence criterion: max(du) 247.852
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=1.84468e-13
mechanical equilibrium convergence criterion 0.0123701 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.000421607 < 1 %
Convergence criterion: max(du) 128.51
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=2.83024e-13
mechanical equilibrium convergence criterion 0.00818204 < 0.01 %
Convergence criterion: norm(du)/norm(u) 0.000244185 < 1 %
Convergence criterion: max(du) 67.3462
number of unstable constraints: 0
total number of iterations: 14
write lock file:
FemModel initialization elapsed time: 0.010119
Total Core solution elapsed time: 0.637077
Linear solver elapsed time: 0.545781 (86%)
Total elapsed time: 0 hrs 0 min 0 sec
=====Testing LATaylorHood Full-Stokes Finite element=====
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
call computational core:
solver residue: norm(KU-F)/norm(F)=1.16409e-16
solver residue: norm(KU-F)/norm(F)=8.74292e-16
solver residue: norm(KU-F)/norm(F)=1.48305e-16
solver residue: norm(KU-F)/norm(F)=2.14916e-13
Convergence criterion: norm(du)/norm(u) inf > 1 %
solver residue: norm(KU-F)/norm(F)=8.57854e-13
Convergence criterion: norm(du)/norm(u) 613.069 > 1 %
solver residue: norm(KU-F)/norm(F)=1.52382e-12
Convergence criterion: norm(du)/norm(u) 275.933 > 1 %
solver residue: norm(KU-F)/norm(F)=3.76759e-12
Convergence criterion: norm(du)/norm(u) 144.079 > 1 %
solver residue: norm(KU-F)/norm(F)=4.75133e-12
Convergence criterion: norm(du)/norm(u) 81.951 > 1 %
solver residue: norm(KU-F)/norm(F)=4.19743e-12
Convergence criterion: norm(du)/norm(u) 49.2493 > 1 %
solver residue: norm(KU-F)/norm(F)=4.67572e-12
Convergence criterion: norm(du)/norm(u) 30.672 > 1 %
solver residue: norm(KU-F)/norm(F)=6.58412e-12
Convergence criterion: norm(du)/norm(u) 19.5516 > 1 %
solver residue: norm(KU-F)/norm(F)=4.20428e-12
Convergence criterion: norm(du)/norm(u) 12.654 > 1 %
solver residue: norm(KU-F)/norm(F)=6.02114e-12
Convergence criterion: norm(du)/norm(u) 8.27209 > 1 %
solver residue: norm(KU-F)/norm(F)=6.13764e-12
Convergence criterion: norm(du)/norm(u) 5.44337 > 1 %
solver residue: norm(KU-F)/norm(F)=5.37761e-12
Convergence criterion: norm(du)/norm(u) 3.59763 > 1 %
solver residue: norm(KU-F)/norm(F)=9.62009e-12
Convergence criterion: norm(du)/norm(u) 2.38464 > 1 %
solver residue: norm(KU-F)/norm(F)=5.71541e-12
Convergence criterion: norm(du)/norm(u) 1.58367 > 1 %
solver residue: norm(KU-F)/norm(F)=9.76156e-12
Convergence criterion: norm(du)/norm(u) 1.05307 > 1 %
solver residue: norm(KU-F)/norm(F)=4.14386e-12
Convergence criterion: norm(du)/norm(u) 0.700842 < 1 %
solver residue: norm(KU-F)/norm(F)=4.52437e-17
Convergence criterion: norm(du)/norm(u) 0.700842 < 1 %
Convergence criterion: norm(dp/)/norm(p) inf > 1 %
solver residue: norm(KU-F)/norm(F)=6.03819e-12
Convergence criterion: norm(du)/norm(u) 0.466658 < 1 %
solver residue: norm(KU-F)/norm(F)=4.5445e-17
Convergence criterion: norm(du)/norm(u) 0.466658 < 1 %
Convergence criterion: norm(dp/)/norm(p) 100.471 > 1 %
solver residue: norm(KU-F)/norm(F)=5.07575e-12
Convergence criterion: norm(du)/norm(u) 0.310831 < 1 %
solver residue: norm(KU-F)/norm(F)=4.53028e-17
Convergence criterion: norm(du)/norm(u) 0.310831 < 1 %
Convergence criterion: norm(dp/)/norm(p) 50.2749 > 1 %
solver residue: norm(KU-F)/norm(F)=5.01072e-12
Convergence criterion: norm(du)/norm(u) 0.207079 < 1 %
solver residue: norm(KU-F)/norm(F)=4.19105e-17
Convergence criterion: norm(du)/norm(u) 0.207079 < 1 %
Convergence criterion: norm(dp/)/norm(p) 33.5253 > 1 %
solver residue: norm(KU-F)/norm(F)=5.01333e-12
Convergence criterion: norm(du)/norm(u) 0.137971 < 1 %
solver residue: norm(KU-F)/norm(F)=4.18522e-17
Convergence criterion: norm(du)/norm(u) 0.137971 < 1 %
Convergence criterion: norm(dp/)/norm(p) 25.1428 > 1 %
solver residue: norm(KU-F)/norm(F)=5.20645e-12
Convergence criterion: norm(du)/norm(u) 0.0919261 < 1 %
