Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test449 (line 48)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 449 test name: MISMIP3DMOLHO field: N/A
----------------finished:449-----------------------
----------------starting:450-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.273965
Total Core solution elapsed time: 0.241426
Linear solver elapsed time: 0.134419 (56%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test450.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test450 (line 13)
md=solve(md,'Stressbalance');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 450 test name: SquareSheetShelfStressSSAHigherOrder field: N/A
----------------finished:450-----------------------
----------------starting:455-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.140057
Total Core solution elapsed time: 0.569466
Linear solver elapsed time: 0.458745 (81%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test455.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test455 (line 14)
md=solve(md,'Stressbalance');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 455 test name: SquareSheetShelfStressHOHigherOrder field: N/A
----------------finished:455-----------------------
----------------starting:456-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.0795936
Total Core solution elapsed time: 1.73949
Linear solver elapsed time: 1.60368 (92%)
Total elapsed time: 0 hrs 0 min 1 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test456.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test456 (line 50)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 456 test name: MISMIP3D-IntrusionMelt field: N/A
----------------finished:456-----------------------
----------------starting:460-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
Converting materials to ESTAR, keeping a Glen type relation
====== Testing Estar with SSA =====
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.454982
Total Core solution elapsed time: 0.151683
Linear solver elapsed time: 0.0862716 (57%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test460.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test460 (line 21)
md=solve(md,'Stressbalance');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 460 test name: SquareSheetShelfStressFSEstar field: N/A
----------------finished:460-----------------------
----------------starting:461-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
Converting materials to ESTAR, keeping a Glen type relation
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.300968
Total Core solution elapsed time: 0.25312
Linear solver elapsed time: 0.144004 (57%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test461.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test461 (line 22)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 461 test name: SquareSheetShelfThermalFSEstar field: N/A
----------------finished:461-----------------------
----------------starting:462-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.288359
Total Core solution elapsed time: 1.33653
Linear solver elapsed time: 0.877535 (66%)
Total elapsed time: 0 hrs 0 min 1 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test462.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test462 (line 30)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 462 test name: SquareSheetShelfAmrBamgField field: N/A
----------------finished:462-----------------------
----------------starting:463-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.243246
Total Core solution elapsed time: 2.96388
Linear solver elapsed time: 1.43125 (48%)
Total elapsed time: 0 hrs 0 min 3 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test463.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test463 (line 30)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 463 test name: SquareSheetShelfAmrBamgGroundingline field: N/A
----------------finished:463-----------------------
----------------starting:464-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.0753845
Total Core solution elapsed time: 1.30282
Linear solver elapsed time: 0.292155 (22%)
Total elapsed time: 0 hrs 0 min 1 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test464.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test464 (line 30)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 464 test name: SquareSheetShelfAmrBamgIceFront field: N/A
----------------finished:464-----------------------
----------------starting:465-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.166429
Total Core solution elapsed time: 3.22144
Linear solver elapsed time: 1.58862 (49%)
Total elapsed time: 0 hrs 0 min 3 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test465.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test465 (line 30)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 465 test name: SquareSheetShelfAmrBamgAll field: N/A
----------------finished:465-----------------------
----------------starting:470-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.13363
Total Core solution elapsed time: 1.75752
Linear solver elapsed time: 1.14528 (65%)
Total elapsed time: 0 hrs 0 min 1 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test470.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test470 (line 46)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 470 test name: PicoMeltRate field: N/A
----------------finished:470-----------------------
----------------starting:471-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.0863247
Total Core solution elapsed time: 1.90919
Linear solver elapsed time: 1.75645 (92%)
Total elapsed time: 0 hrs 0 min 2 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test471.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test471 (line 46)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 471 test name: PicopMeltRate field: N/A
----------------finished:471-----------------------
----------------starting:472-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.0988257
Total Core solution elapsed time: 0.334761
Linear solver elapsed time: 0.0845941 (25%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test472.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test472 (line 58)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 472 test name: ISMIP6MeltRateTest field: N/A
----------------finished:472-----------------------
----------------starting:473-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.207835
Total Core solution elapsed time: 1.7728
Linear solver elapsed time: 0.201348 (11%)
