+++ Running case: MATLAB-517
+++ working dir: /c/Users/jenkins/Jenkins/workspace/Windows-Basic/nightlylog
| boundary conditions for stressbalance model: spc set as observed velocities
| no smb.mass_balance specified: values set as zero
| no basalforcings.groundedice_melting_rate specified: values set as zero
| no basalforcings.floatingice_melting_rate specified: values set as zero
| no balancethickness.thickening_rate specified: values set as zero
| NOTE: using observed velocities to create constraints along new boundary
| INFO: the outlog will look better if only md.verbose.control is turned on
| launching solution sequence
| Ice-sheet and Sea-level System Model (ISSM) version 2026.2
| GitHub: https://github.com/ISSMteam/ISSM/
| Documentation: https://issmteam.github.io/ISSM-Documentation/
| Iter Cost function Grad. norm List of contributions
| 1 f(x)= 0.054509 1.32e-07 0.05451 6.124e-15
| 2 f(x)=7.0726e+11 1.78e+06 0.05377 7.073e+11
| 3 f(x)=7.0726e+07 1.78e+04 0.05376 7.073e+07
| 4 f(x)=1.7681e+05 892 0.05376 1.768e+05
| 5 f(x)= 11051 223 0.05376 1.105e+04
| 6 f(x)= 994.64 66.9 0.05376 994.6
| 7 f(x)= 89.566 20.1 0.05376 89.51
| 8 f(x)= 8.1099 6.02 0.05376 8.056
| 9 f(x)= 0.77881 1.81 0.05376 0.7251
| 10 f(x)= 0.11901 0.542 0.05376 0.06525
| 11 f(x)= 0.059631 0.163 0.05376 0.005873
| stopped on dxmin during line search
| write lock file:
| FemModel initialization elapsed time: 0.128631
| Total Core solution elapsed time: 1.40415
| Linear solver elapsed time: 0.160369 (11%)
| Total elapsed time: 0 hrs 0 min 1 sec
| Error using loadresultsfromdisk
| =========================================================================
| Binary file test517.outbin not found
| This typically results from an error encountered during the simulation
| Please check for error messages above or in the outlog
| =========================================================================
| Error in loadresultsfromcluster (line 50)
| md=loadresultsfromdisk(md,d.miscellaneous.name '.outbin']);
| Error in solve (line 204)
| md=loadresultsfromcluster(md);
| Error in test517 (line 29)
| md=solve(md,'Stressbalance');
| Error in run (line 99)
| evalin('caller', strcat(script, ';'));
| Error in runme (line 156)
| run(['test' num2str(id)]);
| Error in matlab_run2 (line 3)
| runme('exclude',[IdFromString('Dakota'),125,126,129,435,701,702,703],'output','nightly','rank',2,'numprocs',2);FAILURE difference: N/A test id: 517 test name: PigCMBFSm1qn3 field: N/A
+++ exit code: 0