solver residue: norm(KU-F)/norm(F)=4.18134e-17
Convergence criterion: norm(du)/norm(u) 0.0919261 < 1 %
Convergence criterion: norm(dp/)/norm(p) 20.1099 > 1 %
solver residue: norm(KU-F)/norm(F)=4.07725e-12
Convergence criterion: norm(du)/norm(u) 0.061242 < 1 %
solver residue: norm(KU-F)/norm(F)=4.17876e-17
Convergence criterion: norm(du)/norm(u) 0.061242 < 1 %
Convergence criterion: norm(dp/)/norm(p) 16.7533 > 1 %
solver residue: norm(KU-F)/norm(F)=4.45468e-12
Convergence criterion: norm(du)/norm(u) 0.0407918 < 1 %
solver residue: norm(KU-F)/norm(F)=4.17704e-17
Convergence criterion: norm(du)/norm(u) 0.0407918 < 1 %
Convergence criterion: norm(dp/)/norm(p) 14.3552 > 1 %
solver residue: norm(KU-F)/norm(F)=8.45778e-12
Convergence criterion: norm(du)/norm(u) 0.0271613 < 1 %
solver residue: norm(KU-F)/norm(F)=4.1759e-17
Convergence criterion: norm(du)/norm(u) 0.0271613 < 1 %
Convergence criterion: norm(dp/)/norm(p) 12.5566 > 1 %
solver residue: norm(KU-F)/norm(F)=6.3917e-12
Convergence criterion: norm(du)/norm(u) 0.0180758 < 1 %
solver residue: norm(KU-F)/norm(F)=4.17513e-17
Convergence criterion: norm(du)/norm(u) 0.0180758 < 1 %
Convergence criterion: norm(dp/)/norm(p) 11.1579 > 1 %
solver residue: norm(KU-F)/norm(F)=5.6327e-12
Convergence criterion: norm(du)/norm(u) 0.0120195 < 1 %
solver residue: norm(KU-F)/norm(F)=4.17463e-17
Convergence criterion: norm(du)/norm(u) 0.0120195 < 1 %
Convergence criterion: norm(dp/)/norm(p) 10.0391 > 1 %
solver residue: norm(KU-F)/norm(F)=6.03205e-12
Convergence criterion: norm(du)/norm(u) 0.0079825 < 1 %
solver residue: norm(KU-F)/norm(F)=4.17429e-17
Convergence criterion: norm(du)/norm(u) 0.0079825 < 1 %
Convergence criterion: norm(dp/)/norm(p) 9.12392 > 1 %
solver residue: norm(KU-F)/norm(F)=6.70345e-12
Convergence criterion: norm(du)/norm(u) 0.0052914 < 1 %
solver residue: norm(KU-F)/norm(F)=4.17407e-17
Convergence criterion: norm(du)/norm(u) 0.0052914 < 1 %
Convergence criterion: norm(dp/)/norm(p) 8.36151 > 1 %
solver residue: norm(KU-F)/norm(F)=8.24319e-12
Convergence criterion: norm(du)/norm(u) 0.00349749 < 1 %
solver residue: norm(KU-F)/norm(F)=4.17392e-17
Convergence criterion: norm(du)/norm(u) 0.00349749 < 1 %
Convergence criterion: norm(dp/)/norm(p) 7.71658 > 1 %
solver residue: norm(KU-F)/norm(F)=5.86067e-12
Convergence criterion: norm(du)/norm(u) 0.00230167 < 1 %
solver residue: norm(KU-F)/norm(F)=4.17383e-17
Convergence criterion: norm(du)/norm(u) 0.00230167 < 1 %
Convergence criterion: norm(dp/)/norm(p) 7.16395 > 1 %
solver residue: norm(KU-F)/norm(F)=4.88964e-12
Convergence criterion: norm(du)/norm(u) 0.00150451 < 1 %
solver residue: norm(KU-F)/norm(F)=4.17376e-17
Convergence criterion: norm(du)/norm(u) 0.00150451 < 1 %
Convergence criterion: norm(dp/)/norm(p) 6.68514 > 1 %
solver residue: norm(KU-F)/norm(F)=6.80102e-12
Convergence criterion: norm(du)/norm(u) 0.000973122 < 1 %
solver residue: norm(KU-F)/norm(F)=4.17372e-17
Convergence criterion: norm(du)/norm(u) 0.000973122 < 1 %
Convergence criterion: norm(dp/)/norm(p) 6.26629 > 1 %
solver residue: norm(KU-F)/norm(F)=5.71826e-12
Convergence criterion: norm(du)/norm(u) 0.000618906 < 1 %
solver residue: norm(KU-F)/norm(F)=4.1737e-17
Convergence criterion: norm(du)/norm(u) 0.000618906 < 1 %
Convergence criterion: norm(dp/)/norm(p) 5.89682 > 1 %
solver residue: norm(KU-F)/norm(F)=6.3669e-12
Convergence criterion: norm(du)/norm(u) 0.000382789 < 1 %
solver residue: norm(KU-F)/norm(F)=4.17368e-17
Convergence criterion: norm(du)/norm(u) 0.000382789 < 1 %
Convergence criterion: norm(dp/)/norm(p) 5.56848 > 1 %
solver residue: norm(KU-F)/norm(F)=6.23667e-12
Convergence criterion: norm(du)/norm(u) 0.000225425 < 1 %
solver residue: norm(KU-F)/norm(F)=4.17367e-17
Convergence criterion: norm(du)/norm(u) 0.000225425 < 1 %
Convergence criterion: norm(dp/)/norm(p) 5.27476 > 1 %
maximum number of nonlinear iterations (20) exceeded