Total elapsed time: 0 hrs 0 min 1 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test473.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test473 (line 54)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 473 test name: ISMIP6MeltRateTest_HO field: N/A
----------------finished:473-----------------------
----------------starting:474-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.188713
Total Core solution elapsed time: 3.77298
Linear solver elapsed time: 2.72995 (72%)
Total elapsed time: 0 hrs 0 min 3 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test474.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test474 (line 47)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 474 test name: PicoMeltRate_HO field: N/A
----------------finished:474-----------------------
----------------starting:475-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.562886
Total Core solution elapsed time: 6.27371
Linear solver elapsed time: 4.41918 (70%)
Total elapsed time: 0 hrs 0 min 6 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test475.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test475 (line 47)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 475 test name: PicopMeltRate_HO field: N/A
----------------finished:475-----------------------
----------------starting:476-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.309018
Total Core solution elapsed time: 4.42855
Linear solver elapsed time: 3.00138 (68%)
Total elapsed time: 0 hrs 0 min 4 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test476.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test476 (line 41)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 476 test name: BeckmannGoosseMeltRate_HO field: N/A
----------------finished:476-----------------------
----------------starting:480-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.161923
Total Core solution elapsed time: 2.70271
Linear solver elapsed time: 2.12066 (78%)
Total elapsed time: 0 hrs 0 min 2 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test480.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test480 (line 13)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 480 test name: TransientFrictionTsai field: N/A
----------------finished:480-----------------------
----------------starting:481-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.283321
Total Core solution elapsed time: 3.26586
Linear solver elapsed time: 2.35949 (72%)
Total elapsed time: 0 hrs 0 min 3 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test481.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test481 (line 13)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 481 test name: TransientFrictionSchoof field: N/A
----------------finished:481-----------------------
----------------starting:491-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.382055
Total Core solution elapsed time: 0.85277
Linear solver elapsed time: 0.694625 (81%)
Total elapsed time: 0 hrs 0 min 1 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test491.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test491 (line 19)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 491 test name: SquareSheetShelfTranMeltArtDiff field: N/A
----------------finished:491-----------------------
----------------starting:492-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.157475
Total Core solution elapsed time: 0.686163
Linear solver elapsed time: 0.566976 (83%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test492.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test492 (line 19)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 492 test name: SquareSheetShelfTranMeltStreamlineUpwind field: N/A
----------------finished:492-----------------------
----------------starting:493-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.145994
Total Core solution elapsed time: 1.4312
Linear solver elapsed time: 1.29222 (90%)
Total elapsed time: 0 hrs 0 min 1 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test493.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test493 (line 20)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 493 test name: SquareSheetShelfTranMeltDG field: N/A
----------------finished:493-----------------------
----------------starting:494-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.0847429
Total Core solution elapsed time: 0.359991
Linear solver elapsed time: 0.292753 (81%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test494.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test494 (line 19)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 494 test name: SquareSheetShelfTranMeltFCT field: N/A
----------------finished:494-----------------------
----------------starting:495-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.129892
Total Core solution elapsed time: 0.500528
Linear solver elapsed time: 0.401552 (80%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test495.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test495 (line 19)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 495 test name: SquareSheetShelfTranMeltSUPG field: N/A
----------------finished:495-----------------------
----------------starting:501-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.067272
Total Core solution elapsed time: 0.0418158
Linear solver elapsed time: 0.0321092 (77%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test501.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test501 (line 7)
md=solve(md,'Stressbalance');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 501 test name: PigStressSSA2d field: N/A
----------------finished:501-----------------------
----------------starting:502-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.115
Total Core solution elapsed time: 0.182625
Linear solver elapsed time: 0.110307 (60%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test502.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test502 (line 8)
md=solve(md,'Stressbalance');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 502 test name: PigStressHO field: N/A
----------------finished:502-----------------------
----------------starting:503-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.138194
Total Core solution elapsed time: 1.41186
Linear solver elapsed time: 0.583303 (41%)
Total elapsed time: 0 hrs 0 min 1 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test503.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test503 (line 8)
md=solve(md,'Stressbalance');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 503 test name: PigStressFS field: N/A