total number of iterations: 19
write lock file:
FemModel initialization elapsed time: 0.011666
Total Core solution elapsed time: 0.988718
Linear solver elapsed time: 0.699215 (71%)
Total elapsed time: 0 hrs 0 min 1 sec
=====Testing CrouzeixRaviart Full-Stokes Finite element=====
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
call computational core:
solver residue: norm(KU-F)/norm(F)=1.16409e-16
solver residue: norm(KU-F)/norm(F)=8.74292e-16
solver residue: norm(KU-F)/norm(F)=1.48305e-16
solver residue: norm(KU-F)/norm(F)=1.02557e-13
mechanical equilibrium convergence criterion 100 > 0.01 %
Convergence criterion: norm(du)/norm(u) 1.63969e+24 > 1 %
Convergence criterion: max(du) 8.83861e+06
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=7.37023e-13
mechanical equilibrium convergence criterion 2.11064 > 0.01 %
Convergence criterion: norm(du)/norm(u) 1.08444 > 1 %
Convergence criterion: max(du) 446853
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=5.68032e-13
mechanical equilibrium convergence criterion 2.09404 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.862624 < 1 %
Convergence criterion: max(du) 414759
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=5.89984e-13
mechanical equilibrium convergence criterion 0.909059 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.341995 < 1 %
Convergence criterion: max(du) 161809
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=7.71003e-13
mechanical equilibrium convergence criterion 0.479574 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.131721 < 1 %
Convergence criterion: max(du) 90123.3
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=7.9251e-13
mechanical equilibrium convergence criterion 0.284195 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.0670162 < 1 %
Convergence criterion: max(du) 54409.5
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=7.07585e-13
mechanical equilibrium convergence criterion 0.175223 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.0291123 < 1 %
Convergence criterion: max(du) 25524.6
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=1.16145e-12
mechanical equilibrium convergence criterion 0.113576 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.0147368 < 1 %
Convergence criterion: max(du) 11821.9
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=1.05395e-12
mechanical equilibrium convergence criterion 0.0746106 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00819942 < 1 %
Convergence criterion: max(du) 6242.62
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=1.43206e-12
mechanical equilibrium convergence criterion 0.0495047 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00471128 < 1 %
Convergence criterion: max(du) 3515.55
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=1.25723e-12
mechanical equilibrium convergence criterion 0.0329431 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00276078 < 1 %
Convergence criterion: max(du) 2073.3
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=1.22524e-12
mechanical equilibrium convergence criterion 0.0218954 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.00164519 < 1 %
Convergence criterion: max(du) 1261.94
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=1.17357e-12
mechanical equilibrium convergence criterion 0.0145181 > 0.01 %
Convergence criterion: norm(du)/norm(u) 0.000994648 < 1 %
Convergence criterion: max(du) 783.637
number of unstable constraints: 0
solver residue: norm(KU-F)/norm(F)=9.75324e-13
mechanical equilibrium convergence criterion 0.00960519 < 0.01 %
Convergence criterion: norm(du)/norm(u) 0.000608466 < 1 %
Convergence criterion: max(du) 492.666
number of unstable constraints: 0
total number of iterations: 14
write lock file:
FemModel initialization elapsed time: 0.01304
Total Core solution elapsed time: 0.816123
Linear solver elapsed time: 0.69173 (85%)
Total elapsed time: 0 hrs 0 min 0 sec