----------------finished:503-----------------------
----------------starting:504-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
Warning: expecting coordinates in polar stereographic (Std Latitude: 71S Meridian: 0)
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.10323
Total Core solution elapsed time: 0.101061
Linear solver elapsed time: 0.0583451 (58%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test504.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test504 (line 11)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 504 test name: PigTranSSA2d field: N/A
----------------finished:504-----------------------
----------------starting:505-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.548193
Total Core solution elapsed time: 0.57006
Linear solver elapsed time: 0.303085 (53%)
Total elapsed time: 0 hrs 0 min 1 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test505.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test505 (line 8)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 505 test name: PigTranSSA3d field: N/A
----------------finished:505-----------------------
----------------starting:506-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.459652
Total Core solution elapsed time: 0.675937
Linear solver elapsed time: 0.278329 (41%)
Total elapsed time: 0 hrs 0 min 1 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test506.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test506 (line 10)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 506 test name: PigTranHO field: N/A
----------------finished:506-----------------------
----------------starting:507-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.237515
Total Core solution elapsed time: 1.82348
Linear solver elapsed time: 1.27493 (70%)
Total elapsed time: 0 hrs 0 min 2 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test507.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test507 (line 9)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 507 test name: PigTranFS field: N/A
----------------finished:507-----------------------
----------------starting:508-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
maximum number of iterations (100) exceeded
write lock file:
FemModel initialization elapsed time: 0.460385
Total Core solution elapsed time: 4.49079
Linear solver elapsed time: 1.01938 (23%)
Total elapsed time: 0 hrs 0 min 4 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test508.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test508 (line 9)
md=solve(md,'Steadystate');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 508 test name: PigSteaSSA3d field: N/A
----------------finished:508-----------------------
----------------starting:509-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.295741
Total Core solution elapsed time: 4.52433
Linear solver elapsed time: 2.72342 (60%)
Total elapsed time: 0 hrs 0 min 4 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test509.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test509 (line 10)
md=solve(md,'Steadystate');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 509 test name: PigSteaHO field: N/A
----------------finished:509-----------------------
----------------starting:510-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.445747
Total Core solution elapsed time: 1.91537
Linear solver elapsed time: 0.886 (46%)
Total elapsed time: 0 hrs 0 min 2 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test510.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test510 (line 9)
md=solve(md,'Steadystate');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 510 test name: PigSteaFS field: N/A
----------------finished:510-----------------------
----------------starting:511-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
NOTE: using observed velocities to create constraints along new boundary
INFO: the outlog will look better if only md.verbose.control is turned on
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
x | Cost function f(x) | List of contributions
====================== step 1/2 ===============================
x = 0 | f(x) = 0.0537942 | 0.0537942
x = 1 | f(x) = 0.04886803 | 0.04886803
====================== step 2/2 ===============================
x = 0 | f(x) = 0.04875168 | 0.04875168
x = 1 | f(x) = 0.05273747 | 0.05273747
x = 0.381966 | f(x) = 0.04920111 | 0.04920111
x = 0.618034 | f(x) = 0.05036058 | 0.05036058
write lock file:
FemModel initialization elapsed time: 0.124587
Total Core solution elapsed time: 0.520533
Linear solver elapsed time: 0.0501215 (9.6%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test511.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test511 (line 27)
md=solve(md,'Stressbalance');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 511 test name: PigCMBFS field: N/A
----------------finished:511-----------------------
----------------starting:512-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
INFO: the outlog will look better if only md.verbose.control is turned on
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
x | Cost function f(x) | List of contributions
====================== step 1/2 ===============================
x = 0 | f(x) = 125.7301 | 125.7294 0.0006420665
x = 1 | f(x) = 119.1969 | 119.1962 0.0006447865
====================== step 2/2 ===============================
x = 0 | f(x) = 119.1154 | 119.1148 0.0006447865
x = 1 | f(x) = 112.5636 | 112.563 0.0006652195
write lock file:
FemModel initialization elapsed time: 0.19295
Total Core solution elapsed time: 1.31508
Linear solver elapsed time: 0.887371 (67%)
Total elapsed time: 0 hrs 0 min 1 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test512.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test512 (line 22)
md=solve(md,'Stressbalance');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 512 test name: PigCMDragHO field: N/A
----------------finished:512-----------------------
----------------starting:513-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
INFO: the outlog will look better if only md.verbose.control is turned on
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
x | Cost function f(x) | List of contributions
====================== step 1/2 ===============================
x = 0 | f(x) = 99.51715 | 99.51669 0.0004575168
x = 1 | f(x) = 93.99829 | 93.99784 0.0004559883
====================== step 2/2 ===============================
x = 0 | f(x) = 93.78083 | 93.78038 0.0004559883
x = 1 | f(x) = 88.30076 | 88.3003 0.0004621097
write lock file:
FemModel initialization elapsed time: 0.186514
Total Core solution elapsed time: 3.63288