=====Testing LACrouzeixRaviart Full-Stokes Finite element=====
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
call computational core:
solver residue: norm(KU-F)/norm(F)=1.16409e-16
solver residue: norm(KU-F)/norm(F)=8.74292e-16
solver residue: norm(KU-F)/norm(F)=1.48305e-16
solver residue: norm(KU-F)/norm(F)=2.25601e-13
Convergence criterion: norm(du)/norm(u) inf > 1 %
solver residue: norm(KU-F)/norm(F)=8.79076e-13
Convergence criterion: norm(du)/norm(u) 613.091 > 1 %
solver residue: norm(KU-F)/norm(F)=1.74552e-12
Convergence criterion: norm(du)/norm(u) 275.944 > 1 %
solver residue: norm(KU-F)/norm(F)=3.02177e-12
Convergence criterion: norm(du)/norm(u) 144.085 > 1 %
solver residue: norm(KU-F)/norm(F)=3.65509e-12
Convergence criterion: norm(du)/norm(u) 81.9547 > 1 %
solver residue: norm(KU-F)/norm(F)=3.77401e-12
Convergence criterion: norm(du)/norm(u) 49.2514 > 1 %
solver residue: norm(KU-F)/norm(F)=5.12885e-12
Convergence criterion: norm(du)/norm(u) 30.6732 > 1 %
solver residue: norm(KU-F)/norm(F)=5.12073e-12
Convergence criterion: norm(du)/norm(u) 19.5522 > 1 %
solver residue: norm(KU-F)/norm(F)=5.69029e-12
Convergence criterion: norm(du)/norm(u) 12.6543 > 1 %
solver residue: norm(KU-F)/norm(F)=5.55876e-12
Convergence criterion: norm(du)/norm(u) 8.27219 > 1 %
solver residue: norm(KU-F)/norm(F)=5.29538e-12
Convergence criterion: norm(du)/norm(u) 5.44338 > 1 %
solver residue: norm(KU-F)/norm(F)=5.98179e-12
Convergence criterion: norm(du)/norm(u) 3.5976 > 1 %
solver residue: norm(KU-F)/norm(F)=6.03255e-12
Convergence criterion: norm(du)/norm(u) 2.3846 > 1 %
solver residue: norm(KU-F)/norm(F)=5.54679e-12
Convergence criterion: norm(du)/norm(u) 1.58362 > 1 %
solver residue: norm(KU-F)/norm(F)=6.63939e-12
Convergence criterion: norm(du)/norm(u) 1.05304 > 1 %
solver residue: norm(KU-F)/norm(F)=4.93329e-12
Convergence criterion: norm(du)/norm(u) 0.700815 < 1 %
solver residue: norm(KU-F)/norm(F)=1.31795e-16
Convergence criterion: norm(du)/norm(u) 0.700815 < 1 %
Convergence criterion: norm(dp/)/norm(p) inf > 1 %
solver residue: norm(KU-F)/norm(F)=6.7075e-12
Convergence criterion: norm(du)/norm(u) 0.466662 < 1 %
solver residue: norm(KU-F)/norm(F)=1.34632e-16
Convergence criterion: norm(du)/norm(u) 0.466662 < 1 %
Convergence criterion: norm(dp/)/norm(p) 100.47 > 1 %
solver residue: norm(KU-F)/norm(F)=5.61003e-12
Convergence criterion: norm(du)/norm(u) 0.310857 < 1 %
solver residue: norm(KU-F)/norm(F)=1.3365e-16
Convergence criterion: norm(du)/norm(u) 0.310857 < 1 %
Convergence criterion: norm(dp/)/norm(p) 50.2739 > 1 %
solver residue: norm(KU-F)/norm(F)=7.71302e-12
Convergence criterion: norm(du)/norm(u) 0.207121 < 1 %
solver residue: norm(KU-F)/norm(F)=1.33587e-16
Convergence criterion: norm(du)/norm(u) 0.207121 < 1 %
Convergence criterion: norm(dp/)/norm(p) 33.5245 > 1 %
solver residue: norm(KU-F)/norm(F)=5.03136e-12
Convergence criterion: norm(du)/norm(u) 0.138023 < 1 %
solver residue: norm(KU-F)/norm(F)=1.26718e-16
Convergence criterion: norm(du)/norm(u) 0.138023 < 1 %
Convergence criterion: norm(dp/)/norm(p) 25.1423 > 1 %
solver residue: norm(KU-F)/norm(F)=7.12969e-12
Convergence criterion: norm(du)/norm(u) 0.0919849 < 1 %
solver residue: norm(KU-F)/norm(F)=1.27897e-16
Convergence criterion: norm(du)/norm(u) 0.0919849 < 1 %
Convergence criterion: norm(dp/)/norm(p) 20.1095 > 1 %
solver residue: norm(KU-F)/norm(F)=1.11949e-11
Convergence criterion: norm(du)/norm(u) 0.0613056 < 1 %
solver residue: norm(KU-F)/norm(F)=1.25644e-16
Convergence criterion: norm(du)/norm(u) 0.0613056 < 1 %
Convergence criterion: norm(dp/)/norm(p) 16.753 > 1 %
solver residue: norm(KU-F)/norm(F)=6.06433e-12
Convergence criterion: norm(du)/norm(u) 0.0408587 < 1 %
solver residue: norm(KU-F)/norm(F)=1.31989e-16
Convergence criterion: norm(du)/norm(u) 0.0408587 < 1 %
Convergence criterion: norm(dp/)/norm(p) 14.355 > 1 %
solver residue: norm(KU-F)/norm(F)=5.91819e-12