Linear solver elapsed time: 2.49878 (69%)
Total elapsed time: 0 hrs 0 min 3 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test513.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test513 (line 24)
md=solve(md,'Steadystate');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 513 test name: PigCMDragSteaSSA3d field: N/A
----------------finished:513-----------------------
----------------starting:514-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
SUCCESS difference: 0 < 2e-10 test id: 514 test name: PigBamgMesh field: x1
SUCCESS difference: 0 < 7e-10 test id: 514 test name: PigBamgMesh field: y1
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: x2
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: y2
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: x3
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: y3
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: x4
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: y4
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: x5
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: y5
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: x6
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: y6
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: x7
SUCCESS difference: 0 < 1e-13 test id: 514 test name: PigBamgMesh field: y7
----------------finished:514-----------------------
----------------starting:515-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.37322
Total Core solution elapsed time: 0.310055
Linear solver elapsed time: 0.194522 (63%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test515.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test515 (line 14)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 515 test name: PigTherTranSUPG field: N/A
----------------finished:515-----------------------
----------------starting:516-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.260328
Total Core solution elapsed time: 0.113545
Linear solver elapsed time: 0.0262743 (23%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test516.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test516 (line 11)
md=solve(md,'Thermal');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 516 test name: PigTherSteaSUPG field: N/A
----------------finished:516-----------------------
----------------starting:517-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
NOTE: using observed velocities to create constraints along new boundary
INFO: the outlog will look better if only md.verbose.control is turned on
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Iter Cost function Grad. norm List of contributions
1 f(x)= 0.054509 1.32e-07 0.05451 6.124e-15
2 f(x)=7.0726e+11 1.78e+06 0.05377 7.073e+11
3 f(x)=7.0726e+07 1.78e+04 0.05376 7.073e+07
4 f(x)=1.7681e+05 892 0.05376 1.768e+05
5 f(x)= 11051 223 0.05376 1.105e+04
6 f(x)= 994.64 66.9 0.05376 994.6
7 f(x)= 89.566 20.1 0.05376 89.51
8 f(x)= 8.1099 6.02 0.05376 8.056
9 f(x)= 0.77881 1.81 0.05376 0.7251
10 f(x)= 0.11901 0.542 0.05376 0.06525
11 f(x)= 0.059631 0.163 0.05376 0.005873
stopped on dxmin during line search
write lock file:
FemModel initialization elapsed time: 0.128631
Total Core solution elapsed time: 1.40415
Linear solver elapsed time: 0.160369 (11%)
Total elapsed time: 0 hrs 0 min 1 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test517.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test517 (line 29)
md=solve(md,'Stressbalance');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 517 test name: PigCMBFSm1qn3 field: N/A
----------------finished:517-----------------------
----------------starting:518-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.0773326
Total Core solution elapsed time: 0.451077
Linear solver elapsed time: 0.406926 (90%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test518.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test518 (line 9)
md=solve(md,'Stressbalance');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 518 test name: PigStressMOLHO2d field: N/A
----------------finished:518-----------------------
----------------starting:519-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
Warning: expecting coordinates in polar stereographic (Std Latitude: 71S Meridian: 0)
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.260025
Total Core solution elapsed time: 0.631035
Linear solver elapsed time: 0.409128 (65%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test519.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test519 (line 12)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 519 test name: PigTranMOLHO2d field: N/A
----------------finished:519-----------------------
----------------starting:520-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
Warning: expecting coordinates in polar stereographic (Std Latitude: 71S Meridian: 0)
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.206407
Total Core solution elapsed time: 0.174089
Linear solver elapsed time: 0.152089 (87%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test520.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test520 (line 17)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 520 test name: PigTran-IntrusionMelt field: N/A
----------------finished:520-----------------------
----------------starting:530-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.053476
Total Core solution elapsed time: 0.0371126
Linear solver elapsed time: 0.0150495 (41%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test530.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test530 (line 7)
md=solve(md,'Balancevelocity');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 530 test name: PigBalVel1 field: N/A
----------------finished:530-----------------------
----------------starting:531-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.148277
Total Core solution elapsed time: 0.0847123
Linear solver elapsed time: 0.0146332 (17%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test531.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test531 (line 9)
md=solve(md,'Balancevelocity');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 531 test name: PigBalVel2 field: N/A
----------------finished:531-----------------------
----------------starting:540-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.161598
Total Core solution elapsed time: 3.18679
Linear solver elapsed time: 0.907834 (28%)
Total elapsed time: 0 hrs 0 min 3 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test540.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test540 (line 24)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 540 test name: PigTranCalvingDevSSA2d field: N/A
----------------finished:540-----------------------
----------------starting:541-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.596666
Total Core solution elapsed time: 32.319
Linear solver elapsed time: 5.43203 (17%)
Total elapsed time: 0 hrs 0 min 32 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test541.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test541 (line 24)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 541 test name: PigTranCalvingDevHO3d field: N/A
----------------finished:541-----------------------
----------------starting:542-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.106078
Total Core solution elapsed time: 4.56318
Linear solver elapsed time: 2.762 (61%)
Total elapsed time: 0 hrs 0 min 4 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test542.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test542 (line 43)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 542 test name: PigTranFrontalforcingsrignot field: N/A
----------------finished:542-----------------------
----------------starting:543-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
stochasticforcing.stocahstictimestep not specified: set to md.timestepping.time_step
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.180054
Total Core solution elapsed time: 7.28318
Linear solver elapsed time: 4.16212 (57%)
Total elapsed time: 0 hrs 0 min 7 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test543.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test543 (line 123)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 543 test name: PigTranRignotarma field: N/A
----------------finished:543-----------------------
----------------starting:544-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
smb.lapserates not specified: set to 0
stochasticforcing.stocahstictimestep not specified: set to md.timestepping.time_step
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.355807
Total Core solution elapsed time: 2.57369
Linear solver elapsed time: 1.34341 (52%)
Total elapsed time: 0 hrs 0 min 2 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test544.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test544 (line 99)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 544 test name: PigTranARMAandStochasticforcings field: N/A
----------------finished:544-----------------------
----------------starting:545-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
stochasticforcing.stocahstictimestep not specified: set to md.timestepping.time_step
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.286454
Total Core solution elapsed time: 2.21711
Linear solver elapsed time: 1.42597 (64%)
Total elapsed time: 0 hrs 0 min 2 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test545.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test545 (line 89)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 545 test name: PigTranStochasticforcingCovariance field: N/A
----------------finished:545-----------------------
----------------starting:546-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
smb.lapserates not specified: set to 0
stochasticforcing.stocahstictimestep not specified: set to md.timestepping.time_step
WARNING: md.timestepping.interp_forcing is 1, but be aware that there is no interpolation between covariance matrices
the changes between covariance matrices occur at the time steps specified in md.stochasticforcing.timecovariance
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.157778
Total Core solution elapsed time: 2.71999
Linear solver elapsed time: 1.47434 (54%)
Total elapsed time: 0 hrs 0 min 2 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test546.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test546 (line 109)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 546 test name: PigTranMultcovStochasticforcings field: N/A
----------------finished:546-----------------------
----------------starting:550-----------------------
boundary conditions for stressbalance model: spc set as observed velocities
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 1.78595
Total Core solution elapsed time: 86.9828
Linear solver elapsed time: 74.85 (86%)
Total elapsed time: 0 hrs 1 min 28 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test550.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test550 (line 51)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 550 test name: PigShakti field: N/A
----------------finished:550-----------------------
----------------starting:601-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.126635
Total Core solution elapsed time: 0.0074441
Linear solver elapsed time: 0.0043902 (59%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test601.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test601 (line 7)
md=solve(md,'Masstransport');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 601 test name: 79NorthMasstransp2d field: N/A
----------------finished:601-----------------------
----------------starting:602-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.048645
Total Core solution elapsed time: 0.0176156
Linear solver elapsed time: 0.0132949 (75%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test602.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test602 (line 10)
md=solve(md,'Masstransport');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 602 test name: 79NorthMasstransp2dDG field: N/A
----------------finished:602-----------------------
----------------starting:603-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.184057
Total Core solution elapsed time: 0.0100204
Linear solver elapsed time: 0.0038917 (39%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test603.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test603 (line 8)
md=solve(md,'Masstransport');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 603 test name: 79NorthMasstransp3d field: N/A
----------------finished:603-----------------------
----------------starting:604-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.0743249
Total Core solution elapsed time: 0.0265963
Linear solver elapsed time: 0.0166133 (62%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test604.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test604 (line 7)
md=solve(md,'SurfaceSlope');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 604 test name: 79NorthSurfSlop2d field: N/A
----------------finished:604-----------------------
----------------starting:605-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.135353