Convergence criterion: norm(du)/norm(u) 0.0272303 < 1 %
solver residue: norm(KU-F)/norm(F)=1.33288e-16
Convergence criterion: norm(du)/norm(u) 0.0272303 < 1 %
Convergence criterion: norm(dp/)/norm(p) 12.5564 > 1 %
solver residue: norm(KU-F)/norm(F)=6.22433e-12
Convergence criterion: norm(du)/norm(u) 0.0181463 < 1 %
solver residue: norm(KU-F)/norm(F)=1.31206e-16
Convergence criterion: norm(du)/norm(u) 0.0181463 < 1 %
Convergence criterion: norm(dp/)/norm(p) 11.1577 > 1 %
solver residue: norm(KU-F)/norm(F)=6.39459e-12
Convergence criterion: norm(du)/norm(u) 0.012091 < 1 %
solver residue: norm(KU-F)/norm(F)=1.33921e-16
Convergence criterion: norm(du)/norm(u) 0.012091 < 1 %
Convergence criterion: norm(dp/)/norm(p) 10.039 > 1 %
solver residue: norm(KU-F)/norm(F)=6.64638e-12
Convergence criterion: norm(du)/norm(u) 0.00805458 < 1 %
solver residue: norm(KU-F)/norm(F)=1.34134e-16
Convergence criterion: norm(du)/norm(u) 0.00805458 < 1 %
Convergence criterion: norm(dp/)/norm(p) 9.12383 > 1 %
solver residue: norm(KU-F)/norm(F)=1.00306e-11
Convergence criterion: norm(du)/norm(u) 0.00536389 < 1 %
solver residue: norm(KU-F)/norm(F)=1.3136e-16
Convergence criterion: norm(du)/norm(u) 0.00536389 < 1 %
Convergence criterion: norm(dp/)/norm(p) 8.36144 > 1 %
solver residue: norm(KU-F)/norm(F)=5.19103e-12
Convergence criterion: norm(du)/norm(u) 0.00357027 < 1 %
solver residue: norm(KU-F)/norm(F)=1.33417e-16
Convergence criterion: norm(du)/norm(u) 0.00357027 < 1 %
Convergence criterion: norm(dp/)/norm(p) 7.71653 > 1 %
solver residue: norm(KU-F)/norm(F)=5.73058e-12
Convergence criterion: norm(du)/norm(u) 0.00237462 < 1 %
solver residue: norm(KU-F)/norm(F)=1.31409e-16
Convergence criterion: norm(du)/norm(u) 0.00237462 < 1 %
Convergence criterion: norm(dp/)/norm(p) 7.16391 > 1 %
solver residue: norm(KU-F)/norm(F)=5.64625e-12
Convergence criterion: norm(du)/norm(u) 0.00157758 < 1 %
solver residue: norm(KU-F)/norm(F)=1.29002e-16
Convergence criterion: norm(du)/norm(u) 0.00157758 < 1 %
Convergence criterion: norm(dp/)/norm(p) 6.68511 > 1 %
solver residue: norm(KU-F)/norm(F)=4.56566e-12
Convergence criterion: norm(du)/norm(u) 0.00104627 < 1 %
solver residue: norm(KU-F)/norm(F)=1.32577e-16
Convergence criterion: norm(du)/norm(u) 0.00104627 < 1 %
Convergence criterion: norm(dp/)/norm(p) 6.26627 > 1 %
solver residue: norm(KU-F)/norm(F)=6.30999e-12
Convergence criterion: norm(du)/norm(u) 0.000692088 < 1 %
solver residue: norm(KU-F)/norm(F)=1.32642e-16
Convergence criterion: norm(du)/norm(u) 0.000692088 < 1 %
Convergence criterion: norm(dp/)/norm(p) 5.8968 > 1 %
solver residue: norm(KU-F)/norm(F)=5.54397e-12
Convergence criterion: norm(du)/norm(u) 0.000455982 < 1 %
solver residue: norm(KU-F)/norm(F)=1.29666e-16
Convergence criterion: norm(du)/norm(u) 0.000455982 < 1 %
Convergence criterion: norm(dp/)/norm(p) 5.56847 > 1 %
solver residue: norm(KU-F)/norm(F)=6.67369e-12
Convergence criterion: norm(du)/norm(u) 0.000298596 < 1 %
solver residue: norm(KU-F)/norm(F)=1.35017e-16
Convergence criterion: norm(du)/norm(u) 0.000298596 < 1 %
Convergence criterion: norm(dp/)/norm(p) 5.27476 > 1 %
maximum number of nonlinear iterations (20) exceeded
total number of iterations: 19
write lock file:
FemModel initialization elapsed time: 0.00725
Total Core solution elapsed time: 1.56204
Linear solver elapsed time: 1.28232 (82%)
Total elapsed time: 0 hrs 0 min 1 sec
SUCCESS difference: 2.5e-12 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VxMINI
SUCCESS difference: 3.6e-12 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VyMINI
SUCCESS difference: 3.4e-12 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VelMINI
SUCCESS difference: 9e-13 < 1e-10 test id: 701 test name: FlowbandFSshelf field: PressureMINI
SUCCESS difference: 3.3e-12 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VxMINIcondensed
SUCCESS difference: 4.6e-12 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VyMINIcondensed