Total Core solution elapsed time: 0.365066
Linear solver elapsed time: 0.0495818 (14%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test605.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test605 (line 8)
md=solve(md,'SurfaceSlope');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 605 test name: 79NorthSurfSlop3d field: N/A
----------------finished:605-----------------------
----------------starting:606-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.0307798
Total Core solution elapsed time: 0.0264735
Linear solver elapsed time: 0.0210503 (80%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test606.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test606 (line 7)
md=solve(md,'BedSlope');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 606 test name: 79NorthBedSlop2d field: N/A
----------------finished:606-----------------------
----------------starting:607-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.0576763
Total Core solution elapsed time: 0.0460005
Linear solver elapsed time: 0.0389523 (85%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test607.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test607 (line 8)
md=solve(md,'BedSlope');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 607 test name: 79NorthBedSlop3d field: N/A
----------------finished:607-----------------------
----------------starting:608-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.03436
Total Core solution elapsed time: 0.0075369
Linear solver elapsed time: 0.0047305 (63%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test608.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test608 (line 7)
md=solve(md,'Balancethickness');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 608 test name: 79NorthBalThic2d field: N/A
----------------finished:608-----------------------
----------------starting:610-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.104984
Total Core solution elapsed time: 0.0818397
Linear solver elapsed time: 0 (0%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test610.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test610 (line 22)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 610 test name: 79NorthPISMhydro field: N/A
----------------finished:610-----------------------
----------------starting:611-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
INFO: the outlog will look better if only md.verbose.control is turned on
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
x | Cost function f(x) | List of contributions
====================== step 1/2 ===============================
x = 0 | f(x) = 5.576527e+15 | 5.576527e+15
x = 1 | f(x) = 2.800818e+15 | 2.800818e+15
====================== step 2/2 ===============================
x = 0 | f(x) = 2.800818e+15 | 2.800818e+15
x = 1 | f(x) = 9.878839e+14 | 9.878839e+14
write lock file:
FemModel initialization elapsed time: 0.0506246
Total Core solution elapsed time: 0.267991
Linear solver elapsed time: 0.125044 (47%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test611.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test611 (line 22)
md=solve(md,'Balancethickness');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 611 test name: 79NorthCMBalThic2dCG field: N/A
----------------finished:611-----------------------
----------------starting:612-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.0708225
Total Core solution elapsed time: 0.444165
Linear solver elapsed time: 0.36931 (83%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test612.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test612 (line 28)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 612 test name: 79NorthPISMhydrofriction field: N/A
----------------finished:612-----------------------
----------------starting:613-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
NOTE: using initial velocities to create constraints along new boundary
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
preparing initial solution
x | Cost function f(x) | List of contributions
====================== step 1/2 ===============================
x = 0 | f(x) = 5.931532e+14 | 5.931532e+14
x = 1 | f(x) = 5.011022e+14 | 5.011022e+14
====================== step 2/2 ===============================
x = 0 | f(x) = 5.011022e+14 | 5.011022e+14
x = 1 | f(x) = 4.265126e+14 | 4.265126e+14
preparing final solution
write lock file:
FemModel initialization elapsed time: 0.120051
Total Core solution elapsed time: 0.170123
Linear solver elapsed time: 0.0531575 (31%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test613.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test613 (line 29)
md=solve(md,'Balancethickness');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 613 test name: 79NorthCMBalThicVxVy field: N/A
----------------finished:613-----------------------
----------------starting:621-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
stochasticforcing.stocahstictimestep not specified: set to md.timestepping.time_step
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.495654
Total Core solution elapsed time: 2.02201
Linear solver elapsed time: 1.79887 (89%)
Total elapsed time: 0 hrs 0 min 2 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test621.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test621 (line 49)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 621 test name: 79NorthStochFrictionWaterPressure field: N/A
----------------finished:621-----------------------
----------------starting:622-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
smb.lapserates not specified: set to 0
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.175818
Total Core solution elapsed time: 6.55493
Linear solver elapsed time: 5.39139 (82%)
Total elapsed time: 0 hrs 0 min 6 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test622.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test622 (line 85)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 622 test name: 79NorthHydrologyArmapw field: N/A
----------------finished:622-----------------------
----------------starting:801-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.318789
Total Core solution elapsed time: 2.21738
Linear solver elapsed time: 1.6982 (77%)
Total elapsed time: 0 hrs 0 min 2 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test801.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test801 (line 17)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 801 test name: ValleyGlacierLevelsetSSA2d field: N/A
----------------finished:801-----------------------
----------------starting:802-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.867116
Total Core solution elapsed time: 7.86836
Linear solver elapsed time: 3.71807 (47%)
Total elapsed time: 0 hrs 0 min 8 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test802.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test802 (line 22)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 802 test name: ValleyGlacierLevelsetThermalSSA3d field: N/A
----------------finished:802-----------------------
----------------starting:803-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.585228
Total Core solution elapsed time: 11.1565
Linear solver elapsed time: 6.5396 (59%)
Total elapsed time: 0 hrs 0 min 11 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test803.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test803 (line 24)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 803 test name: ValleyGlacierLevelsetEnthalpyHO3d field: N/A
----------------finished:803-----------------------
----------------starting:804-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.147665
Total Core solution elapsed time: 2.00993
Linear solver elapsed time: 1.68284 (84%)
Total elapsed time: 0 hrs 0 min 2 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test804.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test804 (line 20)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 804 test name: ValleyGlacierLevelsetCalvingSIA2d field: N/A
----------------finished:804-----------------------
----------------starting:805-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.901542
Total Core solution elapsed time: 12.3108
Linear solver elapsed time: 6.83127 (55%)
Total elapsed time: 0 hrs 0 min 13 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test805.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test805 (line 29)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 805 test name: ValleyGlacierLevelsetEnthCalvingHO3d field: N/A
----------------finished:805-----------------------
----------------starting:806-----------------------
boundary conditions for stressbalance model: spc set as zero
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.265688
Total Core solution elapsed time: 3.49291
Linear solver elapsed time: 1.83738 (53%)
Total elapsed time: 0 hrs 0 min 3 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test806.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test806 (line 37)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 806 test name: SquareShelfLevelsetCalvingSSA2dLevermann field: N/A
----------------finished:806-----------------------
----------------starting:807-----------------------
boundary conditions for stressbalance model: spc set as zero
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.30201
Total Core solution elapsed time: 2.59871
Linear solver elapsed time: 2.18225 (84%)
Total elapsed time: 0 hrs 0 min 2 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test807.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test807 (line 33)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 807 test name: SquareShelfLevelsetMeltingSSA2d field: N/A
----------------finished:807-----------------------
----------------starting:808-----------------------
boundary conditions for stressbalance model: spc set as zero
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.267578
Total Core solution elapsed time: 4.05899
Linear solver elapsed time: 3.03818 (75%)
Total elapsed time: 0 hrs 0 min 4 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test808.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test808 (line 36)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 808 test name: SquareShelfLevelsetCalvingSSA2dMinThickness field: N/A
----------------finished:808-----------------------
----------------starting:809-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Found 0 to flip
Found 3 to flip
Found 0 to flip
Found 4 to flip
Found 0 to flip
Found 0 to flip
Found 4 to flip
Found 0 to flip
Found 0 to flip
Found 0 to flip
Found 0 to flip
Found 0 to flip
Found 0 to flip
Found 0 to flip
Found 0 to flip
Found 0 to flip
Found 0 to flip
Found 0 to flip
Found 0 to flip
Found 0 to flip
Found 0 to flip
Found 0 to flip
Found 0 to flip
Found 0 to flip
Found 3 to flip
Found 0 to flip
Found 0 to flip
Found 0 to flip
Found 0 to flip
write lock file:
FemModel initialization elapsed time: 0.1016
Total Core solution elapsed time: 17.1644
Linear solver elapsed time: 12.1393 (71%)
Total elapsed time: 0 hrs 0 min 17 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test809.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test809 (line 26)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 809 test name: ValleyGlacierLevelsetCalvingSSA2dCrevassedepth field: N/A
----------------finished:809-----------------------
----------------starting:810-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.166352
Total Core solution elapsed time: 4.05812
Linear solver elapsed time: 2.7258 (67%)
Total elapsed time: 0 hrs 0 min 4 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test810.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test810 (line 18)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 810 test name: ValleyGlacierLevelsetMOLHO2d field: N/A
----------------finished:810-----------------------
----------------starting:811-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.127858
Total Core solution elapsed time: 4.81666
Linear solver elapsed time: 3.53708 (73%)
Total elapsed time: 0 hrs 0 min 4 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test811.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test811 (line 21)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 811 test name: ValleyGlacierLevelsetCalvingMOLHO2d field: N/A
----------------finished:811-----------------------
----------------starting:812-----------------------
boundary conditions for stressbalance model: spc set as zero
no smb.mass_balance specified: values set as zero
no basalforcings.groundedice_melting_rate specified: values set as zero
no basalforcings.floatingice_melting_rate specified: values set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.117955
Total Core solution elapsed time: 5.22161
Linear solver elapsed time: 3.76128 (72%)
Total elapsed time: 0 hrs 0 min 5 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test812.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test812 (line 38)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 812 test name: SquareShelfLevelsetCalvingMOLHO2dLevermann field: N/A