SUCCESS difference: 4.5e-12 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VelMINIcondensed
SUCCESS difference: 6.6e-13 < 1e-10 test id: 701 test name: FlowbandFSshelf field: PressureMINIcondensed
SUCCESS difference: 1.5e-11 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VxTaylorHood
SUCCESS difference: 1.8e-11 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VyTaylorHood
SUCCESS difference: 1.8e-11 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VelTaylorHood
SUCCESS difference: 1.8e-12 < 1e-10 test id: 701 test name: FlowbandFSshelf field: PressureTaylorHood
SUCCESS difference: 2.7e-11 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VxLATaylorHood
SUCCESS difference: 3.7e-11 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VyLATaylorHood
SUCCESS difference: 3.6e-11 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VelLATaylorHood
SUCCESS difference: 2.3e-12 < 1e-10 test id: 701 test name: FlowbandFSshelf field: PressureLATaylorHood
SUCCESS difference: 1.1e-10 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VxCrouzeixRaviart
SUCCESS difference: 1.4e-10 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VyCrouzeixRaviart
SUCCESS difference: 1.4e-10 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VelCrouzeixRaviart
SUCCESS difference: 1.4e-11 < 1e-10 test id: 701 test name: FlowbandFSshelf field: PressureCrouzeixRaviart
SUCCESS difference: 2.6e-11 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VxLACrouzeixRaviart
SUCCESS difference: 3.4e-11 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VyLACrouzeixRaviart
SUCCESS difference: 3.4e-11 < 9e-05 test id: 701 test name: FlowbandFSshelf field: VelLACrouzeixRaviart
SUCCESS difference: 5e-12 < 1e-10 test id: 701 test name: FlowbandFSshelf field: PressureLACrouzeixRaviart
----------------finished:701-----------------------
----------------starting:802-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
[0] ??? Error using ==> ./classes/IoModel.cpp:3145
[0] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[1] ??? Error using ==> ./classes/IoModel.cpp:3145
[1] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[2] ??? Error using ==> ./classes/IoModel.cpp:3145
[2] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
============================================================
Binary file test802.outbin not found
This typically happens when the run crashed.
Please check for error messages above or in the outlog
============================================================
WARNING: test802.outbin does not exist
Traceback (most recent call last):
File "/Users/jenkins/workspace/macOS-Silicon-Python/test/NightlyRun/runme.py", line 196, in runme
exec(compile(open('test{}.py'.format(id)).read(), 'test{}.py'.format(id), 'exec'), globals())
File "test802.py", line 31, in <module>
md = solve(md, 'Transient')
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/solve.py", line 164, in solve
md = loadresultsfromcluster(md)
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/loadresultsfromcluster.py", line 68, in loadresultsfromcluster
remove(md.private.runtimename + '.tar.gz')
AttributeError: 'NoneType' object has no attribute 'private'
FAILURE difference: N/A test id: 802 test name: ValleyGlacierLevelsetThermalSSA3d field: N/A
----------------finished:802-----------------------
----------------starting:803-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
[0] ??? Error using ==> ./classes/IoModel.cpp:3145
[0] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[1] ??? Error using ==> ./classes/IoModel.cpp:3145
[1] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[2] ??? Error using ==> ./classes/IoModel.cpp:3145
[2] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
============================================================
Binary file test803.outbin not found
This typically happens when the run crashed.