----------------finished:812-----------------------
----------------starting:813-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.0868506
Total Core solution elapsed time: 0.709523
Linear solver elapsed time: 0.61886 (87%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test813.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test813 (line 44)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 813 test name: SquareShelfLevelsetKillberg field: N/A
----------------finished:813-----------------------
----------------starting:814-----------------------
boundary conditions for stressbalance model: spc set as zero
no balancethickness.thickening_rate specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
Found 38 to flip
Found 44 to flip
Found 51 to flip
Found 53 to flip
Found 47 to flip
Found 46 to flip
Found 41 to flip
Found 34 to flip
Found 30 to flip
Found 21 to flip
Found 15 to flip
Found 2 to flip
Found 0 to flip
Found 0 to flip
Found 0 to flip
Found 0 to flip
Found 0 to flip
Found 0 to flip
Found 0 to flip
Found 0 to flip
Found 0 to flip
Found 0 to flip
Found 0 to flip
Found 0 to flip
Found 0 to flip
Found 0 to flip
Found 0 to flip
Found 0 to flip
Found 0 to flip
Found 0 to flip
Found 0 to flip
Found 0 to flip
write lock file:
FemModel initialization elapsed time: 0.312787
Total Core solution elapsed time: 10.719
Linear solver elapsed time: 6.89711 (64%)
Total elapsed time: 0 hrs 0 min 11 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test814.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test814 (line 27)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 814 test name: SSA2dCDCalvingButtressing field: N/A
----------------finished:814-----------------------
----------------starting:900-----------------------
no hydrology.basal_moulin_input specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.138786
Total Core solution elapsed time: 2.19088
Linear solver elapsed time: 0.51646 (24%)
Total elapsed time: 0 hrs 0 min 2 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test900.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test900 (line 38)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 900 test name: SquareNoDynUnConfinedHydroDC field: N/A
----------------finished:900-----------------------
----------------starting:901-----------------------
no hydrology.basal_moulin_input specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.0449832
Total Core solution elapsed time: 0.0451803
Linear solver elapsed time: 0.0138068 (31%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test901.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test901 (line 25)
md=solve(md,'Hydrology');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 901 test name: SquareNoDynHydrologyDCOneLayer field: N/A
----------------finished:901-----------------------
----------------starting:902-----------------------
no hydrology.basal_moulin_input specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.069876
Total Core solution elapsed time: 0.522647
Linear solver elapsed time: 0.154316 (30%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test902.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test902 (line 36)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 902 test name: SquareSheetHydrologyDCTwoLayers field: N/A
----------------finished:902-----------------------
----------------starting:903-----------------------
no hydrology.basal_moulin_input specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.0900507
Total Core solution elapsed time: 0.0640356
Linear solver elapsed time: 0.0151877 (24%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test903.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test903 (line 27)
md=solve(md,'Hydrology');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 903 test name: SquareNoDynExtrudedHydrologyDCOneLayer field: N/A
----------------finished:903-----------------------
----------------starting:904-----------------------
no hydrology.basal_moulin_input specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.14693
Total Core solution elapsed time: 0.756844
Linear solver elapsed time: 0.147256 (19%)
Total elapsed time: 0 hrs 0 min 0 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test904.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test904 (line 35)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 904 test name: SquareNoDynExtrudedHydrologyDCTwoLayers field: N/A
----------------finished:904-----------------------
----------------starting:905-----------------------
no hydrology.basal_moulin_input specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.0839687
Total Core solution elapsed time: 2.48882
Linear solver elapsed time: 0.446086 (18%)
Total elapsed time: 0 hrs 0 min 2 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test905.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test905 (line 55)
md=solve(md,'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 905 test name: SquareNoDynHydrologyDCSmbCoupled field: N/A
----------------finished:905-----------------------
----------------starting:906-----------------------
no hydrology.basal_moulin_input specified: values set as zero
launching solution sequence
Ice-sheet and Sea-level System Model (ISSM) version 2026.2
GitHub: https://github.com/ISSMteam/ISSM/
Documentation: https://issmteam.github.io/ISSM-Documentation/
write lock file:
FemModel initialization elapsed time: 0.0849279
Total Core solution elapsed time: 13.3611
Linear solver elapsed time: 6.48952 (49%)
Total elapsed time: 0 hrs 0 min 13 sec
Error using loadresultsfromdisk
=========================================================================
Binary file test906.outbin not found
This typically results from an error encountered during the simulation
Please check for error messages above or in the outlog
=========================================================================
Error in loadresultsfromcluster (line 50)
md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
Error in solve (line 204)
md=loadresultsfromcluster(md);
Error in test906 (line 69)
md=solve(md, 'Transient');
Error in run (line 99)
evalin('caller', strcat(script, ';'));
Error in runme (line 156)
run(['test' num2str(id)]);
Error in matlab_run2 (line 3)
runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 906 test name: SquareNoDynHydrologyDCtimeadapt field: N/A
----------------finished:906-----------------------
MATLABEXITEDCORRECTLY
-----------End of matlab_log.log-----------
Build step 'Execute shell' marked build as failure
Recording test results
Finished: FAILURE