Please check for error messages above or in the outlog
============================================================
WARNING: test803.outbin does not exist
Traceback (most recent call last):
File "/Users/jenkins/workspace/macOS-Silicon-Python/test/NightlyRun/runme.py", line 196, in runme
exec(compile(open('test{}.py'.format(id)).read(), 'test{}.py'.format(id), 'exec'), globals())
File "test803.py", line 33, in <module>
md = solve(md, 'Transient')
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/solve.py", line 164, in solve
md = loadresultsfromcluster(md)
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/loadresultsfromcluster.py", line 68, in loadresultsfromcluster
remove(md.private.runtimename + '.tar.gz')
AttributeError: 'NoneType' object has no attribute 'private'
FAILURE difference: N/A test id: 803 test name: ValleyGlacierLevelsetEnthalpyHO3d field: N/A
----------------finished:803-----------------------
----------------starting:806-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
[0] ??? Error using ==> ./classes/IoModel.cpp:3145
[0] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[1] ??? Error using ==> ./classes/IoModel.cpp:3145
[1] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[2] ??? Error using ==> ./classes/IoModel.cpp:3145
[2] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
============================================================
Binary file test806.outbin not found
This typically happens when the run crashed.
Please check for error messages above or in the outlog
============================================================
WARNING: test806.outbin does not exist
Traceback (most recent call last):
File "/Users/jenkins/workspace/macOS-Silicon-Python/test/NightlyRun/runme.py", line 196, in runme
exec(compile(open('test{}.py'.format(id)).read(), 'test{}.py'.format(id), 'exec'), globals())
File "test806.py", line 46, in <module>
md = solve(md, 'Transient')
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/solve.py", line 164, in solve
md = loadresultsfromcluster(md)
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/loadresultsfromcluster.py", line 68, in loadresultsfromcluster
remove(md.private.runtimename + '.tar.gz')
AttributeError: 'NoneType' object has no attribute 'private'
FAILURE difference: N/A test id: 806 test name: SquareShelfLevelsetCalvingSSA2dLevermann field: N/A
----------------finished:806-----------------------
----------------starting:807-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
[0] ??? Error using ==> ./classes/IoModel.cpp:3145
[0] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[1] ??? Error using ==> ./classes/IoModel.cpp:3145
[1] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[2] ??? Error using ==> ./classes/IoModel.cpp:3145
[2] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
============================================================
Binary file test807.outbin not found
This typically happens when the run crashed.
Please check for error messages above or in the outlog
============================================================
WARNING: test807.outbin does not exist
Traceback (most recent call last):
File "/Users/jenkins/workspace/macOS-Silicon-Python/test/NightlyRun/runme.py", line 196, in runme
exec(compile(open('test{}.py'.format(id)).read(), 'test{}.py'.format(id), 'exec'), globals())
File "test807.py", line 43, in <module>
md = solve(md, 'Transient')
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/solve.py", line 164, in solve
md = loadresultsfromcluster(md)
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/loadresultsfromcluster.py", line 68, in loadresultsfromcluster
remove(md.private.runtimename + '.tar.gz')
AttributeError: 'NoneType' object has no attribute 'private'
FAILURE difference: N/A test id: 807 test name: SquareShelfLevelsetMeltingSSA2d field: N/A
----------------finished:807-----------------------
----------------starting:809-----------------------
----------------running-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
[0] ??? Error using ==> ./classes/IoModel.cpp:3145
[0] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[1] ??? Error using ==> ./classes/IoModel.cpp:3145
[1] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
[2] ??? Error using ==> ./classes/IoModel.cpp:3145
[2] SetFilePointerToData error message: could not find data with name "md.mmemasstransport.ids" in binary file
============================================================
Binary file test809.outbin not found
This typically happens when the run crashed.
Please check for error messages above or in the outlog
============================================================
WARNING: test809.outbin does not exist
Traceback (most recent call last):
File "/Users/jenkins/workspace/macOS-Silicon-Python/test/NightlyRun/runme.py", line 196, in runme
exec(compile(open('test{}.py'.format(id)).read(), 'test{}.py'.format(id), 'exec'), globals())
File "test809.py", line 36, in <module>
md = solve(md, 'Transient')
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/solve.py", line 164, in solve
md = loadresultsfromcluster(md)
File "/Users/jenkins/workspace/macOS-Silicon-Python/src/m/solve/loadresultsfromcluster.py", line 68, in loadresultsfromcluster
remove(md.private.runtimename + '.tar.gz')
AttributeError: 'NoneType' object has no attribute 'private'
FAILURE difference: N/A test id: 809 test name: ValleyGlacierLevelsetCalvingSSA2dCrevassedepth field: N/A
----------------finished:809-----------------------
----------------starting:902-----------------------
----------------running-----------------------
no hydrology.basal_moulin_input specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
call computational core:
write lock file:
FemModel initialization elapsed time: 0.004054
Total Core solution elapsed time: 0.09039
Linear solver elapsed time: 0.031683 (35%)
Total elapsed time: 0 hrs 0 min 0 sec
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
call computational core:
write lock file:
FemModel initialization elapsed time: 0.004078
Total Core solution elapsed time: 0.089677
Linear solver elapsed time: 0.02898 (32%)
Total elapsed time: 0 hrs 0 min 0 sec
SUCCESS difference: 1e-15 < 1e-13 test id: 902 test name: SquareNoDynHydrolgyDCTwoLayers field: SedimentWaterHead1
SUCCESS difference: 0 < 1e-13 test id: 902 test name: SquareNoDynHydrolgyDCTwoLayers field: EplWaterHead1
SUCCESS difference: 0 < 1e-13 test id: 902 test name: SquareNoDynHydrolgyDCTwoLayers field: SedimentHeadResidual1
SUCCESS difference: 1.1e-15 < 1e-13 test id: 902 test name: SquareNoDynHydrolgyDCTwoLayers field: SedimentWaterHead4
SUCCESS difference: 0 < 1e-13 test id: 902 test name: SquareNoDynHydrolgyDCTwoLayers field: EplWaterHead4
SUCCESS difference: 0 < 1e-13 test id: 902 test name: SquareNoDynHydrolgyDCTwoLayers field: SedimentHeadResidual4
SUCCESS difference: 1.6e-15 < 1e-13 test id: 902 test name: SquareNoDynHydrolgyDCTwoLayers field: SedimentWaterHead5
SUCCESS difference: 1.9e-14 < 5e-12 test id: 902 test name: SquareNoDynHydrolgyDCTwoLayers field: EplWaterHead5
SUCCESS difference: 0 < 1e-11 test id: 902 test name: SquareNoDynHydrolgyDCTwoLayers field: SedimentHeadResidual5
SUCCESS difference: 2.6e-15 < 1e-13 test id: 902 test name: SquareNoDynHydrolgyDCTwoLayers field: SedimentWaterHead9
SUCCESS difference: 5.1e-14 < 5e-12 test id: 902 test name: SquareNoDynHydrolgyDCTwoLayers field: EplWaterHead9
SUCCESS difference: 0 < 1e-11 test id: 902 test name: SquareNoDynHydrolgyDCTwoLayers field: SedimentHeadResidual9
SUCCESS difference: 4.5e-14 < 1e-13 test id: 902 test name: SquareNoDynHydrolgyDCTwoLayers field: EplWaterHead10
SUCCESS difference: 5.8e-14 < 1e-13 test id: 902 test name: SquareNoDynHydrolgyDCTwoLayers field: EplWaterHeadSubstep10
SUCCESS difference: 1.7e-15 < 1e-13 test id: 902 test name: SquareNoDynHydrolgyDCTwoLayers field: SedimentWaterHead10
SUCCESS difference: 2.3e-15 < 1e-13 test id: 902 test name: SquareNoDynHydrolgyDCTwoLayers field: SedimentWaterHeadSubstep10
----------------finished:902-----------------------
----------------starting:906-----------------------
----------------running-----------------------
no hydrology.basal_moulin_input specified: values set as zero
uploading input file and queuing script
launching solution sequence on remote cluster
Ice-sheet and Sea-level System Model (ISSM) version 4.24
(website: http://issm.jpl.nasa.gov forum: https://issm.ess.uci.edu/forum/)
call computational core:
write lock file:
FemModel initialization elapsed time: 0.0044
Total Core solution elapsed time: 2.77555
Linear solver elapsed time: 1.5693 (57%)
Total elapsed time: 0 hrs 0 min 2 sec
SUCCESS difference: 1.1e-15 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: SedimentWaterHead2
SUCCESS difference: 2.7e-14 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: EplWaterHead2
SUCCESS difference: 3.4e-14 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: SedimentHeadResidual2
SUCCESS difference: 1.7e-15 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: SedimentHeadSubstep2
SUCCESS difference: 2.4e-14 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: EplHeadSubstep2
SUCCESS difference: 0 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: HydrologySubsteps2
SUCCESS difference: 0 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: HydrologySubTime2
SUCCESS difference: 2.4e-15 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: SedimentWaterHead3
SUCCESS difference: 2.1e-14 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: EplWaterHead3
SUCCESS difference: 2e-14 < 1e-13 test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: SedimentHeadResidual3
----------------finished:906-----------------------
-----------End of python_log.log-----------
Build step 'Execute shell' marked build as failure
Recording test results
Finished: FAILURE
![[Jenkins]](/jenkins/static/a6ce7b4a/images/svgs/logo.svg){kind=logo}
